A Convenient Synthesis of N-[2-(Heteroarylhydrazono) Ethyl]Benzamides

The synthesis of N-[2-(heteroarylhydrazono)ethyl]benz-amides starting from (Z)-2-benzoylamino-3-chloro-2-propenoic acid and heteroarylhydrazines is reported.     

Influence of anion composition and size on the double layer capacitance for Bi(111)|room temperature ionic liquid interface

Cyclic voltammetry and electrochemical impedance spectroscopy have been applied for investigation of electrochemically polished Bi(111) electrode in 1-ethyl-3-methyl imidazolium tris(pentafluoroethyl)trifluorophosphate (EMImFAP), 1-ethyl-3-methyl imidazolium tetracyanoborate (EMImTCB) and 1-ethyl-3-methyl imidazolium tetrafluoroborate (EMImBF₄) ionic liquids. The region of ideal polarizability, series resistance and capacitance, limiting high-frequency and low-frequency capacitances have been calculated. The lower series capacitance values at electrode potential less negative than the potential of the minimum in the capacitance vs. voltage curve for Bi(111)|EMImFAP than that for EMImBF₄, and especially for EMImTCB, have been explained by the bigger diameter of FAP^?, higher cation and anion sizes symmetry, and less expressed surface activity (i.e. lower closest approach of the FAP^? mass centre to an electrode surface) compared with BF₄^? and TCB^? anions.     

On the modeling of arginine-bound carboxylates: a case study with Pyruvate Formate-Lyase

High level ab initio and density functional calculations have been employed to determine the most appropriate manner in which to truncate an arginine-bound carboxylate motif, using the substrate mechanism of Pyruvate Formate-Lyase as a case study. The results show that, both qualitatively and quantitatively, a neutral carboxylic acid provides a more realistic approximation to the salt bridge arrangement than does a bare anionic carboxylate substituent.     

High-performance liquid chromatography of hydroxysteroids detected with post-column immobilized enzyme reactors

Assaying the low concentrations of steroid hormones in extracts of body fluids requires detectors that are both highly sensitive to the steroid and relatively insensitive to interfering compounds usually present in much higher concentrations. To explore the use of moderately specific enzymes in post-column reactors, we immobilized 3 alpha- and beta-hydroxysteroid dehydrogenase on controlled pore glass beads, 37 microns in diameter, and constructed 4.6-mm diameter reactor columns, 3-cm long, packed with one of the two kinds of these beads. Hydroxysteroids eluted from the analytical column were mixed with the coenzyme, nicotinamide adenine dinucleotide (NAD), before passing through the reactor. The effluent from the reactor was passed through the 70-microliters flow cell of a fluorometer in which the fluorescence of the NADH produced in the enzyme-catalyzed oxidation of the hydroxysteroid was monitored. At the conventional high-performance liquid chromatography flow-rates used, oxidation of the steroids was almost complete. The yield depended on both the residence time of steroids in the reactor column and the concentration of organic modifier in the reaction mixture. Maximal yield was obtained with buffer having a low organic solvent concentration and passing through the reactor slowly. In assays of mixtures of epimeric hydroxysteroids, the 3 alpha-hydroxysteroids were detected with the 3 alpha-hydroxysteroid dehydrogenase reactor; the beta-hydroxysteroids were not, confirming the specificity of the enzymatic detection. With the fluorometer used, picomole quantities of steroids could easily be distinguished from noise.     

The kinetics of electroreduction of europium(III) cations at bismuth single-crystal electrode

Electroreduction of Eu(ClO₄)₃ and Eu₂(SO₄)₃ has been studied at electrochemically polished \textBi( 01[`1] ) {\text{Bi}}\left( {01\bar{1}} \right) single-crystal electrode in an acidic HClO₄ or H₂SO₄ (pH ~3) aqueous solution with LiClO₄ or Na₂SO₄ additions as a surface inactive electrolyte. The Eu³⁺ cations electroreduction rate depends on the electrode potential applied and the concentration of the supporting electrolyte as well as the concentration of the Eu³⁺ ions. At the more negative electrode potentials than the zero charge potential (zcp), the diffusion current plateaus were observed. The values of the rate constant for the heterogeneous reaction calculated at zcp are independent of the base electrolyte concentration studied. Analysis of the kinetic data corrected for the electrical double-layer effect shows that the coincidence of the corrected Tafel plots can be achieved, assuming that the effective charge of a reactant (+1.6) is significantly lower than it would be expected (z _A = +3).     

