Functionalization of polyethylene/silane copolymers in posttreatment reactions

7‐Octenyldimethylphenylsilane was copolymerized with ethylene via Et(Ind)₂ZrCl₂ methylaluminoxane catalyst system without loss of catalyst activity or decrease in molar mass. The comonomer contents in the polymer samples were at a level of 0.15–1.0 mol % and the reactive phenylsilane groups were posttreated to different alcoxy‐ and halosilane groups, for example, Si? F, Si? Cl, Si? OCH₃, and Si? OCH₂CH₃. The posttreatment reactions had no major effect on the molar masses or on the thermal properties (measured with differential scanning calorimetry) of the copolymers. The reaction pathways were nearly independent of the comonomer contents and the reactions reached 70–100% conversions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1461–1467, 2004     

Assessment of labelled products with different radioanalytical methods: study on 18F-fluorination reaction of 4-[18F]fluoro-N-[2-[1-(2-methoxyphenyl)-1-piperazinyl]ethyl-N-2-pyridinyl-benzamide (p-[18F]MPPF)

The serotonin receptor 5-HT_1A ligand 4-[¹⁸F]fluoro-N-[2-[1-(2-methoxyphenyl)-1-piperazinyl]ethyl-N-2-pyridinyl-benzamide (p-[¹⁸F]MPPF) was produced by a simplified method of Le Bars et al. Traditional oil bath heating was compared to microwave heating. Various radioanalytical methods, radio-Thin Layer Chromatography (TLC), High Pressure Liquid Chromatography (HPLC) and Mass Spectrometry (MS), were compared in the evaluation of the labelled product(s). The crude reaction mixture consisted of p-[¹⁸F]MPPF and 2–4 radioactive by-products eluting after the product fraction, and the reverse-phase HPLC method failed occasionally to separate p-[¹⁸F]MPPF from the radioactive by-product with close retention time. The heating method had no significant effect on the composition of labelled by-products. In LC-(ESI)-MS analysis of p-[¹⁸F]MPPF the labelled product was identified with m/z ratio of 435 ([M + H⁺]). The other HPLC fractions were measured to have following m/z ratios: (1) 327; 349; (675) (2) 402; 407/408; (791) and (3) 436, suggesting different kind of decomposition of the labelled product and/or the inactive precursor. The ion trap mass spectrometer was sufficient for the qualitative analysis of p-[¹⁸F]MPPF. However, differentiation of by-products arising from the decomposition of p-[¹⁸F]MPPF or from its precursor p-MPPNO₂ proved to be challenging.     

7‐(2‐Oxoalkoxy)coumarins: Synthesis and Anti‐Inflammatory Activity of a Series of Substituted Coumarins

A series of 7‐(2‐oxoalkoxy)coumarins have been synthesized by conjugating substituted 7‐hydroxycoumarins with different chloroketones. The anti‐inflammatory properties of 7‐(2‐oxoalkoxy)coumarins were studied in LPS‐induced inflammatory response in J774 macrophages. Western blot was used to determine the expression of iNOS and COX‐2, NO was determined by measuring its metabolite nitrite by Griess reaction and IL‐6 was measured by ELISA. Seventeen of the studied compounds inhibited NO and IL‐6 production over 50% at 100 μM concentrations. IC₅₀ values of the best inhibitors were 21 μM/24 μM (NO/IL‐6) for compound 12 and 30 μM/10 μM (NO/IL‐6) for compound 20 . The main result was that the substitution with 7‐(2‐oxoalkoxy) group improved the anti‐inflammatory properties of most of the investigated 7‐hydroxycoumarins.     

Ethylene/silane copolymers prepared with a metallocene catalyst as polymeric additives in polyethylene/aluminum trihydroxide composites

Metallocene catalyst based polyethylene‐co‐7‐octenyldimethyl phenyl silane (PE/Si? Ph ) and its post‐treated functional forms PE/Si? X ( X = Cl , F , OCH₃ , OCH₂CH₃ ) were used as additives in PE/ATH composites. The impact strength of the composites was significantly increased after a small addition (0.5–3.0 wt %) of the functionalized form of the copolymer (PE/Si? X ). The thermal study of the composites gave us more information about the additive's behavior at the filler/matrix interphase and correlation to the mechanical properties was found. According to this thermal data, the original untreated form of PE/Si? Ph also seemed to interact weakly with the ATH‐filler particles, which was seen in an altered interphase at the filler/matrix boundary layer. The interaction was not strong enough to improve the impact strength of composites but an increase was observed in some other mechanical properties (tensile stress, yield strain). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5597–5608, 2005     

Preparation and properties of cellulose/PE-co-AA blends

Cellulose/polyethylene-co-acrylic acid blends (cellulose concentration 0–50 wt.%) was prepared via mixing their alkaline solutions. The formed suspension was precipitated and dried, where after the morphology as well the thermal and mechanical properties of the blends were characterized by Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), and Dynamic Mechanical Analyses (DMA). In addition, the melt properties of the blend were studied by rotational rheometer following some injection molding trials as well. The polymers were found to be dispersed homogenously in the blend and the crystallization temperature of the PE-co-AA phase was increased ～6 °C due to the nucleation ability of the cellulose phase. The size of the discontinuous cellulose phase was 5 μm at the most while at higher cellulose concentrations (30–50 wt.%) the polymers formed co-continuous morphology in the blend. This change in the morphology was observed also in their melt properties which showed that the blend reached so called percolation point at ～20 wt.% of cellulose. Finally, the blends were found to be injection moldable over the whole composition range, if only the injection molding became more challenging (i.e. higher mold temperatures and longer mold cooling times were required) after the percholation point.     

