Teaching nuclear and radiochemistry at undergraduate colleges

A large fraction of the potential graduate students in chemistry come from undergraduate colleges. The exposure of these students to the field of nuclear and radiochemistry is limited by the fact that few professionals actively involved in the field teach at these schools. There is also increasing competition for the limited number of chemistry students by other chemical specializations. Innovative approaches such as a short course to introduce students to nuclear and radiochemistry and some of the needs for undergraduate teaching are discussed.     

Characterization of partially transesterified poly(beta-hydroxyalkanoate)s using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) was used for the characterization of a partially transesterified poly(beta-hydroxyalkanoate), PHA, polymer produced by the bacterial strain Alcaligenes eutrophus using saponified vegetable oils as the sole carbon sources. The transesterification was carried out separately under acidic and basic conditions to obtain PHA oligomers weighing less than 10 kDa. The intact oligomers were detected in their cationized [M + Na](+) and [M + K](+) forms by MALDI-TOFMS. A composition analysis, using the MALDI-TOF spectra, indicate that the oligomers obtained via acid catalysis were terminated with a methyl 3-hydroxybutyrate end group, and those obtained by base catalysis had a methyl crotonate (olefinic) termination. In addition to HB (hydroxy butyrate), the oligomers were found to contain a small percentage of HV (hydroxy valerate). This was independently confirmed using gas chromatography/mass spectrometry (GC/MS). In comparison, the analysis of a commercial PHA polymer, transesterified under identical conditions, only showed the presence of HB, i.e. a pure PHB homopolymer. Copyright 1999 John Wiley & Sons, Ltd.     

Standardization for oxygen isotope ratio measurement - still an unsolved problem

Numerous organic and inorganic laboratory standards were gathered from nine European and North American laboratories and were analyzed for their delta(18)O values with a new on-line high temperature pyrolysis system that was calibrated using Vienna standard mean ocean water (VSMOW) and standard light Antartic precipitation (SLAP) internationally distributed reference water samples. Especially for organic materials, discrepancies between reported and measured values were high, ranging up to 2 per thousand. The reasons for these discrepancies are discussed and the need for an exact and reliable calibration of existing reference materials, as well as for the establishment of additional organic and inorganic reference materials is stressed. Copyright 1999 John Wiley & Sons, Ltd.     

Molecular distribution of some commercial nonylphenol ethoxylates using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Nonylphenol ethoxylates (NPEs) belong to a group of nonionic surfactants that are collectively referred to as alkylphenol ethoxylates (APEs). APEs find widespread use in heavy-duty commercial and household cleaning formulations, shampoos, and industrial processing, i.e. textile manufacture. Their environmental impact depends on the molecular distribution and the extent of their biodegradation in municipal sewage systems, waterways and rivers. We have established two sample preparation methods that have enabled the determination of the molecular distributions of six commercial nonylphenol ethoxylates using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry (MS). In both methods, alpha-cyano-4-hydroxycinnamic acid, dissolved in acetonitrile/tetrahydrofuran, was used as the matrix. In one set of experiments, the NPEs were dissolved in an acetonitrile/tetrahydrofuran solvent system prior to mixing with the matrix solution, and the resulting MALDI-TOF mass spectra produced mostly sodiated molecules [M + Na](+). The NPEs, all having the formula 4-(C(9)H(19))-C(6)H(4)-(OCH(2)CH(2))(n)-OH, are Surfonic (R)N-95, N-100, N-102, N-120, N-150 and N-300. Surfonic N-95 and N-100 gave n values of 5-20; Surfonic N-102, N-120, N-150, and N-300 gave n values of 5-21, 5-22, 8-25 and 15-40, respectively. In order to develop a sample preparation method that could be used with less polar NPEs, we dissolved the NPEs (except N-300) in pentane prior to mixing with the matrix solution, and found that the MALDI spectral quality was unaffected by the solvent systems. Copyright 1999 John Wiley & Sons, Ltd.     

