Pattern formation in diffusion-limited reactions

The conditions for macroscopic segregation ofA andB in a steady-stateA+B 0 reaction are studied in infinite systems. Segregation occurs in one and two dimensions and is marginal ford=3. We note the dependence of these results on the precise experimental conditions assumed in the theory. We also note the difference between these results and our earlier ones for finite systems where the critical dimension isd=2.     

Sulfonylcarbamimidic azides from sulfonyl chlorides and 5-aminotetrazole

Treatment of o-nitrobenzenesulfonyl chloride ( 3 ) with 5-aminotetrazole (5-AT) gave [(2-nitrophenyl)-sulfonyl]carbamimidic azide ( 6 ), a ring-opened isomer of the expected N-(1H-tetrazol-5-yl)-2-nitrobenzenesulfonamide ( 4 ). Sulfonylcarbamimidic azide 6 was converted to 2-amino-N-(aminoiminomethyl)benzene-sulfonamide ( 7 ) with ethanolic stannous chloride, and to 3-amino-1,2,4-thiadiazine 1,1-dioxide ( 8 ) with sodium dithionite. Methanesulfonyl chloride ( 9 ) and 5-AT gave 2-(methylsulfonyl)carbamimidic azide ( 10 ), which isomerized to 5-[(methylsulfonyl)amino]-1H-tetrazole ( 11 ) in warm ethanol. Attempted cycloaddition of 2-(phenylsulfonyl)carbamimidic azide ( 13 ) and ethyl vinyl ether led only to alkylated tetrazole products. In addition, other tetrazole-alkylating reactions are described. Isomers produced from these alkylations were differentiated with ¹³C nmr spectroscopy.     

Statistical replacement for systems with delta-correlated fluctuations

Nonlinear systems with stochastic parameters are approximated by simpler systems using a method that we call statistical replacement. This method is an extension of the previously developed AGREE which was restricted to systems with additive fluctuations. Statistical replacement incorporates the distinctions between globally stable thermodynamically closed systems and thermodynamically open systems that can be unstable.     

HPLC isolation and NMR structure elucidation of the most prominent octabromo isomer in technical octabromo diphenyl ether

The major octabromo isomer of technical octabromo diphenyl ether mixture (technical octaBDE) DE-79 was isolated by RP-HPLC. Three serially coupled columns (each 250 mm long) enabled a good separation of the target compound from other congeners using 100% ACN as eluent. Approximately 100 microg of the target compound was isolated with a purity of >90% and investigated by MS for confirmation of the degree of bromination. 1H-NMR and 2-D 1H-13C correlation NMR spectra unequivocally clarified that the octaBDE in question is 2,2',3,3',4,4',6,6'-octabromodiphenyl ether (BDE 197). Based on annual production rates of technical BDE products (1999/2001), approximately 380 tons of BDE 197 were annually produced which, on the long term, may enter the environment. Compared with other individual BDE congeners, BDE 197 has the seventh highest application rate. Reductive debromination of BDE 197 can lead to four hepta-, 15 hexa-, 23 penta-, and 28 tetra-BDE isomers, respectively. This variety includes all known major BDEs of environmental concern (BDE 47, 85, 99, 100, 153, 154, and 183). The identification of BDE 197 in technical octaBDE DE-79 strongly suggests that research on the environmental fate of BDEs should include this key-BDE congener.     

Positive and negative ion chemistry of the anesthetic halothane (1-bromo-1-chloro-2,2,2-trifluoroethane) in air plasma at atmospheric pressure

The ion chemistry of 1-bromo-1-chloro-2,2,2-trifluoroethane (the common anesthetic halothane) in air plasma at atmospheric pressure was investigated by atmospheric pressure chemical ionization mass spectrometry (APCI-MS). The major positive ion observed at low declustering (API interface) energies is the ionized dimer, M(+.)M, an unexpectedly abundant species which possibly is stabilized by two H-bonding interactions. At higher energies [M--HF](+.) and [M--Br](+) prevail; the former, corresponding to ionized olefin [ClBrC=CF(2)](+.), appears to originate from M(+.)M and is quite stable towards fragmentation. The latter fragment ion ([M--Br](+)) and its analogue, [M--Cl](+), which is also observed though at much lower abundance, are originally ethyl cations (+)CHX--CF(3) (X = Br, Cl) which, upon collisional activation, rearrange and fragment to CHFX(+) via elimination of CF(2). All of the above described ions are also observed in humid air: in addition, the oxygenated ion [ClBrC=CFOH](+.) also forms in humid air via water addition to [ClBrC=CF(2)](+.) and HF elimination, as observed earlier for ionized trichloroethene. In contrast with similar chloro- and fluoro-substituted ethanes, halothane does not react with H(3)O(+) in the APCI plasma, a result confirmed by selected ion APCI triple-quadrupole (TQ) experiments. Major negative ions formed from halothane in the air plasma are Br(-) and, to a lesser extent, Cl(-), and their complexes with neutral halothane. APCI-TQ experiments indicated that Br(-) and Cl(-) are formed via reaction of halothane with O(2) (-.), O(2) (-.)(H(2)O) and O(3) (-.), possibly via dissociative electron transfer or nucleophilic substitution. Competing proton transfer was also observed in the reaction with O(2) (-.) and, at high halothane pressure, also with O(2) (-.)(H(2)O); at lower pressures the molecular anion M(-.) was observed instead. The other minor anions of the air plasma, NO(2) (-), N(2)O(2) (-.) and NO(3) (-), were found to be unreactive towards halothane.     