Phenylsilane; unreactive group in the metallocene/MAO catalyzed copolymerization of propylene and 7-octenyldimethylphenylsilane, reactive group in melt blending with microsilica filler

In this study, 7-octenyldimethylphenylsilane (7-SiPh) was copolymerized with propylene using Me₂Si(2-Me-4-Ph-1-indenyl)₂ZrCl₂/MAO as a catalyst. The copolymerization behaviour of the silicon-containing monomer, 7-SiPh, was compared with that of 1-dodecene, which is known to be incorporated in polypropylene (PP) using metallocenes. Both comonomers were well incorporated and randomly distributed in the main chain and had no marked influence either on the tacticity or the molar mass of the PP. In the next step, the reactivity of the synthesised polypropylene-co-octenyldimethylphenylsilane (PP-co-SiPh) was increased by post-treatment with HBF₄ to give the highly reactive fluorosilane form (PP-co-SiF). The reactivities of the post-treated form, PP-co-SiF, as well of the untreated copolymer, PP-co-SiPh, were tested by using them as modifiers (0.1-0.4 phr) in composites of commercial polypropylene and microsilica (μSi 1-4 phr). When PP-co-SiF was the modifier the influence on the morphology of the composite was negligible. However, the crystallization temperature of the PP matrix was found to increase >8 °C at most, indicating an increased adsorption of the polymer on the filler surface. Most interestingly, the untreated PP-co-SiPh showed almost the same influence on the properties of the composites, indicating an interaction/reactivity between the (hexyl)dimethylphenylsilane side group and the microsilica filler. The suspected reactivity was separately confirmed by successful coating of microsilica filler with molecular trimethylphenylsilane. The phenylsilane was found to react in a manner similar to how the halosilanes react with the hydroxyl groups at the silica surface. To our knowledge, this reaction is reported for the first time.     

Functionalization of polyethylene with silane comonomers

We synthesized a new weakly interacting monomer with a reactive phenylsilane group that is an intermediate for many functional groups. The synthesis was performed in two steps: the hydrosilylation of 1,7‐octadiene with dimethylchlorosilane and a Grignard reaction with phenyl magnesium bromide. The new monomer, 7‐octenyldimethylphenylsilane, was isolated and copolymerized with ethylene via metallocene catalysts (Me₂Si(Me‐2‐Ind)₂ZrCl₂ and Et(Ind)₂ZrCl₂) and methylaluminoxane (MAO) as a cocatalyst. Electropositive silicon had no negative effect on the copolymerization reaction. The polymerization activity increased, and the molar mass of the product remained at a high level. The comonomer incorporation reached a significant 11.8 wt % (2.6 mol %). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1303–1308, 2002     

Copolymerization of vinylcyclohexane with ethene and propene using zirconocene catalysts

Vinylcyclohexane (VCH) was copolymerized with ethene and propene using methylaluminoxane‐activated metallocene catalysts. The catalyst precursor for the ethene copolymerization was rac‐ethylenebis(indenyl)ZrCl₂ ( 1 ). Propene copolymerizations were further studied with C_s‐symmetric isopropylidene(cyclopentadienyl)(fluorenyl)ZrCl₂ ( 2 ), C₁‐symmetric ethylene(1‐indenyl‐2‐phenyl‐2‐fluorenyl)ZrCl₂ ( 3 ), and “meso”‐dimethylsilyl[3‐benzylindenyl)(2‐methylbenz[e]indenyl)]ZrCl₂ ( 4 ). Catalyst 1 produced a random ethene–VCH copolymer with very high activity and moderate VCH incorporation. The highest comonomer content in the copolymer was 3.5 mol %. Catalysts 1 and 4 produced poly(propene‐co‐vinylcyclohexane) with moderate to good activities [up to 4900 and 15,400 kg of polymer/(mol of catalyst × h) for 1 and 4 , respectively] under similar reaction conditions but with fairly low comonomer contents (up to 1.0 and 2.0% for 1 and 4 , respectively). Catalysts 2 and 3 , both bearing a fluorenyl moiety, gave propene–VCH copolymers with only negligible amounts of the comonomer. The homopolymerization of VCH was performed with 1 as a reference, and low‐molar‐mass isotactic polyvinylcyclohexane with a low activity was obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6569–6574, 2006     

Elasto-plastic approach for paper cockling phenomenon: On the importance of moisture gradient

Cockling of paper is a common problem occurring in the production, storage and end-use of paper. It is usually induced by a moisture content change. In many cases, cockling is an irreversible phenomenon; i.e. the initial shape is not obtained although the initial moisture content is restored. This kind of moisture content change occurs in copying machines and in the printing process, for example. In this paper, we present a continuum mechanical model, which is used to study the irreversible cockling of paper. In the model, paper is treated as an orthotropic elasto-plastic material and the model takes into account the small-scale variation of fibre orientation. The model is used to show the importance of the through-thickness moisture gradient on the cockling phenomenon during a cyclic moisture content change. The results suggest that the moisture gradient is a crucial factor for the irreversible cockling.