含聚醚间隔链的扩链脲改性环氧树脂/双氰双胺固化体系性能研究

合成了一系列含不同分子量聚环氧丙烷 (PPG)柔性间隔链的扩链脲 ,系统考察了扩链脲改性环氧树脂E 5 1/双氰双胺 (dicy)固化体系的固化反应活性、动态力学行为、冲击性能和断裂面形态结构 ,并对体系的冲击性能、形态结构与动态力学行为之间的关系进行了探讨 .结果表明 ,改性体系固化反应活性明显提高 ,固化反应表观活化能降低 ,固化反应峰顶温度从 190℃降低至 14 0℃ ,固化反应的表观活化能由 14 5 5kJ/mol降至 70～ 80kJ mol;改性体系冲击强度明显提高 ,其中所含PPG柔性链分子量为 10 0 0的扩链脲改性的E 5 1/dicy体系冲击强度较未改性的E 5 1/dicy体系提高了 8倍 ,其冲击试样断裂面的形态具有明显的韧性断裂特征 ,微观两相网络结构的存在导致了改性体系冲击强度显著提高     

C60大量、快速分离和电喷雾电离质谱检测

本文用配合沉淀和活性炭吸附相结合的方法，从高级富勒烯含量较高的混合物中，大量、快速分离Ｃ６０，并用电喷雾电离质谱对分离产物进行检测     

A M?ssbauer spectroscopic study on the action of Ce in the catalyst for dehydrogenation of etylbenzene to styrene

Two series of Fe-K catalysts for dehydrogenation of ethylbenzene to styrene were prepared with different amounts and different compounds of the additional element Ce. M?ssbauer spectroscopy has been used to determine the Fe compound in the catalyst and to investigate the effect of Ce. The catalytic properties of the catalysts have also been measured. The results show that the element Ce in the catalyst is favorable to form the predecessor of the catalytic active phase, the compound KFe₁₁O₁₇ and that the optimal percentage of CeO₂ is 8%～15% in the catalyst which is favorable to the formation of KFe₁₁O₁₇ and to get better catalytic properties.     

金属草酸盐基负极材料——离子电池储能材料的新选择

商业化锂离子电池石墨负极和锂盐过渡金属氧化物正极材料的储锂容量都已接近各自的理论值,探索下一代高能量密度电极材料是解决现阶段锂离子电池容量限制的关键。近年来,新型金属草酸基负极材料,借助其在金属离子电池中多元化储能机制诱发的较高储能效应在碱金属离子电池绿色储能材料领域备受关注。本文就金属草酸基材料在锂、钠、钾金属离子电池方面的最新研究进行了综述,着重介绍了材料的晶型结构、多元化储能机制及储能过程中的动力学特征,简单阐述了材料在电化学储能中存在的问题,分析了金属草酸基负极材料在形貌晶型控制、界面碳复合改性和金属元素掺杂方面的改性策略。最后,预测了金属草酸基负极材料在碱金属离子电池体系的发展方向。     

Design of a quad-stable piezoelectric energy harvester capable of programming the coordinates of equilibrium points

In this study, a novel quad-stable energy harvester (QEH) is developed, in which its coordinates of equilibrium points can be user-defined like programming. This programmable feature distinguishes the proposed QEH from all reported magnet-type or buckling-type vibration energy harvesters. It has the advantage that it is easy to develop a high-performance QEH by appropriately programming these coordinate points and customizing a personalized QEH for different vibration environments. The dynamic model is established by the Ritz method and the Lagrange equation. The analytical steady periodic response is obtained by the average method. When the excitation acceleration is 2 m/s², the peak power is 575 μW at 8.5 Hz. Also, the influence of the coordinate arrangement of the equilibrium points on the energy harvesting performance is studied. A formula that can quickly determine the equilibrium point coordinates is given, and the QEH designed according to this formula has superior performance. At last, the performance of the designed QEH is compared with other reported vibration energy harvesters. It shows that the QEH has a high average output power (287 μW), high normalized power density (59.8 μW/cm³/g²), and wide operating frequency range (8.4 Hz) among these harvesters.