The Department of Energy/American Chemical Society Summer School in Nuclear and Radiochemistry at San Jos&;#233; State University

Summary In this paper, the use of a combined X-ray and neutron source for security inspections based on Inertial Electrostatic Confinement (IEC) fusion is discussed. Current inspection systems typically use X-ray techniques, but thermal neutron analysis (TNA) and fast neutron analysis (FNA), allow expanded detection of certain types of explosives. The integrated unit proposed here uses three separate IEC sources producing 14 and 2.45 MeV neutrons plus soft X-rays. This combination allows multiple detection methods with the composite signal analysis being done by a fuzzy logic system, significantly reducing false signals.     

Radiochemical analyses for the defense waste processing facility startup at the Savannah River Site

Highly radioactive waste from defense-related activities at the Savannah River Site in South Carolina are to be incorporated into a borosilicate glass in the Defense Waste Processing Facility (DWPF) for long-tem geological isolation. Processing and repository safety considerations require the determination of 24 radioisotopes that meet the reporting criteria. These isotopes include fission products, activation products, and daughter nuclei that grow into the waste. Four isotopes,¹³⁷Cs,⁹⁰Sr,²³⁸Pu and²³⁸U will be routinely measured in the DWPF operation for process control. This work shows that the concentrations of the other 20 reportable radioisotopes in the final glass product can be predicted from a thorough characterization of the high level waste (HLW) tanks and a knowledge of the concentrations of the major non-radioactive components in the vitrification process.     

Chemical sensing and imaging with metallic nanorods

In this Feature Article, we examine recent advances in chemical analyte detection and optical imaging applications using gold and silver nanoparticles, with a primary focus on our own work. Noble metal nanoparticles have exciting physical and chemical properties that are entirely different from the bulk. For chemical sensing and imaging, the optical properties of metallic nanoparticles provide a wide range of opportunities, all of which ultimately arise from the collective oscillations of conduction band electrons ("plasmons") in response to external electromagnetic radiation. Nanorods have multiple plasmon bands compared to nanospheres. We identify four optical sensing and imaging modalities for metallic nanoparticles: (1) aggregation-dependent shifts in plasmon frequency; (2) local refractive index-dependent shifts in plasmon frequency; (3) inelastic (surface-enhanced Raman) light scattering; and (4) elastic (Rayleigh) light scattering. The surface chemistry of the nanoparticles must be tunable to create chemical specificity, and is a key requirement for successful sensing and imaging platforms.     

On-line delta(18)O measurement of organic and inorganic substances

A method for the automated sample conversion and on-line oxygen isotope ratio (delta(18)O) determination for organic and inorganic substances is presented. The samples are pyrolytically decomposed at 1400 degrees C in the presence of nickelized graphite. With the system presented organic as well as inorganic samples such as nitrates, sulphates and phosphates of 50-100 &mgr;g O can be analyzed for their delta(18)O values with a standard deviation usually better than 0.5 per thousand. Additionally, carbon isotope ratios of organic substances and nitrogen isotope ratios of inorganic nitrogenous compounds are available in the same sample run. Data for international and some inter-laboratory reference materials are presented to show the accuracy and reliability of the method. The effect of some additives on the CO yield was checked for substances which do not pyrolyze completely. Copyright 1999 John Wiley & Sons, Ltd.     

Determination of long-lived fission products and actinides in Savannah River Site HLW sludge and glass for waste acceptance

Savannah River Site (SRS) is immobilizing the radioactive, high-level waste sludge in Tank 51 into a borosilicate glass for disposal in a geologic repository. A requirement for repository aceeptance is that SRS report the concentrations of certain fission product and actinide radionuclides in the glass. This paper presents measurements of many of these concentrations in both Tank 51 sludge and the final glass. The radionuclides were measured by inductively coupled plasma mass spectrometry and α, β, and γ counting methods. Examples of the radionuclides are⁹⁰Sr,¹³⁷Cs,²³⁸U and,²³⁹Pu. Concentrations in the glass are 3.1 times lower due to dilution of the sludge with a nonradio-active glass forming frit in the vitrification process. Results also indicated that in both the sludge and glass the relative concentrations of the long lived fission products insoluble in caustic are in proportion to their yields from the fission of²³⁵U waste in the SRS reactors. This allowed the calculation of a fission yield scaling factor. This factor in addition to the sludge dilution factor can be used to estimate concentrations of waste acceptance radionuclides that cannot be measured in the glass. Examples of these radionuclides are⁷⁹Se,⁹³Zr, and¹⁰⁷Pd.