Temperature and velocity measurement of a 3-D thermal flow field using thermo-sensitive liquid crystals

It is an important challenge to analyze a three-dimensional thermal flow field in engineering, science, and agriculture. For such an analysis, it is essential to measure physical quantities such as temperature and velocity over the entire thermal flow field. This paper presents a measurement system based on color image processing for temperature and velocity vector distributions in a three-dimensional thermal flow field. Flow visualization is accomplished by the use of thermo-sensitive liquid crystal tracers. An algorithm for the color-to-temperature transformation using a multi-layer feed-forward neural network is applied to three-dimensional natural convection in a rotating cylindrical cell. Two-dimensional temperature distributions in a slit plane are obtained by using the algorithm. A three-dimensional temperature distribution is consequently constructed by interpolating the two-dimensional distributions using the B-spline function. In addition, the Spatio-Temporal correlation method is applied to the natural convection to obtain a three-dimensional velocity vector distribution.     

Synthesis of the proposed structure of plakevulin A: revised structure of plakevulin A

A total synthesis of the proposed structure of plakevulin A was accomplished. However, the NMR spectral data of the synthetic plakevulin A were not identical of those of the reported compound. We next converted the synthetic plakevulin A into 1-dihydrountenone A. The ¹H and ¹³C NMR spectral data of 1-dihydrountenone A were identical with those of reported plakevulin A except for the peaks derived from levulinic acid. Thus, we repurified sample of the natural product and confirmed that the natural sample contained 1-dihydrountenone A and levulinic acid in the ratio of one to one. We also found that not plakevulin A but 1-dihydountenone A possessed the inhibitory activity against mammalian DNA polymerases α and β.     

Studies on monobactams II. Synthesis and β-lactamase inhibitory activity of 4α-methyl-3-[(thien-2-yl)-methylene]-2-azetidinone-1-sulfonate

Two monobactam derivatives, potassium 4-methyl-(3E)-[(thien-2-yl)methylene]-2-azetidinone-1-sulfonate and its (3Z)-isomer, were prepared and evaluated for their -lactamase inhibitory activities. These compounds were devoid of -lactamase inhibitory activity.SynPhar Laboratories Inc., #2, 4290-91A Street, Edmonton, Alberta T6E 5V2, Canada. Tokushima Research Institute, Taiho Pharmaceutical Co., Ltd., 224-2 Ebisuno Hiraishi, Kawauchi-cho, Tokushima 771-01, Japan. Published in Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1548–1552, November, 1998.     

A stannylene strategy for regioselective acylation and phosphorylation of 1,2-cyclohexylidene-myo-inositol. Its convenient resolution and phosphatidylinositol synthesis

The bis(dibutylstannylene) derivative of 1,2-cyclohexylidene-myo-inositol reacted with (S)-O-acetylmandeloyl chloride and diphosphate tetraesters to give 3,6-dimandelate and 3-phosphate, respectively. Using the stannylene methodology for the optical resolution and regioselective phosphorylation of the ketal, a concise synthesis of phosphatidylinositol with the natural configuration was accomplished.     

SINGLE AND DOUBLE EDGE INTERFACE CRACK SOLUTIONS FOR ARBITRARY FORMS OF MATERIAL COMBINATION

In this paper interfacial edge crack problems are considered by the application of the finite element method. The stress intensity factors are accurately determined from the ratio of crack-tip-stress value between the target given unknown and reference problems. The reference problem is chosen to produce the singular stress fields proportional to those of the given unknown problem. Here the original proportional method is improved through utilizing very refined meshes and post-processing technique of linear extrapolation. The results for a double-edge interface crack in a bonded strip are newly obtained and compared with those of a single-edge interface crack for different forms of combination of material. It is found that the stress intensity factors should be compared in the three different zones of relative crack lengths. Different from the case of a cracked homogeneous strip, the results for the double edge interface cracks are found to possibly be bigger than those for a single edge interface crack under the same relative crack length.     

