Mass spectrometric analysis of low molecular mass polyesters by laser desorption/ionization on porous silicon

A low molecular mass polyester was analyzed by desorption/ionization on porous silicon (DIOS) mass spectrometry. The results were compared with those of matrix-assisted laser desorption ionization (MALDI) mass spectrometry using matrixes of alpha-cyano-4-hydroxycinnamic acid (CHCA) and 10,15,20-tetrakis(pentafluorophenyl)porphyrin (F20TPP). The CHCA matrix was not suitable for characterization of low molecular mass components of the polyester because the matrix-related ions interfered with the component ions. On the other hand, the F20TPP matrix showed no interference because no matrix-related ions appeared below m/z 822. However, the solvent selection for determining optimal conditions of sample preparation was limited, because F20TPP does not dissolve readily in any of the available organic solvents. In the DIOS spectra, the polymer ions were observed at high sensitivity without a contaminating ion. No matrix is needed for DIOS spectra of low molecular mass polyesters, facilitating sample preparation and selectivity of a precursor ion in post-source decay measurements.     

Reaction of indium ate complexes with allylic compounds. Controlling SN2/SN2′ selectivity by solvents

Vinyl and methylindium ate complexes (indates) were prepared and both the tendency of immigration and regioselectivity toward cinnamyl bromide were investigated. The vinyl group was more preferably transferred than the Me group, giving a regioisomeric mixture of S_N2 and S_N2′ products. The ratio of S_N2/S_N2′ selectivity can be controlled by solvents; in the presence of polar solvents, such as N-butylpyrrolidone (NBP) and THF, the S_N2′ product was mainly obtained, whereas the S_N2 product was selectively prepared in solutions containing hexane. The vinylindium compound, generated by the reaction of allylic-type diindium reagents with imine, was also converted to the corresponding vinyl indate, which was allowed to react with allyl chloride to give a three-component coupling product.     

Resonance Raman scattering with a forbidden but vibronically allowed electronic transition: Excitation profiles of combinations and overtones of copper tetraphenylporphyrin in the Q-band resonance

Resonance Raman scattering with the Q band of CuTPP shows a peculiar intensity pattern; bands due to combinations and overtones are strong, whereas the corresponding fundamentals are very weak. By a quantitative analysis of excitation profiles, this phenomenon has been fully accounted for on the basis of the vibronic theory of Raman intensities. Vibronic coupling parameters between the Q and B states of CuTPP have been obtained.     

Surprising 1,7-cyclization of vinyl carbonyl ylides generated from reaction of indanetrione with vinyl diazo compounds

Reactions of tricarbonyl compounds with vinyl diazo compounds 2 were carried out. Reaction of 1,2,3-indanetrione with 2a,b,c gave the spiroindan-1,3-dione-2,2′-benzodihydrooxepin 7a,b,c, but not normal products oxirane and dihydrofuran derivatives expected from intermediate vinyl carbonyl ylides 4. Formation of 7 requires isomerization of vinyl carbonyl ylides 4 bearing a (Z)-cyanostyryl group to unstable (E)-form 5 and subsequent cyclization to oxepin 6 followed by a 1,5-hydrogen shift. However, reaction of 2 with six-membered cyclic tricarbonyl compounds 1,2,3-trioxo-2,3-dihydrophenalene 11 and dimethylalloxane 13 gave the dioxole 12 and the dihydrofuran 14, respectively, typical products expected from vinyl carbonyl ylides.     

Determination of sodium and chlorine in pure water by neutron activation analysis

Neutron activation analysis was applied to determine sodium and chlorine in high purity water samples. After irradiation of the sample,³⁸Cl was purified from⁸²Br and other nuclides by carbon tetrachloride extraction and silver chloride precipitation, and²⁴Na was separated from other alkali elements and other nuclides by adsorption of²⁴Na on HAP. The activities of both elements were measured by conventional G.M. counter. The contamination of the elements from container walls during neutron irradiation and the interference with³⁸Ar(n, p)³⁸Cl reaction on argon dissolved in water were also examined. Water samples containing 3 ppb of chlorine could not be determined accurately, owing to the above mentioned interfering reaction.     

