盐酸伊达比星杂质A的合成工艺优化及其高效液相分析

通过对盐酸伊达比星脱羟基杂质A的合成研究，为盐酸伊达比星的质控标准提供参考。以盐酸伊达比星为起始原料，经过4步反应得到脱羟基杂质A。本文提供了盐酸伊达比星杂质A的制备方法以及高效液相色谱分析方法，为杂质含量控制提供了依据。该工艺可以稳定、快速制备高纯度脱羟基杂质A，制备总收率为57.20%，纯度为57.20%，其结构经¹H NMR， ¹³C NMR和MS(ESI)表征。     

Designing spirobifullerene core based three-dimensional cross shape acceptor materials with promising photovoltaic properties for high-efficiency organic solar cells

The development of organic electron acceptor materials is one of the key factors for realizing high-performance organic solar cells (OSCs). Nonfullerene electron acceptors, compared to traditional fullerene acceptor materials, have gained much impetus owing to their better optoelectronic tunabilities and lower cost, as well as higher stability. Therefore, 5 three-dimensional (3D) cross-shaped acceptor materials having a spirobifullerene core flanked with 2,1,3-benzothiadiazole are designed from a recently synthesized highly efficient acceptor molecule SF(BR) ₄ and are investigated in detail with regard to their use as acceptor molecules in OSCs. The density functional theory (DFT) and time-dependent DFT (TDDFT) calculations have been performed for the estimation of frontier molecular orbital (FMO) analysis, density of states analysis, reorganization energies of electron and hole, dipole moment, open-circuit voltage, photo-physical characteristics, and transition density matrix analysis. In addition, the structure-property relationship is studied, and the influence of end-capped acceptor modifications on photovoltaic, photo-physical, and electronic properties of newly selected molecules ( H1-H5 ) is calculated and compared with reference ( R ) acceptor molecule SF(BR) ₄ . The structural tailoring at terminals was found to effectively tune the FMO band gap, energy levels, absorption spectra, open-circuit voltage, reorganization energy, and binding energy value in selected molecules H1 to H5 . The 3D cross-shaped molecules H1 to H5 suppress the intermolecular aggregation in PTB7-Th blend, which leads to high efficiency of acceptor material H1 to H5 in OSCs. Consequently, better optoelectronic properties are achieved from designed molecules H1 to H5 . It is proposed that the conceptualized molecules are superior than highly efficient spirobifullerene core-based SF(BR) ₄ acceptor molecules and, thus, are recommended to experiments for future developments of highly efficient solar cells.     

流体静高压下的锂离子导电性

本文改进实验方法,在0.0001—1.23GPa流体静高压下测量了整片非晶锂离子导体B₂O₃-0.7Li₂O-0.7LiCl-xAl₂O₃(x=0.05;0.15)及其粉末压片的离子电导率及激活体积。发现粉末压片电导率峰值是由非晶微粒间的接触电导及非晶微粒体电导两者叠加;对整片非晶电导率的压力效应用离子迁移通道的物理图象给出初步的微观解释。此外,还观测到氧化铝组分减少使电导率的压力转变点明显降低;测量出不同温度热处理以及300℃等温热处理4—20h后离子电导率-压力曲线的变化规律,仍可归因于非晶态相分离及两种非晶相的先后晶化。 关键词：     

螺旋线径向挤压变形对其慢波结构冷测特性的影响

 介绍了用MAFIA软件的准周期边界条件计算螺旋线行波管慢波结构的色散和耦合阻抗，以及用ANSYS软件对螺旋线径向挤压变形建模的方法，并对螺旋线受挤压径向变形对其冷测特性的影响进行了详细的分析。结果表明:螺旋线径向挤压变形会导致相速增大，而在通常的变形范围内耦合阻抗也会增加；当变形继续增大时耦合阻抗上升到最大值后开始下降。     

防紫外线伞ATR-OMNI采样器的FTIR分析

本实验使用OMNI采样器，直接对伞面内外进行单反射ATR的分析，快速、简便、不破坏样品，得到分辨率很好的红外图谱，再配合红外谱库的谱图检索，可以分别得到匹配率95％以上的尼龙－6和聚酯型聚氨酯的分析结果。     

非晶态锂离子导体B2O3-0.7Li2O-0.7LiCl-xAl2O3-0.1V2O5的电学性质和电子自旋共振研究

对两种非晶态B₂O₃-0.7Li₂O-0.7LiCl-xAl₂O₃-0.1V₂O₅(x=0.05和0.15),用差热分析、电导率测量、X射线衍射和电子自旋共振进行研究,发现:1)V₂O₅不仅作非晶网络形成剂,而且改变了晶化过程;2)对B₂O₃-Li_{2关键词：}     

Infrared Spectroscopic Analysis of Chrysene and 1.2-Benzanthracence in Wax films

Chrysene and 1.2-benzanthracene are successfully doped in a solid wax film and their vibrational spectra in gooo--400cm^-1 are discussed. The harmonic frequencies and relative intensities of both the molecules observed in the film are compared with theoretical values calculated by the density functional theory （DFT） model as well as with the previous experimental data. The effects on spectra due to change of matrix and some additional bands observed in the wax film are also reported. Excellent agreement in the spectral positions and strengths between the experiments and DFT values are found.     

牛顿弦截法预估校正迭代格式的收敛阶

研究如下形式的牛顿弦截法的预估校正(P.C.)格式:P(预估):~xk+1=xk-(xk-xk-1)f(xk)f(xk)-f(xk-1)C(校正):xk+1=xk-(~xk+1-xk)f(xk)f~(xk+1)-f(xk)证明了它的收敛阶为2.618.