Coriolis耦合对Cl+H2→H+HCl非绝热反应的影响

使用含时波包方法 ,在Capecchi和Werner拟合的非绝热耦合势能面上 ,研究了Cl处在自旋轨道基态以及自旋轨道激发态时与H2 反应的活性 ,并且讨论了Coriolis耦合的影响 .计算了某些角动量时的反应几率 .计算结果显示 ,当Cl原子处在自旋轨道激发态与处在基态的H2 的反应活性很小 ,Coriolis耦合在这个反应中起了很小的作用 .     

将SVRT模型应用到单原子多原子反应F+CH2D2→CH2D/CHD2+DF/HF中

由于含时波包方法具有经典的直观又不乏量子力学的准确 ,选择含时波包方法来处理F +CH2 D2 →CH2 D/CHD2 +DF/HF反应 .把半刚性振转子 (SVRT)模型应用到该反应体系中 ,研究了两个通道中该反应从基态反应物开始在修正过的J1(MJ1)势能面上计算出来了反应几率、积分截面、速率常数 .反应几率随能量变化的图的数值结果给出了振荡结构 ,这些振荡结构是可以和动力学振荡联系起来的 .而这些振荡结构在积分截面随着能量变化的图中就被反应几率求和后的平均结果所掩盖了 .速率常数和实验结果的比较也得到了较好的结果 .     

锂电池Li／KIBr2—非水体系的研究

本非水电池体系由Ｌｉ负极、多孔石墨电极和电解质溶液组成；电解质溶液由无机溶剂ＰＯＣｌ＿３（或有机溶剂硝基苯）和溶解在该溶剂中的活性物质（ＫＩＢｒ＿２）及支持电解质构成。该电池体系的开路电压为８．５０伏左右，放电性能良好，可望在实际中得到应用。此外，对电池体系的反应机理也作了初步的探讨。     

Density functional study of the l-proline-catalyzed α-aminoxylation of aldehydes reaction: The reaction mechanism and selectivity

The reaction mechanism of the l-proline-catalyzed α-aminoxylation reaction between aldehyde and nitrosobenzene has been investigated using density functional theory (DFT) calculation. Our calculation results reveal following conclusions [1]. The first step that corresponds to the formation of C–O bond, is the stereocontrolling and rate-determining step [2]. Among four reaction channels, the syn-attack reaction channel is more favorable than that of the anti one, and the TS-ss channel dominates among the four channels for this reaction in the step of C–O bond formation [3]. The intermolecular hydrogen bond between the acidic hydrogen of l-proline and the N atom of the nitrosobenzene in an early stage of the process catalyzes very effectively the C–O bond formation by a large stabilization of the negative charge that is developing at the O atom along the electrophilic attack [4]. The effect of solvent decreases the activation energy, and also, the calculated energy barriers are decrease with the enhancement of dielectric constants for C–O bond formation step. These results are in good agreement with experiment, and allow us to explain the origin of the catalysis and stereoselectivity for l-proline-catalyzed α-aminoxylation of aldehyde reaction. The addition of H₂O to substituted imine proline, intermolecular proton-transfer steps, and the l-proline elimination process were also studied in this paper.     

2-(苯并噻唑-2-基)-5-(N,N-二乙基氨基)苯酚衍生物的合成及其对H2S的识别

以4-N,N-二乙基氨基水杨醛为原料,制备了2-(苯并噻唑-2-基)-5-(N,N-二乙基氨基)苯酚衍生物(探针L),并对其结构进行了表征。在DMSO/PBS(体积比3∶7,pH=7.4)溶液中,探针L具有高选择性并可荧光"关-开"识别H_2S,在365nm紫外灯照射下,由无荧光变成蓝色荧光。实验表明,探针L识别H_2S的检测限为2.05×10~(-6)mol/L,pH适用范围为6～9,可用于检测实际水样中的H_2S。     

利用“网包法”制备高效液相色谱大环抗生素类手性固定相

万古霉素和替考拉宁都属于糖肽类的大环抗生素，具有立体的环状结构和多个手性中心，是两种常见的手性识别材料，广泛应用于对映体的色谱手性分离分析。该文以万古霉素和替考拉宁为手性选择剂，哌嗪为单体，4，4'-二苯基甲烷二异氰酸酯（MDI）、1，6-己二异氰酸酯（HDI）和2，4-甲苯二异氰酸酯（TDI）为交联剂，通过界面聚合反应形成网状层包裹硅胶载体的方法制得6种高效液相色谱手性固定相，用于分离外消旋化合物，并与MDI直接交联万古霉素和替考拉宁在硅胶表面所得固定相进行了比较。结果表明，利用"网包法"和直接交联法制备的手性柱与商品万古霉素和替考拉宁柱之间具有互补性，均对不同的外消旋体有不同程度的拆分。     