A Nonenzymatic Kinetic Resolution of (±)-trans-2-Arylcyclohexanols via Esterification Using Polymer-Supported DCC,DMAP, and 3β-Acetoxyetienic Acid

A nonenzymatic kinetic resolution of (±)-trans-2-arylcyclohexanols was carried out by esterification using polymer-supported N,N′-dicyclohexylcarbodiimide (DCC), dimethylaminopyridine (DMAP), and 3β-acetoxyetienic acid. The efficiency of the kinetic resolution was comparable to the enzymatic method when arylcyclohexanols bearing a condensed-aromatic ring were used.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communication® to view the free supplemental file.     

An Alumanylyttrium Complex with an Absorption due to a Transition from the Al−Y Bond to an Unoccupied d-Orbital

The reaction between a dialkyl-substituted alumanyl anion and [Y(CH₂SiMe₃)₂(thf)₃][BPh₄] resulted in the formation of (dialkylalumanyl)yttrium complex 2 , which exhibits the first 2-center–2-electron (2 c-2 e) Al−Y bond. The ¹H and ¹³C NMR spectra of 2 together with an X-ray crystallographic analysis indicated a C_2v symmetrical structure. DFT calculations on 2 revealed that its LUMO consists of overlapping 3 p- and 4 d-orbitals of the Al and Y atoms, respectively, and that the HOMO–LUMO gap is narrow. The UV/Vis spectrum of 2 exhibited a visible absorption at 432 nm, which suggests that the strong σ-donating and π-accepting character of the three-coordinate dialkylalumanyl ligand generates a colored d⁰-complex that does not contain any π-electrons.     

Single-Step N-Terminal Modification of Proteins via a Bio-Inspired Copper(II)-Mediated Aldol Reaction

The chemical modification of proteins is an effective technique for manipulating the properties and functions of proteins, and for creating protein-based materials. The N-terminus is a promising target for single-site modification that provides modified proteins with uniform structures and properties. In this paper, a copper(II)-mediated aldol reaction with 2-pyridinecarboxaldehyde (2-PC) derivatives is proposed as an operationally simple method to selectively modify the N-terminus of peptides and proteins at room temperature and physiological pH. The copper(II) ion activates the N-terminal amino acids by complexation with an imine of the N-terminal amino acid and 2-PCs, realizing the selective formation of the nucleophilic intermediate at the N-terminus. This results in a stable carbon-carbon bond between the 2-PCs and the α-carbon of various N-terminal amino acids. The reaction is applied to four different proteins, including biopharmaceuticals such as filgrastim and trastuzumab. The modified trastuzumab retains the human epidermal growth factor receptor 2 recognition activity.     

Synthesis and toxicity assay of ceramic nanophosphors for bioimaging with near-infrared excitation

Yttrium hydroxyl carbonate (Y(OH)CO₃) precursors were synthesized by the homogeneous co-precipitation method in the presence of polyacrylic acid (PAAc). Resultant precursor particle size is about 15–20 nm with narrow size distribution whereas the particle size is smaller than those acquired by the conventional homogeneous precipitation method. Effective decrease of Y(OH)CO₃ particle size was found to be higher for the presence of weak polyanionic ionomer such as PAAc than the presence of strong polyanionic ionomer such as sodium polystyrene sulfonate (PSS). It was observed that the morphology and size of the precursors are almost unchanged after the calcination process. Er³⁺ doped Y₂O₃ nanoparticles were synthesized by PAAc assisted homogeneous co-precipitation method showed bright green (550 nm) and red (660 nm) upconversion (UC) as well as near-infrared (NIR) fluorescence (1550 nm) under 980-nm excitation. UC and NIR fluorescence bioimaging and in-vitro cytotoxicity assay of Er³⁺ doped Y₂O₃ nanoparticles were successfully attempted with commercially available macrophages and B-cell hybridomas. Cellular uptake of nanoparticles is evidenced from bright field, UC and NIR fluorescence images of macrophages.