A new method for atmospheric nitrogen dioxide measurements using the combination of a stripping coil and fluorescence detection.

A new stripping coil for the collection of nitrogen dioxide (NO2) has been developed to increase its versatility and efficiency. Nitrogen dioxide measurements based on quantitative collection through a reaction coil into an alkaline solution has been examined. Nitrogen dioxide is collected in a 0.1 N NaOH solution. This collection system has an efficiency of nearly 100%. The absorbed nitrogen dioxide has been measured by fluorescence detection with sub-ppbv detection limits. The excitation wavelength at 360 nm and the produced emission wavelength at 405 nm were suitable for nitrite ion measurements.     

A comparison of supercritical carbon dioxide and organic solvents for the intercalation of 4-phenylazoaniline into a pillared clay mineral

The intercalation of 4-phenylazoaniline (PAA) in supercritical carbon dioxide (SC-CO(2)) into montmorillonite (TMA-Mnt) pillared with tetramethylammonium ions at 313 K and 15 MPa was investigated. The adsorption rate and equilibrium PAA uptake were compared with those in n-hexane, CCl(4) and benzene solutions at 313 K. The XRD and N(2) adsorption/desorption analyses showed that TMA-Mnt after adsorption of PAA in SC-CO(2) had the same pore structure as after adsorption of PAA in normal solvents. SC-CO(2) was found to be a good medium for PAA adsorption owing to its having a relatively high adsorption rate and the highest adsorptivity at the same PAA concentration. The properties of PAA adsorption on TMA-Mnt could be well elucidated by the difference in solubility parameters between liquid and solid phases.     

Synthesis of o-LiMnO2 by Microwave Irradiation and StudyIts Heat Treatment and Lithium Exchange

Microwave irradiation of a suspension of γ-MnOOH in a 4 mol dm⁻³ LiOH solution brought about a rapid formation of semicrystalline orthorhombic LiMnO₂ (o-LiMnO₂) within 30 min at 120°C. Cubic Li_1.6Mn_1.6O₄ was obtained by heating o-LiMnO₂ at 400°C; lithium could be topotactically extracted from Li_1.6Mn_1.6O₄ with acid to form cubic H_1.6Mn_1.6O₄.     

Evidence of conformational equilibrium of 1-ethyl-3-methylimidazolium in its ionic liquid salts: Raman spectroscopic study and quantum chemical calculations

Raman spectra of liquid 1-ethyl-3-methylimidazolium (EMI+) salts, EMI(+)BF4-, EMI(+)PF6-, EMI(+)CF3SO3-, and EMI(+)N(CF3SO2)2-, were measured over the frequency range 200-1600 cm(-1). In the range 200-500 cm(-1), we found five bands originating from the EMI+ ion at 241, 297, 387, 430, and 448 cm(-1). However, the 448 cm(-1) band could hardly be reproduced by theoretical calculations in terms of a given EMI+ conformer, implying that the band originates from another conformer. This is expected because the EMI+ involves an ethyl group bound to the N atom of the imidazolium ring, and the ethyl group can rotate along the C-N bond to yield conformers. The torsion energy for the rotation was then theoretically calculated. Two local minima with an energy difference of ca. 2 kJ mol(-1) were found, suggesting that two conformers are present in equilibrium. Full geometry optimizations followed by normal frequency analyses indicate that the two conformers are those with planar and nonplanar ethyl groups against the imidazolium ring plane, and the nonplanar conformer is favorable. It elucidates that bands at 241, 297, 387, and 430 cm(-1) mainly originate from the nonplanar conformer, whereas the 448 cm(-1) band does originate from the planar conformer. Indeed, the enthalpy for conformational change from nonplanar to planar EMI+ experimentally obtained by analyzing band intensities of the conformers at varying temperatures is practically the same as that evaluated by theoretical calculations. We thus conclude that the EMI+ ion exists as either a nonplanar or planar conformer in equilibrium in its liquid salts.     

Diffusion Monte Carlo study of correlation in the hydrogen molecule

The diffusion Monte Carlo (DMC) method shows that correlation in H₂ produces a set of three spatial changes: (i) an enhancement in the electron density distribution n( r ) in the left and right anti‐binding regions that include separately the immediate vicinity of each of the two nuclei, (ii) a reduction in n( r ) in the binding region intervening between the two nuclei as a counterbalance, and (iii) a concomitant increase in the equilibrium internuclear separation. It is stressed that the correlation energy E^c (= T^c + V^c) for diatomic molecules be defined by the difference in the total energy between the exact and the Hartree–Fock (HF) variational calculations that are performed at individually optimized internuclear separations. It is this definition that makes it possible to involve a significant contribution from a correlation‐induced change in the equilibrium internuclear separation as part of the correlation energy and to relate (i) and (ii) to (iii) in consistency with the electrostatic theorem. The present calculations fulfill the virial theorem to an accuracy of ?V/T = 2.00 for DMC and ?V^HF/T^HF = 2.000 for HF. The present correlation energy E^c = ?0.0408 hartree is not only in good agreement with the most accurate value previously reported, but also can be analyzed into all its components in accordance with the correlational virial theorem 2T^c + V^c = 0. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Recent progress in the improvement of hydrothermal stability of zeolites

Zeolites have been successfully employed in many catalytic reactions of industrial relevance. The severe conditions required in some processes, where high temperatures are frequently combined with the presence of steam, highlight the need of considering the evolution of the catalyst structure during the reaction. This review attempts to summarize the recently developed strategies to improve the hydrothermal framework stability of zeolites.

This review attempts to summarize the recently developed strategies to improve the hydrothermal framework stability of zeolites.     

Highly edge-connected factors using given lists on degrees

Let G be a 2k-edge-connected graph with and let for every . A spanning subgraph F of G is called an L-factor, if for every . In this article, we show that if for every , then G has a k-edge-connected L-factor. We also show that if and for every , then G has a k-edge-connected L-factor.     

Modeling Thioredoxin Reductase-Like Activity with Cyclic Selenenyl Sulfides: Participation of an NH⋅⋅⋅Se Hydrogen Bond through Stabilization of the Mixed Se−S Intermediate

At the redox-active center of thioredoxin reductase (TrxR), a selenenyl sulfide (Se−S) bond is formed between Cys497 and Sec498, which is activated into the thiolselenolate state ([SH,Se⁻]) by reacting with a nearby dithiol motif ([SH^Cys59,SH^Cys64]) present in the other subunit. This process is achieved through two reversible steps: an attack of a cysteinyl thiol of Cys59 at the Se atom of the Se−S bond and a subsequent attack of a remaining thiol at the S atom of the generated mixed Se−S intermediate. However, it is not clear how the kinetically unfavorable second step progresses smoothly in the catalytic cycle. A model study that used synthetic selenenyl sulfides, which mimic the active site structure of human TrxR comprising Cys497, Sec498, and His472, suggested that His472 can play a key role by forming a hydrogen bond with the Se atom of the mixed Se−S intermediate to facilitate the second step. In addition, the selenenyl sulfides exhibited a defensive ability against H₂O₂-induced oxidative stress in cultured cells, which suggests the possibility for medicinal applications to control the redox balance in cells.