Nitric oxide concentration measurements in atmospheric pressure flames using electronic-resonance-enhanced coherent anti-Stokes Raman scattering

We report the application of electronic-resonance-enhanced coherent anti-Stokes Raman scattering (ERE-CARS) for measurements of nitric oxide concentration ([NO]) in three different atmospheric pressure flames. Visible pump (532 nm) and Stokes (591 nm) beams are used to probe the Q-branch of the Raman transition. A significant resonance enhancement is obtained by tuning an ultraviolet probe beam (236 nm) into resonance with specific rotational transitions in the (v’=0, v”=1) vibrational band of the A²Σ⁺–X²Π electronic system of NO. ERE-CARS spectra are recorded at various heights within a hydrogen-air flame producing relatively low concentrations of NO over a Hencken burner. Good agreement is obtained between NO ERE-CARS measurements and the results of flame computations using UNICORN, a two-dimensional flame code. Excellent agreement between measured and calculated NO spectra is also obtained when using a modified version of the Sandia CARSFT code for heavily sooting acetylene-air flames (φ=0.8 to φ=1.6) on the same Hencken burner. Finally, NO concentration profiles are measured using ERE-CARS in a laminar, counter-flow, non-premixed hydrogen-air flame. Spectral scans are recorded by probing the Q₁ (9.5), Q₁ (13.5) and Q₁ (17.5) Raman transitions. The measured shape of the [NO] profile is in good agreement with that predicted using the OPPDIF code, even without correcting for collisional effects. These comparisons between [NO] measurements and predictions establish the utility of ERE-CARS for detection of NO in flames with large temperature and concentration gradients as well as in sooting environments. PACS 07.88.+y; 42.62.Fi; 42.65.Dr     

An efficient, rapid and regioselective nuclear bromination of aromatics and heteroaromatics with NBS using sulfonic-acid-functionalized silica as a heterogeneous recyclable catalyst

A simple, efficient and rapid method has been developed for high-yielding regioselective nuclear monobromination of aromatic and heteroaromatic compounds using NBS in the presence of sulfonic-acid-functionalized silica at room temperature. The catalyst works under heterogeneous conditions and can be recycled.     

Structure of propagating edge diffusion flames in hydrocarbon fuel jets

Direct numerical simulations with a C₃-chemistry model have been performed to investigate the transient behavior and internal structure of flames propagating in an axisymmetric fuel jet of methane, ethane, ethylene, acetylene, or propane in normal earth gravity (1g) and zero gravity (0g). The fuel issued from a 3-mm-i.d. tube into quasi-quiescent air for a fixed mixing time of 0.3 s before it was ignited along the centerline where the fuel–air mixture was at stoichiometry. The edge of the flame formed a vigorously burning peak reactivity spot, i.e., reaction kernel, and propagated through a flammable mixture layer, leaving behind a trailing diffusion flame. The reaction kernel broadened laterally across the flammable mixture layer and possessed characteristics of premixed flames in the direction of propagation and unique flame structure in the transverse direction. The reaction kernel grew wings on both fuel and air sides to form a triple-flame-like structure, particularly for ethylene and acetylene, whereas for alkanes, the fuel-rich wing tended to merge with the main diffusion flame zone, particularly methane. The topology of edge diffusion flames depend on the properties of fuels, particularly the rich flammability limit, and the mechanistic oxidation pathways. The transit velocity of edge diffusion flames, determined from a time series of calculated temperature field, equaled to the measured laminar flame speed of the stoichiometric fuel–air mixtures, available in the literature, independent of the gravity level.     

Unwanted combustion enhancement by C6F12O fire suppressant

Several agents are under consideration to replace CF₃Br for use in suppressing fires in aircraft cargo bays. In a Federal Aviation Administration (FAA) performance test simulating the explosion of an aerosol can, however, the replacements, when added at sub-inerting concentrations, have all been found to create higher pressure rise than with no agent, hence failing the test. Thermodynamic equilibrium calculations as well as perfectly-stirred reactor (PSR) simulations with detailed reaction kinetics, are performed for one of these agents, C₆F₁₂O (Novec 1230), to understand the reasons for the unexpected enhanced combustion rather than suppression. The high pressure rise with added agent is shown to depend on the amount of agent, and can only occur if a large fraction of the available oxidizer in the chamber is consumed, corresponding to stoichiometric proportions of fuel, oxygen, and agent. A kinetic model for the reaction of C₆F₁₂O in hydrocarbon–air flames has been developed. Stirred-reactor simulations predict that at higher agent loadings, the inhibition effectiveness of C₆F₁₂O is relatively insensitive to the overall stoichiometry, and the marginal inhibitory effect of the agent is greatly reduced, so that the mixture remains flammable over a wide range of conditions corresponding to those of the FAA test. The present findings are consistent with and support the earlier analyses for C₂HF₅ and CF₃Br, which were also evaluated in the FAA test.     

Palladium‐catalysed room‐temperature Suzuki–Miyaura coupling in water extract of pomegranate ash,a bio‐derived sustainable and renewable medium

An agro waste‐derived, ‘water extract of pomegranate ash’ (WEPA), has been utilized for the first time as a renewable medium for Pd(OAc)₂‐catalysed Suzuki–Miyaura cross‐coupling at room temperature. This method offers a simple and sustainable synthesis of biaryls from aryl halides and arylboronic acids under ligand‐ and external base‐free aerobic and ambient conditions. This method has been found effective for both activated and unactivated aryl halides in the production of biaryls with moderate to nearly quantitative yields. The protocol shows high chemoselectivity over identical/similar reactive sites in aryl halides (i.e. selectivity over identical halogens or different halogens of aryl halides). This method exhibits high regioselectivity, i.e. the selective reactivity of a halogen over other identical halogens at different positions on the aromatic nucleus. Therefore, we disclose here a clean, benign, substantial chemo‐ and regioselective and highly economic alternative method for the palladium‐assisted synthesis of biaryls using an agro waste‐derived medium.     

