Mass spectra of perfluoroalkyl and perfluoroalkylether nitriles and acyl halides

Electron impact fragmentation patterns were obtained for perfluoroalkylether nitriles, C,F,O[CF(CF₃)CFIO]ICF(CF₃)CN (x = 1 and 2), perfluoroalkylether acyl halides, CSF,OCF(CF,)-CF₂OCF(CF₃)COX (X = F and Cl), n-perfluorooctanonitrile and n-perfiuorooctanoyl chloride. The perfluoroalkyl and perfluoroalkylether nitriles afforded ions characteristic of the nitrile function. The major fragment from the acyl chlorides was the [COClJ]+ ion; the presence of chlorine was evidenced also by rearrangement ions of the general form [R_fCl] t. The perfluoroalkylether compounds appeared to undergo a typical fragmentation governed by the cleavage of the carbon-oxygen bond.     

Adsorption of oligooxypropylenated amines at the aqueous solution—air interface: Homologous series of piperidine and morpholine derivatives

The surface tension isotherms for pure oligooxypropylenated piperidine and morpholine at the aqueous solution—air interface were determined and interpreted. The surface excess concentration, Γ, the surface area per molecule, A, and the standard free energy of adsorption, ΔG°, were calculated according to a new empirical adsorption equation. The standard free energy contribution for the oxypropylene group (PO) in morpholine derivatives,ΔG° (PO) = −3.34 kJ mol⁻¹, is substantially lower than that for the PO group located in the piperidine derivatives, i.e. ΔG° (PO)= −3.12 kJ mol⁻¹.     

Ion-Molecule reactions in methylamine and dimethylamine and trimethylamine systems

Fourier transform ion cyclotron resonance mass spectrometry has been used to measure the reaction rates for ions derived from methylamine with dimethylamine or trimethylamine. The use of the selective ion ejection technique greatly simplifies the elucidation of the ion-molecule reaction channels. The rate constants for proton transfer from protonated metwlamine, CH₃NH ₃ ⁺ (m/z 32), to dimethylamine and trimethylamine are 16.1 ± 1.6 × 10^?10 and 9.3 ± 0.9 × 10^?10 cm³ molec^?1s^?1, respectively. The rate constants for charge transfer from methylamine molecular ion, CH₃NH ₂ ⁺ (m/z 31), to dimethylamine and trimethylamine are 9.3 ± 1.8 x 10^?10 and 15.0 ± 5 × 10^?10 cm³molec^?1s^?1, respectively.     

The kinetics of oxiranes addition to bis/2-hydroxyalkyl/disulfides and bis/2-hydroxyalkyl/sulfides in the presence of N,N-dimethylcyclohexylamine

Rate constants for the reaction of oxiranes with bis/2-hydroxyalkyl/disulfides, bis/2-Hydroxyalkyl/sulfides, and 1,6-Hexanediol in the presence of N,N-dimethylcyclohexylamine were studied at the temperature range of 50–90°C. A mechanism of these reactions has been proposed and its kinetic equation has been presented.     

Enhanced fatigue performance of porous coated Ti6Al4V biomedical alloy

Biofunctional coatings are necessary to improve integration of titanium implants in the host tissue but they may be detrimental for the implant fatigue properties. This study presents an attempt towards enhancement of the in vitro fatigue strength of plasma electrolytic oxidation coated Ti6Al4V alloy by applying shot peening process prior to coating. The electrolytic oxidation was performed in calcium acetate and calcium glycerophosphate electrolytes that allowed formation of porous oxide coatings with high surface free energy and apatite like ability. A deformed surface layer coupled with induced residual compressive stresses seem to affect oxide growth rate and fatigue behavior of the titanium alloy.     

Formulation of Environmentally Safe Graffiti Remover Containing Esterified Plant Oils and Sugar Surfactant

