Silicon-Based Integrated Optic Pressure Sensor Using Intermodal Interference between TM-Like and TE-Like Modes

In this paper, a silicon-based integrated optic pressure sensor using an intermodal interference between the fundamental TM-like and TE-like modes is described. The sensor consists of a micromachined rectangular diaphragm and a straight polystyrene optical waveguide passing over the diaphragm. Its sensitivity is theoretically known to be strongly dependent on the position of the waveguide over the diaphragm. To experimentally investigate such dependence, we fabricated a sensor with a 1.2 mm ×10 mm ×20 μm diaphragm, over which waveguides were placed at 50 μm intervals. The measured phase sensitivity was 98 mrad/kPa for the waveguide nearest to the diaphragm edge. The measurement was also carried out for the other waveguides. As theoretically expected, the largest sensitivity was obtained for the waveguide nearest to the edge.     

Rain Attenuation at 103 GHz in Millimeter Wave Ranges

We have conducted a millimeter wave propagation experiment at 103 GHz (2.9 mm) on a propagation path of 390 m. The results were compared with the rain attenuation calculations from the Marshall-Palmer, Best, Joss-Thomas-Waldvogel and Weibull distributions for raindrop-size. It has been shown that the Weibull distribution has a good agreement with the experiments.     

Rain Attenuation at Millimeter and Submillimeter Wavelengths

The rain attenuation was calculated by using the Marshall-Palmer, Best, Joss-Thomas-Waldvogel and Weibull distributions for raindrop-size. The results were compared with the recent measurements from 8 to 312.5 GHz at the rain rate R = 50mm/hr. Especially, the Weibull distribution has a good agreement with the measurements at 312.5 GHz (0.96 mm) in the submillimeter wavelength. Specific attenuation values from 1 to 1000 GHz were calculated for a rain temperature of –10°C, 0°C and 20°C by using the Weibull distribution.     

On Exponential Hedging and Related Quadratic Backward Stochastic Differential Equations

The dual optimization problem for the exponential hedging problem is addressed with a cone constraint. Without boundedness conditions on the terminal payoff and the drift of the Ito-type controlled process, the backward stochastic differential equation, which has a quadratic growth term in the drift, is derived as a necessary and sufficient condition for optimality via a variational method and dynamic programming. Further, solvable situations are given, in which the value and the optimizer are expressed in closed forms with the help of the Clark-Haussmann-Ocone formula.     

Diastereoselective synthesis of new psi[(E)-CH=CMe]- and psi[(Z)-CH=CMe]-type alkene dipeptide isosteres by organocopper reagents and application to conformationally restricted cyclic RGD peptidomimetics

Diastereoselective synthesis of new psi[(E)-CH=CMe]- and psi[(Z)-CH=CMe]-type alkene dipeptide isosteres corresponding to dipeptides having one N-methylamino acid, and application to bioactive peptides, are described. In a key reaction introducing the chiral alpha-alkyl group of the isosteres, organocopper-mediated alkylation of syn-beta-methylated gamma-mesyloxy-alpha,beta-enoate 26a afforded E- and Z-isomers of anti-S(N)2' products in a solvent-dependent manner. The resulting two isosteres, D-Phe-psi[(E)-CH=CMe]-L-Val 27a and D-Phe-psi[(Z)-CH=CMe]-L-Val 28b, which corresponded to trans- and cis-conformers of D-Phe-L-MeVal, respectively, were utilized in a structure-activity relationship study on cyclic RGD peptides 1 and 2, in company with a psi[(E)-CH=CH]-type alkene dipeptide isostere, D-Phe-psi[(E)-CH=CH]-L-Val. The cyclic isostere-containing pseudopeptides 3, 4, and 40 were synthesized and biological activity against integrin alpha(V)beta(3) and alpha(IIb)beta(3) receptors were also evaluated.     

Effect of adsorbed water on the electrorheology of silica suspensions

Monodisperse silica particles were formed by hydrolyzing tetraethylorthosilicate in an ethanol solution and the silica suspensions dispersed in a silicone oil were prepared by a different procedure. The effects of adsorbed water on the electrorheological (ER) behavior were studied under oscillatory shear. The amounts of adsorbed water and surface silanol groups were determined by thermogravimetric analysis. The magnitude of the complex viscosity, |η^*|, increases with the application of electric fields. The physically adsorbed water is primarily responsible for the ER effect. However, the fluids containing large amounts of adsorbed water do not always show excellent ER performance. The surface silanol groups have an important role in promoting the ER effect. Not only the amount but also the situation of silanol groups determines the ER activity of adsorbed water.     

Synthesis and cation-binding properties of poly-and bis(thiacrown ether)s

Poly- and bis(thiacrown ether) derivatives in which some oxygen atoms of benzocrown ether moiety are replaced by sulfur atoms have been synthesized. Their cation-binding abilities were investigated by using the solvent extraction method. The poly- and bis(benzothiacrown ether)s showed great affinity for silver ion, being more excellent in the affinity than the corresponding monocyclic analogs. They, however, possess very poor cation-binding ability for alkali and alkaline-earth metal ions. The poly- and bis(thiacrown ether)s also bind mercuric ions effectively, whereas the corresponding monomeric analogs do not at all.