A novel synthesis of 1,2,4-oxadiazoles and isoxazoles

A novel synthesis of 1,2,4-oxadiazoles and isoxazoles is described by utilizing the reactions between amidoximes and α,β-alkynic aldehydes and/or ketones. Conjugate addition products, obtained from amidoximes and α,β-alkynic aldehydes and/or ketones, afford 1,2,4-oxadiazoles and isoxazoles when treated with bases and acids, respectively. 1,2,4-Oxadiazoles can also be synthesized directly from amidoximes and α,β-alkynic aldehydes in a one-pot manner under basic conditions. The reactions are general for a variety of starting compounds and tolerate the presence of aryl, heteroaryl and alkyl groups.     

Dendrimer Templated Synthesis of Carbon Nanotube Supported PdAu Catalyst and its Application as Hydrogen Peroxide Sensor

At present, CNT supported catalysts were prepared by two different methods as NaBH₄ reduction and dendrimer templated NaBH₄ reduction method to observe the effect of preparation method on the sensitivity and activity of H₂O₂ reduction. Then, CNT supported Pd_xAu_y bimetallic nanocatalysts having various atomic ratio were synthesized via novel dendrimer templated NaBH₄ reduction method. The resulting materials were characterized employing XRD and TEM. Crystallite size of 10 %Pd_0.7Au_0.3/CNT_dendrimer was obtained from XRD 17.1 nm and mean particle size obtained from TEM is about 15 nm. Moreover, the electrochemical behavior of these catalysts was characterized by cyclic voltammetry (CV) and chronoamperometry (CA) techniques. Pd_xAu_y bimetallic nanocatalysts have excellent electrocatalytic properties and great potential for applications in electrochemical detection. The sensitivity and the limit of detection values for the prepared sensor with monometallic 10 % Pd/CNT_dendrimer catalysts are 219.78 μA mM^?1cm^?2 and 2.6 μM, respectively. However, the sensor constructed with 10 %Pd_0.7Au_0.3/CNT_dendrimer modified electrode has a very high sensitivity of 316.89 μA mM^?1 cm^?2 with a quick response time of 2 s and a wide linear range of 0.001–19.0 mM. In addition, the interference experiment indicated that the 10 % Pd_0.7Au_0.3/CNT_dendrimer nanoparticles have good selectivity toward H₂O₂.     

Synthesis of pyrazoles via electrophilic cyclization

Electrophilic cyclizations of α,β-alkynic hydrazones by molecular iodine were investigated for the synthesis of 4-iodopyrazoles. α,β-Alkynic hydrazones were readily prepared by the reactions of hydrazines with propargyl aldehydes and ketones. When treated with molecular iodine in the presence of sodium bicarbonate, α,β-alkynic hydrazones underwent electrophilic cyclization to afford 4-iodopyrazoles in good to high yields. Iodocyclization was general for a wide range of α,β-alkynic hydrazones and tolerated the presence of aliphatic, aromatic, heteroaromatic, and ferrocenyl moieties with electron-withdrawing and electron-donating substituents.     

Efficient one-pot synthesis of cyanoferrocene from ferrocenecarboxaldehyde using NH2OH · HCl/KI/ZnO/CH3CN system

A new and efficient one-pot synthesis of cyanoferrocene from ferrocenecarboxaldehyde is described by employing the NH₂OH · HCl/KI/ZnO/CH₃CN system.     

Synthesis of dihydrobenzisoxazoles by the [3 + 2] cycloaddition of arynes and oxaziridines

Dihydrobenzisoxazoles are readily prepared in good yields by the [3 + 2] cycloaddition of oxaziridines and arynes. The reaction involves an unusual cleavage of the C-O bond of the oxaziridine and tolerates a variety of substituents on the oxaziridine and the o-(trimethylsilyl)aryl triflate to form aryl-, heteroaryl-, alkyl-, and naphthyl-substituted dihydrobenzisoxazoles. The resulting halogen-substituted dihydrobenzisoxazoles are readily elaborated to more complex products using palladium-catalyzed crossing-coupling processes.     

