Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

A biochemical sniffer-chip for convenient analysis of gaseous formaldehyde from timber materials

A biochemical gas-sensor (sniffer-chip) with formaldehyde dehydrogenase (FALDH) was developed for convenient analysis of gaseous formaldehyde with high gas-selectivity. The sniffer-chip for formaldehyde in the gas phase was constructed by immobilizing FALDH to a Pt-electrode coated hydrophilic PTFE membrane. The oxidation current of NADH produced by the enzymatic reactions was measured by amperometric analysis. The calibration range of the sniffer-chip for formaldehyde in the gas phase was from 40 to 2000 ppb, which encountered the maximum permissible concentration of formaldehyde vapor in the residential house (80 ppb) and formaldehyde detection limit for the human sense of smell (410 ppb). As the resident-environmental application, the sniffer-chip was possible to measure the formaldehyde concentration from some timber materials (3 kinds of interior timber and 2 kinds of exterior formwork timber) within 3 min. The calculated concentration value by a regression analysis was consistent with those of a commercially available gas sensor and a gas detector tube for formaldehyde. The FALDH sniffer-tip would be effective and convenient approach to detect and measure gaseous formaldehyde with high gas-selectivity at the residential atmosphere. Correspondence: Kohji Mitsubayashi, Department of Biomedical Devices and Instrumentation, Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University, 2-3-10 Kanda-Surugadai, Chiyoda-ku, Tokyo 101-0062, Japan     

Bio-sniffers for ethanol and acetaldehyde using carbon and Ag/AgCl coated electrodes

Monitoring of ethanol and acetaldehyde in expired gas after drinking is an effective method for assessment of alcohol metabolic function. We have developed bioelectronic gas sensors (bio-sniffers) for convenient measurement of ethanol and acetaldehyde. The bio-sniffers were fabricated using a simple process and inexpensive method. The process consisted of coating carbon and Ag/AgCl on a filter paper using screen-printing, and immobilizing alcohol oxidase and aldehyde dehydrogenase on the carbon electrode. These bio-sniffers showed good response to ethanol and acetaldehyde vapor and were used to sense these vapors in the concentration range 1.0 to 100 ppm and 0.2 to 4.0 ppm, respectively. The calibration ranges cover the alcohol and acetaldehyde concentration in breath air after drinking. The bio-sniffer for acetaldehyde is applicable also to evaluate other aldehydes (i.e. formaldehyde as volatile organic compounds).