Sur le groupe des homographies et des antihomographies d'une variable complexe

Sans résumé     

Synthesis and Characterization of Optical Sol–Gel Adhesive for Military Protective Polycarbonate Resin

Sol–gel adhesive material for isostatic hotpressing lamination process was synthesized using 3-aminopropyltrimethoxysilane (APTES), 3-glycidyloxypropyltrimethoxysilane (GPTS) and methacryloxypropyltrimethoxysilane (MPTS) as precursors. Reaction dynamics between APTES and GPTS was followed on-line with Raman spectroscopy. The lamination process was optimized by varying hotpressing times and pressures at the constant temperature. Mechanical shear strength properties were found to be excellent for studied composition, 25–30 kg/cm² at its best. One possible application of laminated polycarbonate (PC) structure is a soldier helmet visor. Therefore, the ballistic protection properties were tested by shooting with 1.1 gram standard fragment, and determining the v₅₀ velocity value, which corresponds to 50% perforation. The laminated structure gave 5.7% better protection compared with the solid polycarbonate. The laminated components were found to have high optical transparency at the visible wavelengths as well as high environmental stability.     

Influence of spectral and angular sensitivity on the readout of biological dosimeters

Biological systems used as biological dosimeters can possess different angular sensitivities from the detectors usually used in physical devices. A simple experimental setup has been developed and used to measure the angular sensitivity of uracil thin-layer biological dosimeters. Results of angular sensitivity measurements for uracil thin-layer dosimeters are presented using a Xe arc lamp as the UV source. According to the experiments described here, uracil thin-layer dosimeters show a cosine-type angular dependence. In several indoor experiments broadband UV meters are used to control the applied dose rate from a given artificial UV source. The experimental setup has been designed and used to verify experimentally the importance of spectral and angular sensitivity differences of biological and physical UV meters applied in biological experiments. Model calculations for two different irradiation systems, using different geometrical arrangements of artificial UV sources, are also presented. For these arrangements relative dose rates that could be measured with dosimeters of arbitrary spectral, but different angular sensitivity have been calculated.     

Synthesis and characterization of novel elastomeric poly(D,L-lactide urethane) maleate composites for bone tissue engineering

Here, we report the synthesis and characterization of a novel 4-arm poly(lactic acid urethane)-maleate (4PLAUMA) elastomer and its composites with nano-hydroxyapatite (nHA) as potential weight-bearing composite. The 4PLAUMA/nHA ratios of the composites were 1:3, 2:5, 1:2 and 1:1. FTIR and NMR characterization showed urethane and maleate units integrated into the PLA matrix. Energy dispersion and Auger electron spectroscopy confirmed homogeneous distribution of nHA in the polymer matrix. Maximum moduli and strength of the composites of 4PLAUMA/nHA, respectively, are 1973.31 ± 298.53 MPa and 78.10 ± 3.82 MPa for compression, 3630.46 ± 528.32 MPa and 6.23 ± 1.44 MPa for tension, 1810.42 ± 86.10 MPa and 13.00 ± 0.72 for bending, and 282.46 ± 24.91 MPa and 5.20 ± 0.85 MPa for torsion. The maximum tensile strains of the polymer and composites are in the range of 5–93%, and their maximum torsional strains vary from 0.26 to 0.90. The composites exhibited very slow degradation rates in aqueous solution, from approximately 50% mass remaining for the pure polymer to 75% mass remaining for composites with high nHA contents, after a period of 8 weeks. Increase in ceramic content increased mechanical properties, but decreased maximum strain, degradation rate, and swelling of the composites. Human bone marrow stem cells and human endothelial cells adhered and proliferated on 4PLAUMA films and degradation products of the composites showed little-to-no toxicity. These results demonstrate that novel 4-arm poly(lactic acid urethane)-maleate (4PLAUMA) elastomer and its nHA composites may have potential applications in regenerative medicine.     

