Physico-chemical characterization of nanofiltration membranes.

This study presents a methodology for an in-depth characterization of six representative commercial nanofiltration membranes. Laboratory-made polyethersulfone membranes are included for reference. Besides the physical characterization [molecular weight cut-off (MWCO), surface charge, roughness and hydrophobicity], the membranes are also studied for their chemical composition [attenuated total reflectance Fourier spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS)] and porosity [positron annihilation spectroscopy (PAS)]. The chemical characterization indicates that all membranes are composed of at least two different layers. The presence of an additional third layer is proved and studied for membranes with a polyamide top layer. PAS experiments, in combination with FIB (focused ion beam) images, show that these membranes also have a thinner and a less porous skin layer (upper part of the top layer). In the skin layer, two different pore sizes are observed for all commercial membranes: a pore size of 1.25-1.55 angstroms as well as a pore size of 3.20-3.95 angstroms (both depending on the membrane type). Thus, the pore size distribution in nanofiltration membranes is bimodal, in contrast to the generally accepted log-normal distribution. Although the pore sizes are rather similar for all commercial membranes, their pore volume fraction and hence their porosity differ significantly.     

Use of x-ray microtomography to visualise dynamic adsorption of organic vapour and water vapour on activated carbon

X-ray microtomography coupled with image analysis was used to quantify the adsorption of vapours on activated carbon beds. This technique was tested using three different challenges: CCl₄, water vapour and a mixture of water- and organic vapour. It is shown that the used technique allows determining the adsorption front progress in the case of organic vapour and mixture of water and organic vapour whereas the existence of this front was not so obvious in the case of water vapour. Experimental results obtained for organic vapours were interpreted on the basis of the Wheeler-Jonas equation: a good agreement was found between experimental and theoretical breakthrough times.     

1,25-Dihydroxyvitamin D3 and analogues protect primary human keratinocytes against UVB-induced DNA damage

Exposure to UVB irradiation is a major risk factor for the development of skin cancer. Therefore, it is important to identify agents that can offer protection against UVB-caused damage. Photocarcinogenesis is caused largely by mutations at sites of incorrectly repaired DNA photoproducts, of which the most common are the cyclobutane pyrimidine dimers (CPDs). In this study, we demonstrated that 1,25-dihydroxyvitamin D3 [1,25(OH)2D3] protects primary human keratinocytes against the induction of CPDs by UVB. This protection required pharmacologic doses 1,25(OH)2D3 and an incubation period of at least 8 h before irradiation. Furthermore, we provided arguments indicating that the anti-proliferative capacity of 1,25(OH)2D3 underlies its protective effect against UVB-induced DNA damage. Finally, we showed that 19-nor-14-epi-23-yne-1,25(OH)2D3 (TX 522) and 19-nor-14,20-bisepi-23-yne-1,25(OH)2D3 (TX 527), two low-calcemic analogues of 1,25(OH)2D3, were even 100 times more potent than the parent molecule in inhibiting UVB-caused DNA damage. These molecules are therefore promising candidates for the chemoprevention of UVB-induced skin cancer.     

Characteristics and performance of a "universal" membrane suitable for gas separation, pervaporation, and nanofiltration applications

The large diversity of membrane separation processes results in a different optimization of membrane materials and structures for each process. In this article, the extent to which a single membrane type can be used in gas separation, pervaporation, and nanofiltration has been investigated. Interpretation of transport and separation properties has led to the conclusion that the membrane SolSep 3360 is a multifunctional membrane fulfilling all requirements for the three separation processes. This can be achieved by keeping a good balance between the thickness of the top layer, sterical hindrance during transport, and the effect of hydrophobicity/hydrophilicity.     

Experiments with Organic Modifiers in Reversed-Flow MEKC

Reversed-flow MEKC, i.e. MEKC at low pHs to suppress the electroosmotic flow, was evaluated for the separation of some homologous series. At low pHs compared to MEKC, the elution order reverses and normal phase type migration is obtained. Moreover, the elution window is nearly infinite. Efficiencies are very high and reproducibilities in absolute migration times are acceptable (%RSD < 5). The influence of a series of alcohol modifiers was investigated.     

Synthesis and modifications of a small library of 1,4-benzodiazepin-3-ones toward potential inhibitors of the collagen—von Willebrand Factor interaction

A library of 1,4-benzodiazepin-3-one-based turn mimetics were synthesized and tested for their antithrombotic abilities. These mimetics are designed to incorporate amino acid side chains of the previously reported paratope of the inhibitory anti-von Willebrand Factor antibody 82D6A3. Modifications were performed on the scaffolds by alkylation of the N¹-position and acylation of the reduced nitro group. Hereby the number of functional groups incorporated on the core was expanded.     