Formation and stabilization model of the 42-mer Abeta radical: implications for the long-lasting oxidative stress in Alzheimer's disease

Amyloid fibrils mainly consist of 40-mer and 42-mer peptides (Abeta40, Abeta42). Abeta42 is believed to play a crucial role in the pathogenesis of Alzheimer's disease because its aggregative ability and neurotoxicity are considerably greater than those of Abeta40. The neurotoxicity of Abeta peptides involving the generation of free radicals is closely related to the S-oxidized radical cation of Met-35. However, the cation's origin and mechanism of stabilization remain unclear. Recently, structural models of fibrillar Abeta42 and Abeta40 based on systematic proline replacement have been proposed by our group [Morimoto, A.; et al. J. Biol. Chem. 2004, 279, 52781] and Wetzel's group [Williams, A. D.; et al. J. Mol. Biol. 2004, 335, 833], respectively. A major difference between these models is that our model of Abeta42 has a C-terminal beta-sheet region. Our biophysical study on Abeta42 using electron spin resonance (ESR) suggests that the S-oxidized radical cation of Met-35 could be generated by the reduction of the tyrosyl radical at Tyr-10 through a turn structure at positions 22 and 23, and stabilized by a C-terminal carboxylate anion through an intramolecular beta-sheet at positions 35-37 and 40-42 to form a C-terminal core that would lead to aggregation. A time-course analysis of the generation of radicals using ESR suggests that stabilization of the radicals by aggregation might be a main reason for the long-lasting oxidative stress of Abeta42. In contrast, the S-oxidized radical cation of Abeta40 is too short-lived to induce potent neurotoxicity because no such stabilization of radicals occurs in Abeta40.     

LIGHT INDUCED FLUORESCENCE SPECTRAL CHANGES IN NATIVE PHYTOCHROME FROM Secale cereale L. AT LIQUID NITROGEN TEMPERATURE

Abstract— Fluorescence spectra of native rye phytochrome were determined under different light conditions at liquid nitrogen temperature. Fluorescence spectrum of the red-light-absorbing form (Pr) had a major peak at about 685 nm (14 600 cm⁻¹) and a broad sub-peak at about 515 nm (19 400 cm⁻¹). The peak height at 685 nm was reduced by irradiation with monochromatic light of 640 nm, and a new peak became obvious at about 702 nm (14250 cm⁻¹). This spectral change was almost completely reversed by subsequent irradiation with 700-nm light. Fluorescence spectrum of the photoequilibrium mixture of Pr and far-red-light absorbing form under continuous red light showed a sharp peak at about 685 nm having a peak height ca. 12% of Pr, and a broad sub-peak at about 508 nm (19 700 cm⁻¹). Light of 730 nm did not reduce the peak height at about 685 nm but induced a new shoulder at about 699 nm (14300 cm⁻¹). Monochromatic light of 640 and 700 nm given following the light of 730 nm could not reverse the spectral change at 699 nm induced by the irradiation with 730-nm light. Fluorescence spectrum of Pr in partially degraded phytochrome was similar to that in native phytochrome but the peak position in the red region was shifted by about 5 nm (100 cm⁻¹) to the blue.     

Electroreductive synthesis of 1-(bromobenzyl)-isoquinoline derivatives and its application to cularine synthesis

Electrochemical reduction of immonium salts in the presence of bromobenzylbromide derivatives gave 1-(bromobenzyl)-isoquinoline derivatives in moderate yields. This reaction is useful in the synthesis of several natural alkaloids as exemplified in the synthesis of Cularine.     

Formulation study for lansoprazole fast-disintegrating tablet. II. Effect of triethyl citrate on the quality of the products

The purpose of this study was to develop enteric-coated microgranules for the lansoprazole fast-disintegrating tablet (LFDT), which is a rapidly disintegrating tablet containing enteric-coated microgranules. In our previous study, it was clarified that sufficient flexibility of the enteric layer was achieved by the optimized combined ratio of methacrylic acid copolymer dispersion to ethyl acrylate-methyl methacrylate copolymer dispersion and adding the optimized concentration of triethyl citrate to reduce the damage during the compression process. However, since triethyl citrate has an unpleasant bitter taste and is especially incompatible with lansoprazole, it adversely affects the taste and stability of lansoprazole in the enteric-coated microgranules. The enteric layer containing macrogol 6000 was proven useful to improve the unpleasant bitter taste and stability of lansoprazole, because macrogol 6000 does not have an unpleasant bitter taste and is more compatible than triethyl citerate. By covering the inner (first enteric layer) and outer side (third enteric layer) of the enteric layer containing triethyl citrate (second enteric layer) with the enteric layer containing macrogol 6000, we resolved the stability problem of lansoprazole and the unpleasant bitter taste. Finally, we developed enteric-coated microgranules comprising seven layers: 1) core, 2) active compound layer, 3) intermediate layer, 4) first enteric layer, 5) second enteric layer, 6) third enteric layer, and 7) over coating layer. The enteric-coated microgranules have the multiple functions of reducing the damage to the enteric layer during the compression process, improving the stability of lansoprazole, and masking the unpleasant bitter taste.