pH-Sensitive Oscillatory Motion of a Urease Motor on the Urea Aqueous Phase

A self-propelled object coupled with an enzyme reaction between urease and urea was investigated at the air/aqueous interface. A plastic object that was fixed to a urease-immobilized filter paper was used as a self-propelled object, termed a urease motor, placed on an aqueous urea solution. The driving force of the urease motor is the difference in the surface tension around the object. Oscillatory motion or no motion was triggered depending on the initial pH of the urea solution. Both the frequency and maximum speed of the oscillatory motion varied depending on the initial pH of the water phase. The mechanisms underlying the oscillatory motion and no motion were discussed in relation to the bell-shaped enzyme activity of urease in the enzyme reaction and the surface tension around the urease motor.     

Stable all-optical formation of Bose–Einstein condensate using pointing-stabilized optical trapping beams

By stabilizing the beam pointing of optical trapping beams, we have succeeded in stable formation of Bose–Einstein condensate (BEC) of ⁸⁷Rb with all-optical method. The thermal effect of acousto-optic modulator (AOM) is usually one of the most serious problems to induce beam-pointing instability, especially for high power CO₂ laser. By passing the beam through AOM twice, we have improved the beam pointing from about 4.8 mrad to less than 0.4 mrad, which has been experimentally confirmed to be small enough to stably form BEC at the crossed region of CO₂ lasers as well as to perform experiments using an optical lattice which might have been affected by beam-pointing instability. PACS 32.80.Pj; 42.79.Jq; 03.75.Mn     

Application of total reflection X-ray fluorescence spectrometry to small glass fragments.

Total reflection X-ray fluorescence spectrometry (TXRF) has been applied for trace elemental analysis of small glass fragments. A small glass sample (a fragment with weight less than 0.5 mg) was decomposed by 100 microg of HF/HNO3 acid; the material was condensed to 10 microl and was dried on a Si wafer. Since the size of the dried residue on the Si wafer was less than 1 cm in diameter, an incident X-ray beam with about 1 cm in width could effectively excite elemental components in such a small glass fragment. The precision of the present technique was checked by analyzing the glass fragments (<0.5 mg) from NIST SRM612; the relative standard deviations (RSD) of less than 8.1% were achieved for elemental ratios that were normalized by Sr. Fragments (<0.5 mg) obtained from 23 figured sheet glasses were used as samples for estimating the utility of this technique to forensic discrimination. Comparison of five elemental ratios of Ti/Sr, Mn/Sr, Zn/Sr, Rb/Sr, and Pb/Sr calculated from X-ray fluorescence spectra was effective in distinguishing glass fragments that could not be differentiated by their refractive indexes (RI).     

Precise synthesis of porphyrin array scaffolding polyisocyanides

Aryl isocyanides bearing free‐base and metallo‐porphyrins were prepared and polymerized with a Pd–Pt μ‐ethynediyl complex as the initiator to give polymers with narrow polydispersity indices. The molecular weights of the resulting polymers were precisely controlled by the initial feed ratio of the porphyrin monomer to the initiator. The UV–VIS spectra suggested that the porphyrin pendants are regularly arranged to form stacked columns. Metallo‐porphyrin polymers were also prepared by reacting free‐base porphyrin polymers with metal salts. The successive reactions of free‐base and zinc‐porphyrin monomers resulted in the formation of diblock polymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 585–595, 2006     

Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.     

Preparation and characterization of silica—polyimide composite membranes coated on porous tubes for CO2 separation

Silica-polyimide microcomposite membranes were prepared on γ-alumina-coated α-alumina support tubes, and their gas permeation properties were evaluated with He, N₂ and CO₂. Smoothing of the substrate surface and hybridization of silica and polyamic acid were both effective to form defect-free thin composite membranes. The CO₂ permeance of a membrane with a silica content of 68 wt% was one order of magnitude higher than that of a polyimide membrane having the same thickness. The permselectivity of CO₂ to N₂ was 30 at 30°C and 13 at 100°C. Contributions of the silica and polyimide phases to permeance of the composite membrane were analyzed with a two-phase permeation model. The effective thickness of the rate-controlling polyimide phase was less than one-tenth of the total thickness of the silica-polyimide membrane.     

Structurally Controlled Porphyrin-Aggregation Process in Phospholipid Membranes

Abstract— Structurally controlled aggregation course for five porphyrins (etioporphyrin [EP], 5-mono- and 5,15-di-[ p -tol-yl]etioporphyrin [TP and DTP], 5,10,15,20-tetrakis[ p -tol-y1]porphin [TTP], and 5,10,15,20-tetrakis[3,5-di- tert -bu-tylphenyl]porphin [TBP]) in dipalmitoyl-phosphatidyl-choline liposomes has been monitored by fluorescence and absorption spectroscopy. While TBP shows no tendency to aggregate in liposomes, EP, TP, DTP and TTP form a porphyrin-enriched domain in membrane interior with time. The further aggregation steps within porphyrin clusters resulting in formation of stacked porphyrin aggregates have been observed for EP, TP and DTP.     

Designer ribozymes: programming the tRNA specificity into flexizyme

Fx3 is an artificial ribozyme with the ability to aminoacylate various tRNAs with phenylalanine and its nonnatural derivatives. Herein we report a simple strategy to build tRNA specificity into the generic Fx3, by appending to its 3'-end a tRNA-specific sequence (TSS), which is complementary to the acceptor stem of the cognate tRNA. This new designer ribozyme, referred to as Fx10, is able to recognize its cognate tRNA via a 10-base-pair interaction that is formed after the invasion of the tRNA acceptor stem by the TSS. We have demonstrated that Fx10 can aminoacylate its cognate tRNA with a high degree of specificity and also discriminate against the noncognate tRNAs. Because the tRNA specificity can be easily programmed into Fx10, it is a custom-made catalyst to generate nonnatural aminoacyl-tRNAs.     

Interactions of water-soluble polymers with small molecules II: Poly(2-diethylaminoethyl methacrylate)-methyl orange and its homolog systems at different temperatures

In order to investigate the interactions of poly(2-diethylaminoethyl methacrylate) (PDEAEMA) with methyl orange and its homologs in solution, temperature dependence of the complex formation has been examined in detail by the measurements of transmittance and specific conductance for the systems. Furthermore, the binding course of dyes to PDEAEMA has been studied on the basis of thermodynamic parameters obtained from equilibrium dialysis experiments at different temperatures. It was observed that the flocculation process shifted to lower dye concentrations in accordance with increasing hydrophobicity of the dyes in the order, methyl orange < ethyl orange < butyl orange, and the process of complex formation was characterized by three separate regions according to the slope of specific conductivity-mixing ratio curve for mixtures of PDEAEMA and dye. The temperature dependences of F,H and S suggest that, for dyes-PDEAEMA complex formation, the hydrophobic interaction is predominant at a low temperature but the electrostatic interaction becomes important as the temperature increases.