Trimetallic Nickel–Lanthanum and Nickel–Gadolinium Metallomesogens

Adducts were formed between a mesomorphic Ni(salen) complex [salen=2,2′-N,N′-bis(salicylidene)ethylenediamine] with six terminal alkoxy chains and a lanthanide nitrate (Ln=La, Gd). Different alkoxy chain lengths were used: OC¹²H²⁵, OC¹⁴H²⁹, OC¹⁶H³³ and OC¹⁸H³⁷. Trinuclear nickel–lanthanum and nickel–gadolinium complexes [Ln(NO³)³{Ni(salen)}²] were obtained. The compounds exhibit a wide-temperature-range hexagonal columnar mesophase (Col^H) with rather low melting points. The mesophase stability ranges of both the parent nickel complexes and the nickel–lanthanide complexes decrease with increasing chain length. A decrease in the mesophase stability range over the lanthanide series was also observed. The results are compared with those of similar copper–lanthanide complexes. A marked difference is the higher thermal stability of the nickel–lanthanide complexes in comparison with the copper–lanthanide complexes.     

Combination of COFRADIC and high temperature-extended column length conventional liquid chromatography: a very efficient way to tackle complex protein samples, such as serum

The previously reported COmbined FRActional DIagonal Chromatography (COFRA-DIC) methodology, in which a subset of peptides representative for their parent proteins are sorted, is particularly powerful for whole proteome analysis. This peptide-centric technology is built around diagonal chromatography, where peptide separations are crucial. This paper presents high efficiency peptide separations, in which four 250 x 2.1 mm, 5 microm Zorbax 300SB-C18 columns (total length 1 m) were coupled at operating temperatures of 60'C using a dedicated LC oven and conventional LC equipment. The high efficiency separations were combined with the COFRADIC procedure. This extremely powerful combination resulted, for the analysis of serum, in an increase in the uniquely identified peptide sequences by a factor of 2.6, compared to the COFRADIC procedure on a 25 cm column. This is a reflection of the increased peak capacity obtained on the 1 m column, which was calculated to be a factor 2.7 higher than on the 25 cm column. Besides more efficient sorting, less ion suppression was noticed.     

Removal of lead from aqueous solutions by adsorption with surface precipitation

An activated carbon from Coconut (Cocos nucifera) shells was prepared by physical activation with carbon dioxide and water vapor. The activated carbon obtained has a surface area of 1058 m² g^?1 and such a high micropore volume of 0.49 cm³ g^?1. This carbon was studied for the removal of lead from water. Sorption studies were performed at 30 °C, at different pH and adsorbent doses, in batch mode. Lead precipitation was observed on the surface of the activated carbon. Maximum adsorption occurred at pH 9 for an adsorbent dose of 2 g L^?1. Kinetic studies, at the initial concentration of 150 mg L^?1 of lead, pH 5 and an adsorbent dose of 1 g L^?1, yielded an equilibrium time of 50 h for this activated carbon. The kinetic data were modeled with the pseudo first order, the pseudo second order and the Bangham models. The pseudo second order model fitted the data well. The sorption rate constant (7 × 10^?4 mol^?1 Kg s^?1) and the maximum amount of lead adsorbed (0.23 mol kg^?1) are quite good compared to the data found in literature. Sorption equilibrium studies were conducted in a concentration range of lead from 0 to 150 mg L^?1. In an aqueous lead solution with an initial concentration of 30 mg L^?1, at pH 5, adsorbent dose 1 g L^?1, activated Coconut shell carbon removed at equilibrium 100 % of the heavy metal. The equilibrium data were modeled with the Langmuir and Freundlich equations, of which the former gave the best fit. The Langmuir constants Q_{max eq} (0.23 mol kg^?1) and K_L (487667 L mol^?1) are in good agreement with literature. XPS studies identified adsorbed species as lead carbonates and/or lead oxalates and precipitates as lead oxide and/or lead hydroxide on the activated carbon surface. The Coconut shell activated carbon is a very efficient carbon due to its high surface area, to the presence of many micropores on its surface and to the presence surface groups like hydroxyls promoting adsorption in the porous system and lead crystal precipitation on the activated carbon surface.