Highly efficient metal-free one-pot synthesis of α-aminophosphonates through reduction followed by Kabachnik–fields reaction using three-component system

One-pot synthesis of α-aminophosphonates directly from aryl nitro compounds, aldehydes/ketones, and diethyl phosphite using sodium dithionite through reduction and followed by Kabachnik–Fields reaction under metal-free conditions is reported. The major advantages are excellent yield, high chemoselectivity, neutral reaction medium, and simple experimental procedure. This methodology consists of the following steps: 1) amine formation from nitro compound, 2) imine formation from amine and aldehyde/ketone, 3) phosphate addition to imine.     

Soot studies of laminar diffusion flames with recirculation zones

This paper describes the unusual sooting structure of three flames established by the laminar recirculation zones of a centerbody burner. The vertically mounted burner consists of an annular air jet and a central fuel jet separated by a bluff-body. The three ethylene fueled flames are identified as: fully sooting, donut-shape, and ring-shape sooting flames. Different shapes of the soot structures are obtained by varying the N₂ dilution in the fuel and air jets while maintaining a constant air and fuel velocity of 1.2 m/s. All three flames have the unusual characteristic that the soot, entrained into the recirculation zone, follows discrete spiral trajectories that terminate at the center of the vortex. The questions are what cause: (1) the unusual sooting structures and (2) the spiral trajectories of the soot? Flame photographs, laser sheet visualizations, and calculations with a 2D CFD-based code (UNICORN) are used to answer these questions. The different sooting structures are related to the spiral transport of the soot, the spatial location of the stoichiometric flame surface with respect to the vortex center, and the burnout of the soot particles. Computations indicate that the spiral trajectories of the soot particles are due to thermophoresis.     

A problem in enumerating extreme points, and an efficient algorithm for one class of polytopes

We consider the problem of developing an efficient algorithm for enumerating the extreme points of a convex polytope specified by linear constraints. Murty and Chung (Math Program 70:27–45, 1995) introduced the concept of a segment of a polytope, and used it to develop some steps for carrying out the enumeration efficiently until the convex hull of the set of known extreme points becomes a segment. That effort stops with a segment, other steps outlined in Murty and Chung (Math Program 70:27–45, 1995) for carrying out the enumeration after reaching a segment, or for checking whether the segment is equal to the original polytope, do not constitute an efficient algorithm. Here we describe the central problem in carrying out the enumeration efficiently after reaching a segment. We then discuss two procedures for enumerating extreme points, the mukkadvayam checking procedure, and the nearest point procedure. We divide polytopes into two classes: Class 1 polytopes have at least one extreme point satisfying the property that there is a hyperplane H through that extreme point such that every facet of the polytope incident at that extreme point has relative interior point intersections with both sides of H; Class 2 polytopes have the property that every hyperplane through any extreme point has at least one facet incident at that extreme point completely contained on one of its sides. We then prove that the procedures developed solve the problem efficiently when the polytope belongs to Class 2.     

Porphyrin N-Pincer Pd(II)-Complexes in Water: A Base-Free and Nature-Inspired Protocol for the Oxidative Self-Coupling of Potassium Aryltrifluoroborates in Open-Air

Metalloporphyrins (and porphyrins) are well known as pigments of life in nature, since representatives of this group include chlorophylls (Mg-porphyrins) and heme (Fe-porphyrins). Hence, the construction of chemistry based on these substances can be based on the imitation of biological systems. Inspired by nature, in this article we present the preparation of five different porphyrin, meso-tetraphenylporphyrin (TPP), meso-tetra(p-anisyl)porphyrin (TpAP), tetrasodium meso-tetra(p-sulfonatophenyl)porphyrin (TSTpSPP), meso-tetra(m-hydroxyphenyl)porphyrin (TmHPP), and meso-tetra(m-carboxyphenyl)porphyrin (TmCPP) as well as their N-pincer Pd(II)-complexes such as Pd(II)-meso-tetraphenylporphyrin (PdTPP), Pd(II)-meso-tetra(p-anisyl)porphyrin (PdTpAP), Pd(II)-tetrasodium meso-tetra(p-sulfonatophenyl)porphyrin (PdTSTpSPP), Pd(II)-meso-tetra(m-hydroxyphenyl)porphyrin (PdTmHPP), and Pd(II)-meso-tetra(m-carboxyphenyl)porphyrin (PdTmCPP). These porphyrin N-pincer Pd(II)-complexes were studied and found to be effective in the base-free self-coupling reactions of potassium aryltrifluoroborates (PATFBs) in water at ambient conditions. The catalysts and the products (symmetrical biaryls) were characterized using their spectral data. The high yields of the biaryls, the bio-mimicking conditions, good substrate feasibility, evading the use of base, easy preparation and handling of catalysts, and the application of aqueous media, all make this protocol very attractive from a sustainability and cost-effective standpoint.     

Zirconyl nitrate mediated regioselective ring opening of epoxides and aziridines: an easy synthesis of β-nitrato-alcohols and -sulfonamides

Epoxides and aziridines are cleaved efficiently and regioselectively in the presence of zirconyl nitrate at room temperature to afford the corresponding β-nitrato-alcohols and -sulfonamides, respectively, in high yields.