Synthesis of alkyl‐modified poly(sodium glutamate)s for preparation of polymer‐protein nanoparticles in combination with N,N,N‐trimethyl chitosan

The negatively charged, water‐soluble, hydrophobically modified poly(sodium glutamate)s containing different amounts of alkyl grafts were synthesized. First, poly(γ‐benzyl‐L‐glutamate) was prepared by ring‐opening polymerization of the corresponding N‐carboxyanhydride, which was in the next step aminolysed with octylamine. After removal of the remaining benzyl protective groups, the alkyl‐modified poly(sodium glutamate)s [P(Glu‐oa)] were obtained and, together with the oppositely charged N,N,N‐trimethyl chitosan (TMC), used for the preparation of nanoparticles (NPs) of a recombinant granulocyte colony‐stimulating factor (GCSF) protein by polyelectrolyte complexation method. It is observed that, beside electrostatic interaction, the hydrophobic grafts on poly(sodium glutamate)s significantly contribute to association efficiency (AE) with GCSF protein. The addition of TMC solution to the dispersion of GCSF/P(Glu‐oa) complexes results in formation of much more defined NPs with high AE and final protein loading. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2976–2985     

Synthesis of Fully O-Benzylated N-Linked Core Pentasaccharide Glycosyl Azide

The fully O-benzylated pentasaccharide glycosyl azide representing the common core structure of N-glycans was synthesized. The β-mannosidic linkage was created by C-2 epimerization of the initially introduced β-d- gluco-unit via DMSO/Ac₂O oxidation followed by stereoselective reduction with tetrabutylammonium borohydride.     

X-Ray Crystallography and Free Energy Calculations Reveal the Binding Mechanism of A2A Adenosine Receptor Antagonists

We present a robust protocol based on iterations of free energy perturbation (FEP) calculations, chemical synthesis, biophysical mapping and X-ray crystallography to reveal the binding mode of an antagonist series to the A_2A adenosine receptor (AR). Eight A_2AAR binding site mutations from biophysical mapping experiments were initially analyzed with sidechain FEP simulations, performed on alternate binding modes. The results distinctively supported one binding mode, which was subsequently used to design new chromone derivatives. Their affinities for the A_2AAR were experimentally determined and investigated through a cycle of ligand-FEP calculations, validating the binding orientation of the different chemical substituents proposed. Subsequent X-ray crystallography of the A_2AAR with a low and a high affinity chromone derivative confirmed the predicted binding orientation. The new molecules and structures here reported were driven by free energy calculations, and provide new insights on antagonist binding to the A_2AAR, an emerging target in immuno-oncology.     

Biological UV dosimeters in quality control of tanning tubes

Although according to the International Radiological Protection Association-International Non-Ionizing Radiation Committee recommendation (1991) the use of sunbeds for cosmetic purposes is not recommended, tanning devices are used widely. Ten different types of commercially available sunbed tubes have been studied using a uracil biological UV dosimeter, and three of them were analyzed in detail. Dimerization effectiveness of the tubes was measured directly, whereas efficiency of erythema induction was calculated weighting the emission spectra by the Commission Internationale de l'Eclairage erythema action spectrum. The data obtained demonstrate that quality control of sunbed tubes has to include not only the determination of the UV doses administered but also the assessment of the health risk due to the UVB and UVA components of the lamp. A method of quality control using the uracil biological dosimeter was elaborated, and the estimation of the "acceptable" exposure time was checked/controlled on 15 volunteers by assessing individually the erythema induction threshold. A correct classification of the sunbed tubes is proposed by characterizing the erythema induction versus DNA-damaging effectiveness of tubes.     

Enhancing maximum measurable sound reduction index using sound intensity method and strong receiving room absorption

The sound intensity method is usually recommended instead of the pressure method in the presence of strong flanking transmission. Especially when small and/or heavy specimens are tested, the flanking often causes problems in laboratories practicing only the pressure method. The purpose of this study was to determine experimentally the difference between the maximum sound reduction indices obtained by the intensity method, RI,max, and by the pressure method, Rmax. In addition, the influence of adding room absorption to the receiving room was studied. The experiments were carried out in an ordinary two-room test laboratory. The exact value of RI,max was estimated by applying a fitting equation to the measured data points. The fitting equation involved the dependence of the pressure-intensity indicator on measured acoustical parameters. In an empty receiving room, the difference between RI,max and Rmax was 4-15 dB, depending on frequency. When the average reverberation time was reduced from 3.5 to 0.6 s, the values of RI,max increased by 2-10 dB compared to the results in the empty room. Thus, it is possible to measure wall structures having 9-22 dB better sound reduction index using the intensity method than with the pressure method. This facilitates the measurements of small and/or heavy specimens in the presence of flanking. Moreover, when new laboratories are designed, the intensity method is an alternative to the pressure method which presupposes expensive isolation structures between the rooms.