The removal of graffiti or over-painting requires special attention in order to not induce the surface destruction but to also address all of the important eco-compatibility concerns. Because of the necessity to avoid the use of volatile and toxic petroleum-based solvents that are common in cleaning formulations, much attention has recently been paid to the design of a variety of sustainable formulations that are based on biodegradable raw materials. In the present contribution we propose a new approach to graffiti cleaning formulations that are composed of newly synthesized green solvents such as esterified plant oils, i.e., rapeseed oil (RO), sunflower oil (SO), or used cooking oil (UCO), ethyl lactate (EL), and alkylpolyglucosides (APGs) as surfactants. Oil PEG-8 ester solvents were synthesized through the direct esterification/transesterification of these oils using monobutyltin(IV) tris(2-ethylhexanoate) and titanium(IV) butoxide catalysts under mild process conditions. The most efficient formulations, determined by optimization through the response surface methodology (RSM) was more effective in comparison to the reference solvents such as the so-called Nitro solvent (denoting a mixture of toluene and acetone) and petroleum ether. Additionally, the optimal product was found to be effective in removing graffiti from glass, metal, or sandstone surfaces under open-field conditions in the city of Wrocław. The performed studies could be an invaluable tool for developing future green formulations for graffiti removal.     

Surface-active, micellar, and antielectrostatic properties of bis-ammonium salts

A series of new cationic surfactants, bis-quaternary ammonium dibromides, were synthesized. The properties of these surfactants were characterized by surface tension measurements, conductivity study, and dynamic light scattering. The surface properties, such as surface excess concentration, Gamma(cmc), surface area demand per molecule, A(min), efficiency in surface tension reduction, pC(20), the effectiveness of surface tension reduction, gamma(min), critical micelle concentration, cmc, and standard free energy of micellization, DeltaG(mic)(0) and DeltaG(ads)(0), were obtained by means of surface tension measurements. The antielectrostatic properties were investigated by measuring the surface resistance, the half-charge decay time, and the maximum voltage induced on polyethylene films and propylene unwoven fabrics. Critical micellar concentrations (cmc) of investigated salts were much lower than those of the monomeric salt DTAC. The results obtained in this work were compared to analogous bis-quaternary ammonium dichlorides and well-known gemini cationic surfactants. It was found that the type of counterion had an impact on the values of the micelle ionization degree and the hydrodynamic diameters. Larger aggregates were found for bis-quaternary ammonium dibromides, which had smaller values of the ionization micelle degree than bis-quaternary ammonium dichlorides. Moreover, the antielectrostatic effect strongly depended on the kind of counterion. All investigated salts had very good antistatic properties.     

Mechanism of the formation of peripheral coarse grain structure in hot extrusion of Al-4.5Zn-1Mg

Microstructural evolution leading to peripheral coarse grain (PCG) structure in hot extruded Al-4.5Zn-1Mg rods is investigated. The extent of dynamic recrystallization (DRX) in the as-extruded product falls not in line with the basis over which the existing mechanisms for interpretation of PCG formation are built. A new mechanism is therefore proposed based on partial DRX during extrusion and nucleation and abnormal growth of statically recrsystallised grains.     

O-Trimethylsilylenol ethers as versatile building blocks in a modular preparation of polyenic backbone

Versatility and synthetic potential of 1-(trimethylsilyloxy)-1,3-butadiene, 1-(trimethylsilyloxy)penta-1,3-diene, and their methyl substituted derivatives have been demonstrated in a modular synthetic methodology of stereodefined π-conjugated unsymmetrical, symmetrical two-dimensional, and octupolar polyenal structure.     

Comparative study on camphor enantiomers behavior under the conditions of gas-liquid chromatography and reversed-phase high-performance liquid chromatography systems modified with alpha- and beta-cyclodextrins

The dependence of retention and selectivity parameters of camphor enantiomers on the concentration of alpha- and beta-cyclodextrins were studied under conditions of GLC (matrix solvent: Glycerol, 95 degrees C) and RP-HPLC (matrix solvent: Aqueous methanolic, 20 degrees C). It has been found that beta-cyclodextrin forms complex of 1:1 stoichiometry and does not recognize enantiomers of camphor. In contrast alpha-CD forming complexes of 1:2 stoichiometry appeared to be very efficient chiral selector of (+) and (-)-camphor. Relatively considerable differences have been observed between stability constants determined by GLC and RP-HPLC, what may be explained by the various natures of the matrix solvents and the various temperatures of the measurements. On the contrary, the enantioseparation factor alpha observed at higher concentrations of alpha-cyclodextrin stabilizes on the very similar value alpha+/-(GLC) approximately = alpha-/+(HPLC) approximately = 1.6. Simple theoretical considerations focusing on the differences in the mechanisms of the studied processes have been performed. According to them the enantiomer forming the more stable complex with the cyclodextrin should be eluted from the RP-HPLC column first and GLC column last. This fact has been confirmed experimentally.