Thermal analysis of pharmaceutical compounds

Some sulphonamides are evaluated by means of thermal analysis. Use is made of their characteristic endothermic DTA peaks (melting peaks), where the area changes linearly with variations in the amount of sulphonamides. The method is suitable for the determination of 30–100 mg of sulphathiazole, sulphisomidine, sulphaguanidine, sulphacetamide sodium and sulphamethoxypyridazine with reasonable accuracy. As for sulphisoxazole, two peaks are used for its determination: an endothermic one to determine 30–100 mg, and an exothermic one to determine 6–30 mg.

---

Zusammenfassung Einige Sulphonamide wurden durch thermische Analyse bestimmt, wobei von der linearen Abhängigkeit der Fläche der charakteristischen endothermen DTA-Peaks (Schmelzpeaks) von der Menge der Sulphonamide Gebrauch gemacht wurde. Mit der Methode können 30–100 mg Sulphathiazol, Sulphisoimidin, Sulphaguanidin, Natrium-Sulphacetamid und Sulphamethoxypyridazin mit ausreichender Genauigkeit bestimmt werden. Bei der Bestimmung von Sulphisooxazol wurde ein endothermer Peak für Mengen von 30–100 mg und ein exothermer für geringere Mengen von 6–30 mg herangezogen.

---

. - ( ), . 30–100 , , , . , — 30 100 , — 6 30 .

     

Alkylation of 2‐pyridinones: Synthesis of novel acyclonucleosides

This paper presents the synthesis of some novel acyclonucleosides containing 2‐pyridinones and 2‐hydroxyethoxymethyl, 2,3‐dihydroxy‐propyl side chain. The tosylate of these nucleosides analogues could be modified to azido derivatives. Also, acyclonucleosides with 1‐ethoxymethyl, 1‐benzyloxymethyl, 1‐methylthiomethy 1 and 2‐hydroxyethyl side chains have been investigated. The O‐alkylated pyridine derivatives were obtained during most reactions.     

Synthesis of 1,2,4-Triazol-3-ylmethyl-, 1,3,4-Oxa-, and -Thiadiazol-2-ylmethyl-1H-[1,2,3]-triazolo[4,5-d]pyrimidinediones

1-Carbethoxymethyl-4,6-dimethyl-1H-[1,2,3]triazolo[4,5-d]pyrimidine-5,7(4H,6H)-dione was synthesized and treated with hydrazine hydrate to give the corresponding hydrazide. The latter hydrazide was treated either with phenylisothiocyanate or with carbon disulfide/alc. KOH to afford the corresponding thiosemicarbazide and oxadiazole derivatives. Alkylation of 2-mercapto-1,3,4-oxadiazole with dimethyl sulfate or ethyl chloroacetate gave the corresponding 2-methylthio-, and 2-ethylthioglycolate derivatives. Formation of 1,3,4-thiadiazole, 5-mercapto-1,2,4-triazole, and 1,3,4-oxadiazole were carried out by treating of the latter thiosemicarbazide with conc. H₂SO₄, NaOH/HCl, and HgO. Treating of 5-mercapto-1,2,4-triazole with ethyl chloroacetate afforded the thioglycolate ester. Hydrolysis of the latter with hydrazine hydrate afforded the hydrazide derivatives. Condensation of these hydrazides with monosaccharide aldoses gave the corresponding sugar hydrazones. The novel compounds were tested for antiviral activity against hepatitis B virus and showed moderate activities.     

Identification of some sweetening agents by thermal analysis

The thermal behaviours of some artificial sweetening agents — sodium cyclamate, saccharine and sorbitol — were studied by means of a complex thermal method. The quite different thermal behaviours of the different sweeteners are utilized for their identification. An endothermic peak is seen in the DTA curve at about 386° and 94° for saccharine and sorbitol, respectively, which is not accompanied by a weight loss. In the case of sodium cyclamate a characteristic exothermic peak followed by an endothermic one is detected. A semiquantitative method for the determination of sodium cyclamate is described.     

Use of alpha spectrometry for analysis of U-isotopes in some granite samples

The present study aims to use the ??-spectrometry, at NMA. A radiochemical technique [1, 2] for analysis of U-isotopes was carried out for some granite samples from Gabal Gattar and El Missikat localities and also for some reference soil samples of IAEA. Several steps of sample preparation, radiochemical separation, and source preparation were performed before analysis. The concerned sample was leached by HNO₃, HF and H₂O₂ acids after ashing. The ashed sample was spiked with uranium tracer (²³²U) for chemical yield and activity calculation. Then uranium was extracted from the matrix elements with trioctylphosphine oxide (TOPO) and stripped with 1 M NH₄F/0.1 M HCl solution. The uranium fraction was purified by co-precipitation with LaF₃ to ensure complete removal of thorium and traces of resolution degrading elements. This was followed by a final clean-up step using an anion exchange. The pure uranium fraction was electrodeposited on a stainless steel disc from HCl/oxalate solution. The obtained results from the soil reference samples indicate general similarities between the techniques of ??-spectrometers of NMA, EAEA and IAEA for analysis of U-isotopes. The U-isotopes in the granite samples of high radioactivity levels need more attempts after dilution process to be in the limit detection of ??-spectrometry.     

Electrospun Nanofibers from a Tricyanofuran‐Based Molecular Switch for Colorimetric Recognition of Ammonia Gas

A chromophore based on tricyanofuran (TCF) with a hydrazone (H) recognition moiety was developed. Its molecular‐switching performance is reversible and has differential sensitivity towards aqueous ammonia at comparable concentrations. Nanofibers were fabricated from the TCF–H chromophore by electrospinning. The film fabricated from these nanofibers functions as a solid‐state optical chemosensor for probing ammonia vapor. Recognition of ammonia vapor occurs by proton transfer from the hydrazone fragment of the chromophore to the ammonia nitrogen atom and is facilitated by the strongly electron withdrawing TCF fragment. The TCF–H chromophore was added to a solution of poly(acrylic acid), which was electrospun to obtain a nanofibrous sensor device. The morphology of the nanofibrous sensor was determined by SEM, which showed that nanofibers with a diameter range of 200–450 nm formed a nonwoven mat. The resultant nanofibrous sensor showed very good sensitivity in ammonia‐vapor detection. Furthermore, very good reversibility and short response time were also observed.     

Microwave‐Assisted Synthesis of Arylazoaminopyrazoles as Disperse Dyes for Textile Printing

The synthesis of heterocyclic azo‐dyes via conventional heating and microwave (MW) heating was investigated. From a sequence of reactions starting from cyanoacetic acid, 4‐arylazo‐2H‐pyrazol‐3‐ylamines and 4‐arylazo‐2‐phenyl‐2H‐pyrazol‐3‐ylamines were obtained. The structures these compounds were obtained by inspection of spectroscopic and analytical techniques including ¹H and ¹³C NMR spectroscopy, IR spectroscopy, mass spectrometry, and elemental analysis. The fastness properties and UV/Vis absorption spectroscopic data of these disperse dyes in printing polyester fabrics were investigated.