Experimental investigation on heat transfer behavior of the novel ternary eutectic PCM embedded with MWCNT for thermal energy storage systems

Journal of Thermal Analysis and Calorimetry - In this paper, the variation of thermophysical properties such as the thermal conductivity, thermal energy storage capacity, viscosity, and phase...     

Triphilic pentablock copolymers with perfluoroalkyl segment in central position

Adding perfluoroalkyl (PF) segments to amphiphilic copolymers yields triphilic copolymers with new application profiles. Usually, PF segments are attached as terminal blocks via Cu(I) catalyzed azide-alkyne cycloaddition (CuAAC). The purpose of the current study is to design new triphilic architectures with a PF segment in central position. The PF segment bearing bifunctional atom transfer radical polymerization (ATRP) initiator is employed for the fabrication of triphilic poly(propylene oxide)-b-poly(glycerol monomethacrylate)-b-PF-b-poly(glycerol monomethacrylate)-b-poly(propylene oxide) PPO-b-PGMA-b-PF-b-PGMA-b-PPO pentablock copolymers by a combined ATRP and CuAAC reaction approach. Differential scanning calorimetry indicates the PF-initiator to undergo a solid–solid phase transition at 63°C before the final crystal melting at 95°C. This is further corroborated by polarized optical microscopy and X-ray diffraction studies. The PF-initiator could successfully polymerize solketal methacrylate (SMA) under typical ATRP conditions producing well-defined Br-PSMA-b-PF-b-PSMA-Br triblock copolymers that are then converted into PPO-b-PSMA-b-PF-b-PSMA-b-PPO pentablock copolymer via CuAAC reaction. Subsequently, acid hydrolysis of the PSMA blocks afforded water soluble well-defined triphilic pentablock copolymers PPO-b-PGMA-b-PF-b-PGMA-b-PPO with fluorophilic central segment, hydrophilic middle blocks, and lipophilic outer blocks. The triphilic block copolymers could self-assemble, depending upon the preparatory protocol, into spherical and filament-like phase-separated nanostructures as revealed by transmission electron microscopy.     

Designing spirobifullerene core based three-dimensional cross shape acceptor materials with promising photovoltaic properties for high-efficiency organic solar cells

The development of organic electron acceptor materials is one of the key factors for realizing high-performance organic solar cells (OSCs). Nonfullerene electron acceptors, compared to traditional fullerene acceptor materials, have gained much impetus owing to their better optoelectronic tunabilities and lower cost, as well as higher stability. Therefore, 5 three-dimensional (3D) cross-shaped acceptor materials having a spirobifullerene core flanked with 2,1,3-benzothiadiazole are designed from a recently synthesized highly efficient acceptor molecule SF(BR) ₄ and are investigated in detail with regard to their use as acceptor molecules in OSCs. The density functional theory (DFT) and time-dependent DFT (TDDFT) calculations have been performed for the estimation of frontier molecular orbital (FMO) analysis, density of states analysis, reorganization energies of electron and hole, dipole moment, open-circuit voltage, photo-physical characteristics, and transition density matrix analysis. In addition, the structure-property relationship is studied, and the influence of end-capped acceptor modifications on photovoltaic, photo-physical, and electronic properties of newly selected molecules ( H1-H5 ) is calculated and compared with reference ( R ) acceptor molecule SF(BR) ₄ . The structural tailoring at terminals was found to effectively tune the FMO band gap, energy levels, absorption spectra, open-circuit voltage, reorganization energy, and binding energy value in selected molecules H1 to H5 . The 3D cross-shaped molecules H1 to H5 suppress the intermolecular aggregation in PTB7-Th blend, which leads to high efficiency of acceptor material H1 to H5 in OSCs. Consequently, better optoelectronic properties are achieved from designed molecules H1 to H5 . It is proposed that the conceptualized molecules are superior than highly efficient spirobifullerene core-based SF(BR) ₄ acceptor molecules and, thus, are recommended to experiments for future developments of highly efficient solar cells.     

Application of Hilbert＇s Projective Metric on Symmetric Cones

Let Ω be a symmetric cone. In this note, we introduce Hilbert＇s projective metric on Ω in terms of Jordan algebras and we apply it to prove that, given a linear invertible transformation g such that g（Ω） = Ω and a real number p, ｜p｜ 〉 1, there exists a unique element x ∈ Ω satisfying g（x） = x^p.     