用草酸胍制备钴酸盐尖晶石

本文采用先驱物法合成钴酸盐尖晶石MCo₂O₄(M=Zn,Ni,Cu,Mg,Cd,Mn)。以草酸胍作为沉淀剂，在溶液中以共沉淀的方法合成草酸盐先驱物。采用热分析(TG和DTA)、化学元素分析、红外光谱等手段对先驱物进行分析表征。通过红外光谱、X射线粉末衍射、扫描电镜对产物进行表征。产物的平均粒度范围在3.5～8.8 μm之间。     

Size effect of lead-free halide double perovskite on luminescence property

Lead-free halide double perovskites have gathered wide scientific interest since they are environmentally friendly and stable.However,compared to the lead perovskites,their optoelectronic properties are compromised.Herein we report a series of bulk lead-free mixed Bi-In halide double perovskites:Cs_2AgBi_(1-x)In_xCl_6(0x1).The Cs_2AgBi_(0.125)In_(0.875)Cl_6breaks the parity-forbidden transition and retains direct band gap structure,having warm-white light emission,with photoluminescence quantum efficiency(PLQE)of 70.3%,much higher than the PLQE of reported lead perovskite materials.Its exciton self-trapping dynamics is investigated.Meanwhile,the Cs_2AgBi_(0.125)In_(0.875)Cl_6nanocrystals and Cs_2AgBi_(0.125)In_(0.875)Cl_6microcrystals can be synthesized by modified hot injection and rapid cooling crystallization,respectively.The size effect of Cs_2AgBi_(0.125)In_(0.875)Cl_6is studied on the photoluminescence(PL)property.Additionally,the bulk material exhibits excellent stability on exposure to light,humidity and air for more than 3 months.It is a promising candidate as highly efficient warm white-light emitting material for road lighting.     

Synthesis,isolation and characterization of methyl levulinate from cellulose catalyzed by extremely low concentration acid

A direct synthesis of methyl levulinate from cellulose alcoholysis in methanol medium under mild condition (180–210 °C) catalyzed by extremely low concentration sulfuric acid (≤0.01 mol/L) and the product isolation were developed in this study. Effects of different process variables towards the catalytic performance were performed as a function of reaction time. The results indicated that sulfuric acid concentration, temperature and initial cellulose concentration had significant effects on the synthesis of methyl levulinate. An optimized yield of around 50% was achieved at 210 °C for 120 min with sulfuric acid concentration of 0.01 mol/L and initial cellulose concentration below 100 g/L. The resulting product mixture was isolated by a distillation technique that combines an atmospheric distillation with a vacuum distillation where n-dodecane was added to help distill the heavy fraction. The light fraction including mainly methanol could be reused as the reaction medium without any substantial change in the yield of methyl levulinate. The chemical composition and structural of lower heavy fraction were characterized by GC/MS, FTIR, ¹H-NMR and ¹³C-NMR techniques. Methyl levulinate was found to be a major ingredient of lower heavy fraction with the content over 96%. This pathway is efficient, environmentally benign and economical for the production of pure levulinate esters from cellulose.     

The photoisomerization of 11‐cis‐retinal protonated schiff base in gas phase: Insight from spin‐flip density functional theory

This extensive theoretical study employed the spin‐flip density functional theory (SFDFT) method to investigate the photoisomerization of 11‐cis‐retinal protonated Schiff base (PSB11) and its minimal model tZt‐penta‐3,5‐dieniminium cation (PSB3). Our calculated results indicate that SFDFT can perform very well in describing the ground‐ and excited‐state geometries of PSB3 and PSB11. We located the conical intersection (CI) point and constructed the photoisomerization reaction path of PSB3 and PSB11 by using the SFDFT method. To further verify the SFDFT results, we computed the energy profiles along the constructed linearly interpolated internal coordinate (LIIC) pathways by using high‐level theoretical methods, such as the EOM‐CCSD, CR‐EOM‐CCSD(T), CASPT2, NEVPT2, and XMCQDPT2 methods. The SFDFT method predicts that the photoisomerization of PSB3 is barrierless, in accordance with previous complete‐active‐space self‐consistent‐field (CASSCF) results. However, an energy barrier is predicted along the LIIC pathways of PSB11. This finding is different from previous CASSCF results and may indicate that the photoisomerization of PSB11 in gas phase is similar to that in solution. However, the higher spin contamination of the SFDFT method in the vicinity of the CI point caused the located CI geometry to deviate from that of the real CI. In addition, the LIIC pathways are only approximations to the minimum energy path (MEP). Thus, further experimental and theoretical studies are needed to verify the existence of an energy barrier along the photoisomerization reaction path of PSB11 in gas phase. © 2013 Wiley Periodicals, Inc.