Separation and analysis of triazine herbcide residues by capillary electrophoresis

Triazines are widely used in agriculture around the world as selective pre‐ and post‐emergence herbicides for the control of broad leaf and grassy weeds. With high toxicity and persistence, triazines can contaminate the environment and crops, so the development of rapid and sensitive methods for the determination of different triazines is necessary. Capillary electrophoresis comprises a group of techniques used to separate chemical mixtures. Analytical separation is based on different electrophoretic mobilities. This review focuses on the analysis of triazine herbicides with different modes of capillary electrophoresis, including capillary zone electrophoresis, micellar electrokinetic capillary electrophoresis, capillary electrochromatography and nonaqueous capillary electrophoresis. Determinations of triazines in various matrices such as surface water, groundwater, vegetables, soil and grains are emphasized. Copyright © 2014 John Wiley & Sons, Ltd.     

Statistical properties of the nonlinear negative binomial state

In this context, we introduce and investigate the properties of the nonlinear negative binomial state (the state which interpolates between the nonlinear coherent and the number states). Mainly we concentrate on the statistical properties for such state where we have discussed two different cases of squeezing phenomenon. The first case is the normal squeezing while the second is the amplitude squared squeezing, further the second order correlation function is also considered. Our discussion have been extended to include the quasi-probability distribution functions (W-Wigner and Q-functions). The quadrature distribution and the phase properties in Pegg-Barnett formalism besides the phase variances are considered. Examination of the resonance fluorescence against the present state is given (single atom and thermodynamic limit). It has been shown that the atomic inversion is sensitive to any variation in the nonlinear negative binomial number m.     

Integrable non-linear σ models with fermions

The two-dimensional non-linear model on a Riemannian symmetric spaceM=G/H is coupled to fermions with quartic self-interactions. The resulting hybrid model is presented in a gauge-dependent formulation, with a bosonic field taking values inG and a fermionic field transforming under a given representation of the gauge groupH. General criteria for classical integrability are presented: they essentially fix the Lagrangian of the model but leave the fermion representation completely arbitrary. It is shown that by a special choice for the fermion representation (derived from the adjoint representation ofG by an appropriate reduction) one arrives naturally at the supersymmetric non-linear model onM=G/H. The issue of quantum integrability is also discussed, though with less stringent results.Work partially supported by CNPq (Conselho Nacional de Desenvolvimento Científico e Tecnológico), Brazil, and KFA Jülich, Federal Republic of GermanyOn leave of absence from Fakultät für Physik der Universität Freiburg, Federal Republic of Germany     

Stability-indicating high-performance liquid chromatographic assay of buspirone HCl

The United States Pharmacopoeia high-performance liquid chromatographic (HPLC) assay method of buspirone is not able to discriminate buspirone from its degradation products. The purpose of this work is to develop a sensitive, selective, and validated stability-indicating HPLC assay for the analysis of a buspirone hydrochloride in a bulk drug. Buspirone HCI and its potential impurities and degradation products are analyzed on an Ultrasphere C18 column heated to 40 degrees C using a gradient program that contains monobasic potassium phosphate buffer solution (pH 6.9) and acetonitrile-methanol mixture (13:17) of 35% for 5 minutes, then increased to 54% in 5.5 minutes. The samples are monitored using a photo-diode array detector and integrated at 244 and 210 nm. The stress testing of buspirone HCI shows that buspirone acid hydrochloride is the major degradation product. The developed method shows a separation of buspirone degradation product and its potential impurities in one run. The stability of buspirone HCI is studied under accelerated conditions in order to provide a rapid indication of differences that might result from a change in the manufacturing process or source of the sample. The forced degradation conditions include the effect of heat, moisture, light, acid-base hydrolysis, sonication, and oxidation. The compatibility of buspirone HCI with some pharmaceutical excipients is studied under stress conditions. The linear range of buspirone HCI is between 5 and 200 ng/microL with a limit of quantitation of 2.5 ng/microL. The intraassay percentage deviation is not more than 0.38%, and the day-to-day variation was not more than 0.80%. The selectivity, repeatability, linearity, range, accuracy, sample solution stability, ruggedness, and robustness show acceptable values.     