Structure and morphology of laser-ablated WO3 thin films

The structure and surface morphology of WO₃ thin films deposited by a laser-ablation technique have been found to be strongly dependent on the deposition conditions and the nature of the substrate. By precisely controlling the substrate temperature and the oxygen partial pressure, amorphous, polycrystalline, nano-crystalline and iso-epitaxial WO₃ thin films were successfully grown. The structure and surface morphological features of the films from X-ray diffraction and atomic force microscopy data are described in relation to the deposition conditions. PACS 81.15.Fg; 68.55.-a; 68.37.Ps     

Accumulation of uranium by filamentous green algae under natural environmental conditions

The capacity of algae to concentrate uranium under natural environmental conditions is measured by a-spectrometry. Spirogyra, a filamentous green fresh-water alga, has concentrated uranium from a surface concrete ponds with elevated uranium levels (140-1140 ppb). The concentration factors (CFs) ranged from 8.9-67 with an average value of 22.Cladophora spp, a filamentous green marine alga has concentrated uranium from the marine water with a concentration factor ranged from 220–280. The average concentration factor was 250. The factors affecting the sorption process are discussed in detail. This revised version was published online in July 2006 with corrections to the Cover Date.     

Near-optimal design of Global Positioning System (GPS) networks using the Tabu Search technique

This paper describes an optimization technique based on an heuristic procedure which is applied to analyse and improve the efficiency of the design of Global Positioning System (GPS) surveying networks. GPS is a valuable survey tool because of its ability to increase the accuracy, speed and flexibility of a survey. A GPS network can be defined as a number of stations, which are co-ordinated by a series of sessions, formed by placing receivers on stations. The goal is to select the best order in which these sessions can be organised to give the best possible schedule. Generally, solving large networks to optimality requires impractical computational time. This paper proposes a Tabu Search technique which provides optimal or near-optimal solutions for large networks with an acceptable amount of computational effort. Computational results for several case studies with known and unknown optimal schedules have been presented to assess the performance of the proposed technique.     

Dynamics of Random One-Dimensional ±J Systems

Finite chains of a two-state random Potts spin model with periodic boundary conditions are studied within Glauber dynamics. The spin exchange is assumed random with frustration between ferro and antiferromagnetic values (±J). Time-dependent fluctuations are induced by periodic temperature oscillations. Master type differential equations for spin correlation functions are solved within linear response theory. The spectrum of relaxation times are calculated at different temperatures. The ±J Potts glass chains undergo a zero temperature phase transition. The barriers against inversion of the spin chain take only two values; 0 and 2|J|. The temperature behaviour of specific heat is characterized by rounded peaks. The frequency dependence displays two plateaus for the real part of specific heat and two corresponding peaks for the imaginary part. The dynamic specific heat is not affected by the longest relaxing mode like susceptibility. The time separation of the modes is demonstrated by the Cole-Cole plots.     

Heavy metal ion uptake properties of polystyrene-supported chelating polymer resins

Metal ion uptake properties of polystyrene-supported chelating polymer resins functionalized with (i) glycine, (ii) hydroxy benzoic acid, (iii) Schiff base and (iv) diethanol amine have been investigated. The effects of pH, time and initial concentration on the uptake of metal ions have been studied. The uptake of metal ion depends on pH. The resins are more selective at pH 10 for Pb(II) and Hg(II), whereas at pH 6 they are found to be Cd(II) and Cr(VI) selective. Metal ion uptake properties of resins follow Freundlich’s equation. The resins are recyclable and are therefore employed for the removal of heavy metal pollutants from industrial waste water.     

Synthesis and characterization of some oxodiperoxo molybdenum(VI) complexes of Morpholinomethyl urea and related ligands

The oxodiperoxo complexes of Mo(VI) of the type [MoO(O₂)₂L], where L = Morpholinomethyl urea, morpholinomethyl thiourea, piperidinomethyl urea, piperidinomethyl thiourea, pyrrolidinomethyl urea, and pyrrolidinomethyl thiourea have been synthesized and characterized by elemental analysis, molar conductance, IR, UV-Vis, and TGA/DTA techniques. It is shown that the ligands coordinate to the metal ion in a symmetrical bidentate fashion through heterocyclic nitrogen and carbonyl oxygen or thiocarbonyl sulfur. Thermal studies indicate continuous weight loss until a stable oxide is formed. The text was submitted by authors in English.