Synthesis of Ferrocene Based Naphthoquinones and its Application as Novel Non‐enzymatic Hydrogen Peroxide

At present, a highly sensitive hydrogen peroxide (H₂O₂) sensor is fabricated by ferrocene based naphthaquinone derivatives as 2,3‐Diferrocenyl‐1,4‐naphthoquinone and 2‐bromo‐3‐ferrocenyl‐1,4‐naphthoquinone. These ferrocene based naphthaquinone derivatives are characterized by H‐NMR and C‐NMR. The electrochemical properties of these ferrocene based naphthaquinone are investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) on modified glassy carbon electrode (GCE). The modified electrode with ferrocene based naphthaquinone derivatives exhibits an improved voltammetric response to the H₂O₂ redox reaction. 2‐bromo‐3‐ferrocenyl‐1,4‐naphthoquinone show excellent non‐enzymatic sensing ability towards H₂O₂ response with a detection limitation of 2.7 μmol/L a wide detection range from 10 μM to 400 μM in H₂O₂ detection. The sensor also exhibits short response time (1 s) and good sensitivity of 71.4 μA mM^?1 cm^?2 and stability. Furthermore, the DPV method exhibited very high sensitivity (18999 μA mM^?1 cm^?2) and low detection limit (0.66 μM) compared to the CA method. Ferrocene based naphthaquinone derivative based sensors have a lower cost and high stability. Thus, this novel non‐enzyme sensor has potential application in H₂O₂ detection.     

Synthesis of pyrazoles via CuI-mediated electrophilic cyclizations of α,β-alkynic hydrazones

Synthesis of pyrazoles via electrophilic cyclization of α,β-alkynic hydrazones by copper(I) iodide is described. When treated with copper(I) iodide in the presence of triethylamine in refluxing acetonitrile, α,β-alkynic hydrazones, prepared readily from hydrazines and propargyl aldehydes and ketones, undergo electrophilic cyclization to afford pyrazole derivatives in good to excellent yields. The reaction appears to be general for a variety of α,β-alkynic hydrazones and tolerates the presence of aliphatic, aromatic, and ferrocenyl moieties with electron-withdrawing and electron-donating substituents.     

Development of Nonenzymatic Benzoic Acid Detection on PdSn/GCE/Vulcan XC‐72R Prepared via Polyol Method

In this study a PdSn based sensor was developed for the determination of benzoic acid (BA) in foods. A carbon (Vulcan XC‐72R) supported PdSn catalyst was prepared via polyol method and its surface electronic and chemical properties were investigated by advanced surface analytical techniques such as scanning electron microscopy (SEM), X‐ray diffraction spectroscopy (XRD), X‐ray Photoelectron Spectroscopy (XPS), temperature‐programmed reduction with H₂ (TPR‐H₂) and transmission electron microscopy (TEM). Electrochemical measurements were performed by employing cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques on PdSn/GCE/Vulcan XC‐72R electrode. The developed sensor showed a wide linear range up to 10 mM with a 0.77 μM low limit of detection (LOD) as well as high stability. Further experiments were performed on food samples containing BA to achieve real sample measurements. For real sample measurements, PdSn/GCE/Vulcan XC‐72R electrode was used for the determination of BA in different kinds of samples such as mayonnaise, ketchup and carbonated beverages.     

Synthesis of tetracyanoethylene‐substituted ferrocene and its device properties

Small organic molecules are promising candidates for cheaper, flexible and good‐performance sources for organic solar cells (OSCs) due to their easy fabrication, low cost and slightly cheaper processing. However, the lower power conversion efficiency of OSCs is the main problem for their applications. Ferrocene structures could be the best candidates for the active layers of OSCs due to their unique properties such as thermal and chemical stability. The electrochemical, electro‐optical and solar cell performances of 2,5‐dicyano‐3‐ferrocenyl‐4‐ferrocenylethynylhexa‐2,4‐dienedinitrile (DiCN‐Fc) structures were investigated. First, the electrochemical and electro‐optical properties were examined for finding the highest occupied and lowest unoccupied molecular orbital values and bandgap of DiCN‐Fc. The best photovoltaic performance was obtained with 7 wt% of DiCN‐Fc loading, with a power conversion efficiency of about 4.27%. In the light of our investigations, ferrocenyl‐substituted small organic molecules could contribute to the development of organic photovoltaic devices.     

Synthesis of Novel Benzothiophene Derivatives via Cyclization Reactions

Russian Journal of Organic Chemistry - The Sonogashira cross coupling reaction of 2-bromo-5-(4-methoxyphenyl)thiophene and 1-ethynyl-2-(methylsulfanyl)benzene gave...