Physical properties of glycosaminoglycan hydrogels

The chemical composition of glycosaminoglycan (GAG) hydrogels was found to have a profound effect on the physical properties of gels. Hyaluronan (HA) and chondroitin sulfate (CS) were each modified with adipic dihydrazide (ADH) with carbodiimide chemistry. The resulting polymer was crosslinked with various concentrations of poly(ethylene glycol) dialdehyde (PEG‐diald) to produce a series of hydrogels. The physical properties of these GAG hydrogels varied in a concentration‐dependent fashion. Maximal crosslinking was observed at a theoretical crosslinking of 50% for the HA‐ADH‐PEG‐diald hydrogels and 75% for the CS‐ADH‐PEG‐diald hydrogels. Adding PEG‐diald beyond the optimum for crosslinking prolonged the in vitro enzymatic degradation time of the hydrogels. The swelling of the crosslinked GAG hydrogels was correlated with the amount of PEG‐diald used rather than with the crosslinking density. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4344–4356, 2004     

Mode beating in spot-size converter lasers

An anomalous modulation in the wavelength spectrum has been observed in lasers with spot-size converters. This intensity modulation is shown to be caused by beating between the fundamental lasing mode and radiation modes in the taper. This results in a periodic modulation in the net gain spectrum, which causes wavelength jumps between adjacent net gain maxima, and a drive current dependent spectral width that is expected to affect system performance. The amplitude of this spectral modulation is reduced significantly by either using an angled rear-facet which reflects the beating radiation modes away from the laser axis, or by using a nonlinear, adiabatic taper.     

Another independent self-dual basis for the trivial variety

We give a new independent self-dual 3-basis for the trivial variety with two binary operations. Received October 24, 2006; accepted in final form January 25, 2007.     

Mode-locking dynamics of a laser coupled to an empty external cavity

The effect of incorporating an empty external cavity into the feedback loop of a mode-locked laser is investigated. Particular attention is paid to the response of the mode-locking as the external cavity is detuned by a fraction of a wavelength from the round trip transit time associated with the laser. The results for two regimes of operation are presented. In the first case a series of short lived transients develop whereas the other case leads to a persistent intermittent Q-switching scenario, where mode-locking fails. The role of coupling between the cavities and the laser's memory time in relation to the results is discussed. A mechanism for the improved mode-locking observed with non-linear external cavities is suggested.     

Structure and catalytic activity of some soluble polyethylene glycol-peptide conjugates

Soluble catalysts for the Juliá-Colonna asymmetric epoxidation reaction have been constructed in three different ways, using NH₂-PEG-OMe as the support system: suitable solvents have been identified and it is shown that the degree of helicity of the conjugates correlates with the extent of conversion and (to a lesser extent) the enantioselectivity of epoxidation.     

Four unit linking groups IV. Liquid crystals of positive dielectric anisotropy

Three separate series of new materials of weak to strongly positive dielectric anisotropy have been prepared. Each series contains four sub-sets of materials each incorporating a different four unit linking group (i.e., C₄H₈, C₄H₆, C₃H₆O and C₃H₄O) and the same series of end groups (i.e. F, CN and OCF₃) in various substitution patterns. The synthesis and liquid crystal transition temperatures of these novel substances are described and compared with those of the corresponding materials incorporating standard central linkages (i.e.-, C₂H₄, CH₂O, COO). The effect of an additional trans carbon-carbon double bond in the terminal alkyl chain and in the central linking unit has also been studied.     

Effect of stoichiometry on liquid crystalline supramolecular polymers formed with complementary nucleobase pair interactions

We report herein studies on the liquid crystalline behavior of a series of supramolecular materials that contain different ratios of two complementary symmetrically-substituted alkoxy-bis(phenylethynyl)benzene AA- and BB-type monomers. One monomer has thymine units placed at either end of the rigid mesogenic core, while the other has N⁶-(4-methoxybenzoyl)-adenine units placed on the ends. Differential scanning calorimetric and polarized optical microscopy studies have been carried out on these systems. These studies show that the material's behavior is strongly dependent on its thermal history. As a result, the materials can exhibit, on heating, either a liquid crystalline phase, a crystalline phase, or the coexistence of crystalline and liquid crystalline regions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5049–5059, 2006     

An alternative method for the certification of the sulfur mass fraction in coal Standard Reference Materials

The S mass fractions of coal SRMs 2682b, 2684b, and 2685b are certified by direct comparison with coal SRMs 2682a, 2684a, and 2685a, respectively, using high-temperature combustion analysis with infrared (IR) absorption detection. The S mass fractions of the "a" materials used for calibration were previously determined by means of isotope-dilution thermal-ionization mass spectrometry (ID-TIMS). Therefore, the comparisons performed with the combustion-IR absorption method establish direct traceability links to accurate and precise ID-TIMS measurements. The expanded uncertainties associated with the certified S mass fractions are of approximately the same magnitude as would be expected for the ID-TIMS methodology. An important aspect of these certifications is that each "b" material is essentially identical with the corresponding "a" material, because both were produced from the same bulk, homogenized coal. As a test of the efficacy of the new certification approach when calibrant and unknown are not identical, the S mass fraction of coal SRM 2683b has been determined by direct comparison to coal SRM 2683a. These two coals, which have both previously been analyzed with ID-TIMS, are different in terms of S content and other properties. Whereas the S mass fraction for SRM 2683b determined with the new methodology agrees statistically with the ID-TIMS value, there is reason for caution in such cases. In addition to the usefulness of the alternative approach for certification activities within NIST, this approach might also be an excellent way of establishing NIST traceability during the value assignment process for reference materials not issued by NIST. Further research is needed, however, to understand better the scope of applicability.     

Synthesis and antifolate activity of 8,10-dideazaminopterin

A synthesis of 8,10-dideazaminopterin, using 2,4-diamino-6-bromomethyl-8-deazapteridine ( 2 ) as a key intermediate, is described. Condensation of the triphenylphosphinylide derived from 2 with p-formylbenzoyl-L-glutamate afforded a 9,10-dehydro-8,10-dideazaminopterin ester intermediate 5 . Hydrogenation of the olefinic linkage and subsequent hydrolysis of the glutamate ester gave the title compound. 8,10-Dideazaminopterin was a potent growth inhibitor of folate dependent bacteria. It was 16 times more potent then methotrexate as an inhibitor of dihydrofolate reductase derived from L1210 leukemia cells, and showed strong activity against L1210 in mice.