Physical properties of glycosaminoglycan hydrogels

The chemical composition of glycosaminoglycan (GAG) hydrogels was found to have a profound effect on the physical properties of gels. Hyaluronan (HA) and chondroitin sulfate (CS) were each modified with adipic dihydrazide (ADH) with carbodiimide chemistry. The resulting polymer was crosslinked with various concentrations of poly(ethylene glycol) dialdehyde (PEG‐diald) to produce a series of hydrogels. The physical properties of these GAG hydrogels varied in a concentration‐dependent fashion. Maximal crosslinking was observed at a theoretical crosslinking of 50% for the HA‐ADH‐PEG‐diald hydrogels and 75% for the CS‐ADH‐PEG‐diald hydrogels. Adding PEG‐diald beyond the optimum for crosslinking prolonged the in vitro enzymatic degradation time of the hydrogels. The swelling of the crosslinked GAG hydrogels was correlated with the amount of PEG‐diald used rather than with the crosslinking density. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4344–4356, 2004     

Mode beating in spot-size converter lasers

An anomalous modulation in the wavelength spectrum has been observed in lasers with spot-size converters. This intensity modulation is shown to be caused by beating between the fundamental lasing mode and radiation modes in the taper. This results in a periodic modulation in the net gain spectrum, which causes wavelength jumps between adjacent net gain maxima, and a drive current dependent spectral width that is expected to affect system performance. The amplitude of this spectral modulation is reduced significantly by either using an angled rear-facet which reflects the beating radiation modes away from the laser axis, or by using a nonlinear, adiabatic taper.     

Electron energy loss spectroscopy; history and related matters

This paper begins with some historical remarks regarding the author’s early interest in the use of electron energy loss spectroscopy to probe dynamical phenomena on crystal surfaces. We then discuss the physical nature of the interactions responsible for vibrational and spin waves losses, with attention to their role in related phenomena. PACS 61.14.-x; 68.35.Ja; 68.49.Jk; 68.49.Uv     

Characterisation of the photocatalyst Pilkington Activ™: a reference film photocatalyst?

Pilkington Glass Activ™ represents a possible suitable successor to P25 TiO₂, especially as a benchmark photocatalyst film for comparing other photocatalyst or PSH self-cleaning films. Activ™ is a glass product with a clear, colourless, effectively invisible, photocatalytic coating of titania that also exhibits PSH. Although not as active as a film of P25 TiO₂, Activ™ vastly superior mechanical stability, very reproducible activity and widespread commercial availability makes it highly attractive as a reference photocatalytic film. The photocatalytic and photo-induced superhydrophilitic (PSH) properties of Activ™ are studied in some detail and the results reported. Thus, the kinetics of stearic acid destruction (a 10⁴ electron process) are zero order over the stearic acid range 4–129 monolayers and exhibit formal quantum efficiencies (FQE) of 0.7×10⁻⁵ and 10.2×10⁻⁵ molecules per photon when irradiated with light of 365±20 and 254 nm, respectively; the latter appears also to be the quantum yield for Activ™ at 254 nm. The kinetics of stearic acid destruction exhibit Langmuir–Hinshelwood-like saturation type kinetics as a function of oxygen partial pressure, with no destruction occurring in the absence of oxygen and the rate of destruction appearing the same in air and oxygen atmospheres. Further kinetic work revealed a Langmuir adsorption type constant for oxygen of 0.45±0.16 kPa⁻¹ and an activation energy of 19±1 kJ mol⁻¹. A study of the PSH properties of Activ™ reveals a high water contact angle (67°) before ultra-bandgap irradiation reduced to 0° after prolonged irradiation. The kinetics of PSH are similar to those reported by others for sol–gel films using a low level of UV light. The kinetics of contact angle recovery in the dark appear monophasic and different to the biphasic kinetics reported recently by others for sol–gel films [J. Phys. Chem. B 107 (2003) 1028]. Overall, Activ™ appears a very suitable reference material for semiconductor film photocatalysis.     

Calculation of number and free energy of the conformers of linear alkanes with medium and long chains. Implications for catalysis

A method for calculating the number of rotamers of a linear alkane and of the number of rotamers with a given number of gauche conformations along the chain as a function of the total number of atoms in the chain, using general equations, is presented. A graphical method for generating individual rotamers was applied to the homologs up to decane, which has 1134 rotamers. The steric energies calculated by molecular mechanics (MM2 force field) were used as measures of the heat of formation for the coiled conformations relative to the anti conformer for each molecule, whereas the statistical entropy differences were calculated for classes of coiled rotamers grouped by the number of gauche bonds and steric energy. The free energy values calculated from these components show that already at 400 K hexane exists preferentially in conformations containing gauche bonds. For larger chains the free energy advantage for the coiled chains increases very steeply. The implications for the question of reactions of linear alkanes occurring on the surface or inside the channels of small- and medium-pore zeolites are briefly examined.     

Another independent self-dual basis for the trivial variety

We give a new independent self-dual 3-basis for the trivial variety with two binary operations. Received October 24, 2006; accepted in final form January 25, 2007.     

Mode-locking dynamics of a laser coupled to an empty external cavity

The effect of incorporating an empty external cavity into the feedback loop of a mode-locked laser is investigated. Particular attention is paid to the response of the mode-locking as the external cavity is detuned by a fraction of a wavelength from the round trip transit time associated with the laser. The results for two regimes of operation are presented. In the first case a series of short lived transients develop whereas the other case leads to a persistent intermittent Q-switching scenario, where mode-locking fails. The role of coupling between the cavities and the laser's memory time in relation to the results is discussed. A mechanism for the improved mode-locking observed with non-linear external cavities is suggested.     

The use of combined LC-GC for the analysis of fuel products: A review

A review of the analysis of petroleum fuels, oils, tars and engine exhaust particulate extracts by on-line coupled LC-GC is presented.     

Progress in the quality assurance of environmental trace organic analysis

An overview is given on the stepwise learning programmes undertaken to identify the main sources of error associated with the determination of the mandatory organic contaminants in the marine monitoring programmes. Details are given on the preparation and use of LRMs and CRMs to maintain analytical control and quantify the laboratory errors in relation to the measurement of changes in the environment.