Novel CFCs-substitutes recommended by EPA (hydrofluorocarbon-245fa and hydrofluoroether-7100): Ion chemistry in air plasma and reactions with atmospheric ions

The ion chemistry of the title compounds, a nonafluorobutyl methyl ether and a hydrofluoropropane, is elucidated by a combination of studies using atmospheric pressure ionization mass spectrometry and triple quadrupole mass spectrometry. In the positive ion mode, the hydrofluoroether readily forms an [M - F]+ ion, attributable to hydronium ion induced dehydrofluorination, the product of which can be further hydrated to give a protonated hydrofluoroester. By contrast, the hydrofluoropropane does not react with the hydronium ion but rather gives hydrofluoroalkenylium cations via H atom and F atom abstraction by the dioxygen radical cation. In the negative ion mode, the fluorobutyl methyl ether undergoes dissociative electron capture with O2-*, O2-*(H2O), O3-*, and NO2- to generate the fluorobutoxy anion, which can dissociate by CF2[doublebond]O loss to give the perfluorocarbanion when the precursor ions are internally excited. The hydrofluoropropane reacts readily with common atmospheric anions to form molecular complexes with F-, O2-*, and O3-* and the strongly H-bonded species, O2-*(HF) and F-(HF). Interestingly, isomeric pentafluoropropanes form in the reaction with O2-*, either O2-*(HF) or F-(HF), depending on the specific pattern of the fluoro substitution.     

Synthesis of a deca-lithium cage containing an [(RN)2As(mu-NR)As(NR)2]4- tetraanion; a homologue of group 15 trianions of the type [E(NR)3]3-

The novel, deca-lithium cage [(mtaNHLi)(As2(Nmta)5)-Li(4).2thf]2 (1) (mtaN = 5-methylthiazolyl, C4H4N2S) contains an imido-bridged tetraanion [(mtaN)2As(mu-Nmta)-As(Nmta)2]4-, which represents a new type of multi-functional imido group 15 ligand framework (homologous with group 15 anions of the type [As(NR)3]3-).     

Monocyclopentadienylhydride derivatives of ruthenium: stereoselective proton transfer and proton-hydride exchange in an extremely short dihydrogen bond

Diastereomerically pure complexes of formula CpRuCl(PP) and CpRuH(PP) with chiral ferrocenyl diphosphines were prepared and the selectivity of proton-transfer processes over the monohydride compounds with different acids was studied. With 1 equiv of HBF(4) the cis-dihydrogen and trans-dihydride complexes were formed while with 3 equiv of CF(3)CO(2)H the trans-dihydride derivative was the only product. However, the use of 1 equiv of CF(3)CO(2)H led to a dihydrogen bonded complex with an extremely short RuH...HO(2)CF(3) interaction that exhibits proton-hydride exchange. Using the labeled acid CF(3)CO(2)D, a stereoselective transference of the deuteron was demonstrated that implies the previous epimerization of the monohydride and the subsequent attack of the acid in the position previously occupied by the hydride.     

Synthesis of a new class of chiral 1,5-diphosphanylferrocene ligands and their use in enantioselective hydrogenation

A new family of ferrocenylphosphane ligands has been prepared. Their flexible synthesis allows many structural modifications. The asymmetric induction of these ligands was examined in the hydrogenation of functionalized C=C, C=O, and C=N bonds. The enantioselectivity of the reaction was strongly dependent on the substituent R at the position alpha to the ferrocene moiety. In many cases, both enantiomeric beta-hydroxyesters of the reduction product can be obtained by simply replacing a dimethylamino group in the ligand with a methyl group.     

Novel fluorinated block copolymer architectures fuelled by atom transfer radical polymerization

Block copolymers based on poly(pentafluorostyrene), PFS, in various numbers and of different lengths, and polystyrene are prepared by atom transfer radical polymerization (ATRP). Di- and triblock copolymers with varying amounts of PFS were synthesized employing either 1-phenylethylbromide or 1,4-dibromoxylene as initiators for ATRP. Diverse bromo(ester) (macro)initiators were also devised and involved in the formulation of fluorinated pentablock as well as amphiphilic triblock copolymers with a central polyether segment. Amphiphilic star-shaped fluoropolymers, hydrophobic fluorinated nanoparticles, or segmented fluorinated star-shaped block copolymers are further designed by use of different multifunctional initiators. The composition of the novel materials with PFS is determined by combination of SEC and ¹H NMR. Glass transition temperatures and thermal stabilities of the hydrophobic star-shaped PFSs on a six arm dipentaerythritol core are investigated in a wide range of molecular masses and further discussed.