Addition–fragmentation chain transfer: Molecular weight distributions and retardation in the system methyl methacrylate/methyl α‐(bromomethyl)acrylate

A detailed investigation of addition–fragmentation chain transfer (AFCT) in the free‐radical polymerization of methyl methacrylate (MMA) in the presence of methyl α‐(bromomethyl)acrylate (MBMA) was carried out to elucidate mechanistic details with efficient macromonomer synthesis as an underlying goal. Advanced modeling techniques were used in connection with the experimental work. Curve fitting of simulated and experimental molecular weight distributions with respect to the rate coefficient for addition of propagating radicals to MBMA (k_add) over 60–120 °C resulted in E_add = 21.7 kJ mol^?1 and A_add = 2.18 × 10⁶ M^?1 s^?1 and a very weak temperature dependence of the chain‐transfer constant (E_add ≈ E_p). The rate coefficient for fragmentation of adduct radicals at 60 °C was estimated as k_f ≈ 39 s^?1 on the basis of experimental data of the MMA conversion and the concentration of 2‐carbomethoxy‐2‐propenyl end groups. The approach developed is generic and can be applied to any AFCT system in which copolymerization does not occur and in which the resulting unsaturated end groups do not undergo further reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2640–2650, 2004     

Basic study of the gelation of dimethacrylate‐type crosslinking agents

An investigation was made of the gelation of dimethacrylate‐type crosslinking agents in view of an application for separation media. The study mainly centered on a crosslinking agent, glycerol dimethacrylate (GDMA), which is relatively hydrophilic because of a hydroxyl group in the middle of its structure. The gelation of GDMA was compared with that of other hydrophobic crosslinking agents such as ethylene glycol dimethacrylate and 1,6‐hexanediol dimethacrylate. The diluents used in the study were toluene, toluene with methanol, and cyclohexanol. The gelation was observed in real time with a charge coupled device camera and dynamic light scattering (DLS). Also, the separated dry gels were extensively characterized with scanning electron microscopy, BET (N₂ absorption and desorption isotherm), and Fourier transform infrared. DLS analysis showed a stronger molecular interaction of GDMA gelation in toluene, whereas this interaction was much weaker in an alcoholic solvent such as toluene with methanol or cyclohexanol. This indicated that GDMA gelation might proceed through hydrogen bonding as well as a crosslinking reaction of vinyl groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 949–958, 2006     

Changeable reactivity of ketyl radicals derived from 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones depending on electron transfer conditions employed

Photoinduced electron transfer reaction of 2-bromomethyl-2-(3-butenyl)benzocyclic-1-alkanones with amines afforded 5-exo radical cyclization products while electron transfer reaction with samarium diiodide produced cyclopropanols.     

Highly Selective Separation of Rhodopsin from Bovine Rod Outer Segment Membranes Using Combination of Divalent Cation and Alkyl(thio)glucoside

The micellization process of bovine rod outer segment (ROS) membranes is investigated utilizing a series of neutral detergents. It is found that when alkyl(thio)glucosides with an appropriate hydrophilic–lipophilic balance (e.g. octylthioglucoside) are used in combination with a divalent cation, rhodopsin is selectively extracted from ROS membranes at a specific detergent-to-membrane ratio. This allows remarkable purification of rhodopsin by a single-step solubilization, because the residual membranes are heavily aggregated in the presence of divalent cation and are therefore easily sedimented by low-speed centrifugation. The absorption spectrum of the supernatant reproducibly exhibits an A₂₈₀/A₅₀₀ value of 1.6, an excellent value that could rarely be obtained by chromatographic purification. The degree of purification also depends on the type of divalent cation included in the solubilization solution; specific binding of IIB-series cations (Zn²⁺ and Cd²⁺) to ROS membranes is suggested to play an important role in the solubilization process. The present result represents a unique example of selective solubilization of a specific membrane protein from highly aggregated membranes.     

Coating and water permeation properties of SiO2 thin films prepared by the sol-gel method on nylon-6 substrates

Nylon-6 substrates were coated with SiO₂ thin films by the sol-gel method and their water permeability coefficient was evaluated. Methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS) were used as starting materials. The addition of MTES to TEOS has enabled the formation of crack-free thin films on the substrates. The thin films strongly adhered to the substrates. The water permeability coefficients of nylon-6 substrates coated with these thin films decreased with the increase in the ratio of TEOS to the total alkoxides. The pretreatment of the nylon-6 substrates with -aminopropyltriethoxysilane was found to be effective to suppress the water permeability. The water permeability was suppressed by about 40% under the optimal condition.     

Selective foam separation of binary protein solution by SDS complexation method

A fundamental study about the selective foam separation of protein mixture was carried out. A solution containing two proteins, ovalbumin (OA) and lysozyme (LZ), and an anionic surfactant, sodium dodecyl sulfate (SDS), was adjusted to pH 6.0, which referred to an intermediate state between the isoelectric points of the proteins. The solution was processed by continuous foam separation. The results showed that a proper addition of SDS greatly improved the selective recovery of LZ to OA. The experimental data were well explained by a simple model that most of cationic protein molecules (LZ) are associated with SDS and the adsorption of all the species including LZ-SDS complexes are subjected to Langmuir adsorption isotherm. The results also showed that one of the Langmuir parameters, which means a kind of lyophillic property of adsorbed material, of LZ-SDS complexes was extremely large as compared with that of primary protein.     

Phase Separation in Sol-Gel System Containing Mixture of 3- and 4-Functional Alkoxysilanes

The phase separation behavior of gelling systems containing the mixture of 3-functional and 4-functional alkoxysilanes has been investigated. The relation between the starting composition and resultant macroporous morphology was examined using tetramethoxysilane (TMOS) and vinyltrimethoxysilane (VTMS) as starting alkoxysilanes, formamide (FA) as an additive, under an acidic condition. Up to TMOS:VTMS molar ratio of 0.5:0.5, the phase relation remained almost unchanged from that of pure TMOS system which exhibits morphology with well-defined co-continuous macropores in a very limited concentration region. On the VTMS-rich side typically TMOS:VTMS = 0.2:0.8, however, the co-continuous macroporous morphology was obtained in a broader composition range than those of either pure TMOS or VTMS system. A dome-like pseudo binary region was obtained with the two-phase region extending toward FA-rich direction. The domain size and pore volume of the gels with macroporous morphology could be controlled by alkoxide:water ratio and total solvent fraction, respectively.