     

多孔碳化棉复合SnO2锂离子电池负极材料的制备及性能研究

以脱脂棉为原料通过Mg2+模板法获取多孔碳化棉结构,再通过水热法在其表面及内部孔隙负载SnO2颗粒,获得多孔碳化棉与SnO2颗粒的复合材料.利用扫描电子显微镜(SEM)、拉曼光谱、X射线衍射分析(XRD)分析材料的微观形貌,利用循环伏安(CV)和电化学阻抗(EIS)测试评价其作为锂离子电池负极材料的电化学性能.结果表明,通过Mg2+模板法获取负载有SnO2颗粒的多孔碳化棉结构作为负极材料时,在300 mA/g的电流密度下,其容量在100圈后仍维持在500 mAh/g,是一种前景较为理想的锂离子电池负极复合材料.     

基于图像的二维剪纸自动生成方法

中国剪纸的设计极具挑战性, 要求画面简洁、直观, 还需要表达特定的文化内涵, 且整张剪纸须整体连通。提出了一种基于图像的二维剪纸自动生成方法, 能够将任意数码照片自动转化为剪纸图形。首先,利用图像分割方法建立区域连接图; 接着, 基于该连接图对颜色、边界对比度和区域连通性进行数学建模, 并获得优化目标函数; 最后, 通过模拟退火算法求解目标方程, 自动生成保持图像内容的剪纸图形。还开发了连通性后处理和区域指定等用户交互工具, 允许用户在自动生成的剪纸图形中方便地加入个人设计。实验表明, 所生成的剪纸图形画面简洁、整体连通。 本方法在降低剪纸设计难度的同时还可满足个性化的设计需求, 有助于传播和传承我国的民间剪纸艺术。     

Mode Distribution and Bandwidth Characteristic of Arbitrarily Trapezoidal-Groove Guide for Millimeter Waves

The modes TE and TM of arbitrarily trapezoidal-groove guide are analyzed by using the mode-matching method. The mode TE₁₁ is the dominant mode of the trapezoidal-groove guide under different conditions. The bandwidth characteristic and the operation condition for the single dominant mode are discussed. The obtained conclusions are of very important significance in theoretical study and practical application of trapeziodal-groove guides for millimeter waves.     

A Sedimentological Approach to Upscaling

Optimised upscaling in reservoir simulations requires the construction of realistic petrophysical properties that are representative of the heterogeneity in the sedimentary deposits. Reservoir heterogeneities are controlled by the arrangement of various hierarchies of sedimentary facies and their internal bounding surfaces. The conventional sedimentological approach to reservoir upscaling involves subdivision and ranking of various hierarchies of architectural units and associated bounding surfaces of the reservoir sequence according to their geological significance. This global upscaling approach produces realistic scaled up models that retain both the structural and non-structural heterogeneities of the original sedimentological models. Analyses of sedimentary sequences from various depositional environments indicate that the fractional Levy model can adequately describe the heterogeneity and scaling characteristics of individual genetic sediment sequences in the clastic sedimentary system without further subdividing and ranking of the heterogeneous sequences. The heterogeneous nature of each sedimentary system can be quantified by the Levy index parameter, whereas the maximum upscaling magnitude (or upscaling index) for a particular sequence can be determined from the Levy width parameter plot. Depositional modelling mimics the sedimentary processes in a range of scales and honours hierarchies of sedimentary facies and their bounding surfaces. It can be used effectively for upgridding and upscaling in accordance with the stratigraphic framework and sedimentological models. Both the fractional Levy model and the depositional modelling provide quantitative alternatives to the conventional global sedimentological upscaling approach.     

The transformation and the catalytic activity of iron sulfide in lignite liquefaction

The Mössbauer effect was used to study the decomposition of pyrite in the presence of tetralin and hydrogen atmosphere. Iron sulfide catalysts with different amounts of sulphur are prepared and their transformations and catalytic activities in coal hydroliquefaction are examined.