Understanding the contrast mechanism in scanning tunneling microscopy (STM) images of an intermixed tetraphenylporphyrin layer on Ag(111)

The appearance of tetraphenylporphyrins in scanning tunneling micrographs depends strongly on the applied bias voltage. Here, we report the observation and identification of certain features in scanning tunneling microscopy (STM) images of intermixed layers of tetraphenylporphyrin (2HTPP) and cobalt-tetraphenylporphyrin (CoTPP) on Ag(111). A significant fraction of an ordered monolayer of commercially available CoTPP appears as "pits" at negative bias voltages around -1 V. The obvious possibility that these pits are missing molecules within the ordered layer could be ruled out by imaging the molecules at reduced bias voltages, at which the contrast of the pits fades, and at positive bias voltages around +1 V, at which the image contrast is inverted. With the investigation of the electronic structure, in particular the density of states (DOS) close to the Fermi level, of CoTPP and 2HTPP layers by means of ultraviolet photoelectron spectroscopy (UPS) and scanning tunneling spectroscopy (STS), the contrast mechanism was clarified. The correlation of the bias dependent contrast with the UPS data enabled us to interpret the "pits" as individual 2HTPP molecules. Additional evidence could be provided by imaging layers of different mixtures of 2HTPP and CoTPP and by high-resolution STM imaging of the features in CoTPP.     

Sub-Minute Analysis of Lactate from a Single Blood Drop Using Capillary Electrophoresis with Contactless Conductivity Detection in Monitoring of Athlete Performance

A simple and fast method for the analysis of lactate from a single drop of blood was developed. The finger-prick whole blood sample (10 µL) was diluted (1:20) with a 7% (w/v) solution of [tris(hydroxymethyl)methylamino] propanesulfonic acid and applied to a blood plasma separation device. The device accommodates a membrane sandwich composed of an asymmetric polysulfone membrane and a supporting textile membrane that allows the collection of blood plasma into a narrow glass capillary in less than 20 s. Separated and simultaneously diluted blood plasma was directly injected into a capillary electrophoresis instrument with a contactless conductivity detector (CE-C⁴D) and analyzed in less than one minute. A separation electrolyte consisted of 10 mmol/L l-histidine, 15 mmol/L dl-glutamic acid, and 30 µmol/L cetyltrimethylammonium bromide. The whole procedure starting from the finger-prick sampling until the CE-C⁴D analysis was finished, took less than 5 min and was suitable for monitoring lactate increase in blood plasma during incremental cycling exercise. The observed lactate increase during the experiments measured by the developed CE-C⁴D method correlated well with the results from a hand-held lactate analyzer (R = 0.9882). The advantage of the developed CE method is the speed, significant savings per analysis, and the possibility to analyze other compounds from blood plasma.     

Electrochemical impedance study of hydrogen evolution on Bi(001) electrode in the HClO4 aqueous solutions

Electrochemical impedance spectroscopy has been applied for investigation of the hydrogen evolution kinetics at the electrochemically polished Bi(001) plane, and the complicated reaction mechanism (slow adsorption and charge-transfer steps) has been established. The charge-transfer resistance and adsorption capacitance values depend noticeably on the electrode potential applied. The adsorption resistance is maximal in the region of electrode potential E _min = −0.65 V vs. (Hg|Hg₂Cl₂|4 M KCl), where the minimal values of constant phase element (CPE) coefficient Q have been calculated. The fractional exponent α _CPE values of the CPE close to unity (α _CPE ≥ 0.94 and weakly dependent on the electrode potential and pH of solution () have been obtained, indicating the weak deviation of Bi(001)|HClO₄ + H₂O interface from the ideally flat capacitive electrode. Q differs only very slightly from double-layer capacitance C _dl values in the whole region of potentials and , investigated.