Spectrophotometric determination of nickel(II) in different samples by complexation with some triazolylazo dyes

A new sensitive spectrophotometric method for the determination of nickel(II) with 3-(2-hydroxy-5-acetyl-(L¹),-5-ethoxycarbonyl-(L²),-5-methyl-(L³),-5-formyl-(L⁴),-5-bromophen-1-ylazo)-1,2,4-triazole (L⁵), and 3-(2,4-dihydroxyphen-1-ylazo)-1,2,4-triazole (L⁶) in aqueous media containing 40 vol. % methanol has been developed. The method is based on the formation of stable coloured Ni(II) complexes with stoichiometric ratios 1: 1 and 1: 2 (n(M): n(L)). Linear calibration graphs are obtained up to 7.04 μg cm⁻³ of nickel(II) under optimum conditions attained from investigation of complex formation. The absorption maxima varied from 485 nm to 545 nm and the molar absorptivities ranged from 0.84 × 10⁴ to 4.65 × 10⁴ dm³ mol⁻¹ cm⁻¹ for 1: 1 and 1: 2 (n(M): n(L)) complexes with varying the substituent on the phenolic ring. The optimum ranges for the direct determination of nickel(II) (Ringbom) and the stability constants of the formed complexes are determined. The developed method was applied to the spectrophotometric determination of nickel(II) in some samples with satisfactory results.     

Extraction of tungsten and rhenium by basic or neutral extractants in xylene from mineral acidic media

Extraction of WO ₄ ^2– and ReO ₄ ^– by Adogen-381, tricaprylmethylammonium chloride, Hyamine 10-X, trioctylphosphine oxide or dibenzylsulphoxide in xylene from HNO₃, HCl or H₂SO₄ acid medium was investigated. Based on the separation factors obtained, the separation of ReO ₄ ^– from WO ₄ ^2– was elucidated. ReO ₄ ^– was separated from WO ₄ ^2– in high radiochemical purity: >99.9% by three successive extractions and strippings using Adogen-381 from HCl or HNO₃ acid medium.     

Synthesis of 8-cyano-1,4-dihydro-4-oxopyrrolo[1,2-a]pyrimidine-3-carboxylic acids as potential antimicrobial agents

The preparation of a variety of 8-cyano-1,4-dihydro-7-phenyl-4-oxopyrrolo[1,2-a]pyrimidine-3-carboxylicacids and 8-cyano-1,4-dihydro-7-p-fluorophenyl-4-oxopyrrolo[1,2-a]pyrimidine-3-carboxylic acids is described.     

Effect of sodium oxide doping on solid-solid interactions between V2O5 AND Al2O3

A V₂O₅/Al₂O₃ mixed solids sample was prepared with a molar ratio of 0.41 Na₂O (4 and 10 mol%) was added in the form of sodium nitrate prior to calcination in air in the temperature range 500–1000C. Solid-solid interactions between V₂O₅ and Al₂O₃ were studied using DTA and TG curves and their derivatives together with XRD techniques.The results obtained showed that Na₂O interacted with V₂O₅ at temperatures starting from 500C to yield a sodium/vanadium compound, Na_0.3V₂O₅ which remained stable and decomposed in part by heating at 1000C. V₂O₅ exists in orthorhombic and monoclinic forms in the case of pure mixed solids and those containing 4 mol% of Na₂O and preheated at 500C, and in monoclinic form in the case of the mixed solid doped with 10 mol% of Na₂O.Heating of pure and doped mixed oxide solids at 650C resulted in the conversion of most of the V₂O₅ into AlVO₄. Doping with sodium oxide enhanced the solid-solid interaction between V₂O₅ and Al₂O₃ at 650C to produce AlVO₄. The produced AlVO₄ decomposed completely on heating at 700C to form -Al₂O₃ and V₂O₅, (orthorhombic and monoclinic forms).The presence of Na₂O was found to decrease the relative intensity of the diffraction lines of -Al₂O₃ (corundum) produced at 750C which indicated some kind of hindrance of the crystallization process.Heating of pure and doped mixed solids at 1000C resulted in a further crystallization of acorundum together with V₂O₅ and sodium vanadate, Na_0.3V₂O₅. However, the intensities of diffraction lines relative to those of the sodium vanadium compound were found to decrease markedly by heating at 1000C, indicating partial thermal decomposition into vanadium and aluminium oxides.