A criterion for dewetting initiation from surface disturbances on ultrathin polymer films

Nanoindentation-induced defects on ultrathin (h = 17 nm) polystyrene (PS) films that are spin cast on silicon (Si) substrates, with residual depths of penetration lower than the film thickness (<17 nm), can either grow to initiate dewetting or level, which results in a flat polymer surface, upon heating above the glass-transition temperature (T(g)). The excess surface energy (DeltaF(gamma)) of the system, which is added to the initially flat coating with the formation of an indent, provides a critical value, DeltaF(gamma,crit) = 6.1 x 10(-16) J, which determines indent evolution upon annealing. An indent grows when DeltaF(gamma) > DeltaF(gamma,crit) and levels when DeltaF(gamma) < DeltaF(gamma,crit). This conclusion is in agreement with previous reports, which used DeltaF(gamma) to distinguish the two (dewetting/leveling) opposing processes (1) in the case of indents deeper than the film thickness and (2) in the case of built-in ordered surface disturbances by capillary force lithography.     

Evaluating a Cumaean Sibyl: Domenichino or later? A multi analytical approach

The purpose of this study is to clarify important details about a Cumaean Sibyl painting that is preserved in a private collection. This work, bearing neither signature nor date, has never undergone conservation. It was executed after Domenichino's Cumaean Sibyl, a work known to have been used as a model by many 18th century painters.Investigation of the anonymous artist's painting technique and identification of its constituent materials were facilitated by employing optical microscopy (OM), scanning electron microscopy (SEM/EDS), FTIR and microRaman spectroscopies and high performance liquid chromatography with diode array detection (HPLC-DAD). The painter's palette comprised lead white, yellow ochre, lead-antimonate yellow (Naples yellow), cinnabar, cochineal lake, madder lake, haematite, Prussian blue and carbon black.The detection of Prussian blue (synthesized in 1704 and widely used as artist's pigment after 1750) was decisive in establishing the work's authenticity for, as such, it cannot be attributed either to Domenico Zampieri (1581-1641) or to his apprentices. In addition, the identification of Naples yellow, which prevailed in the period from 1750 to 1850, supports this statement. Nevertheless, its elaborate painting technique strongly suggests an artist greatly influenced by the Renaissance masters. A comparison of its stylistic features with those of the Cumaean Sibyl of Angelica Kauffmann (1741-1807), a prolific 18th century artist known to have studied and to have copied Domenichino's Sibyl, reveals significant similarities between the two in composition and palette. The unsigned Sibyl, therefore, could well be by Kauffmann.     

Thermodynamic characterization of poly(2,2,3,3,3‐pentafluoropropyl methacrylate)

The thermodynamic characterization of a fluorinated methacrylic homopolymer was conducted by means of inverse gas chromatography (IGC), at infinite dilution. The homopolymer under study, poly(2,2,3,3,3‐pentafluoropropyl methacrylate) (PPFPMA), was synthesized via a free radical polymerization reaction and was characterized by the employment of Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and size exclusion chromatography (SEC) techniques. The specific retention volume of 15 solvents, used as probes, was used for the assessment of the Flory–Huggins interaction parameter, the weight fraction activity coefficient, the molar heat, energy and entropy of sorption, the partial heat of mixing of the probes, as well as the solubility parameter of the polymer. The results demonstrate that PPFPMA is insoluble in most organic solvents even at increased temperatures, with the exception of solvents like 2‐Butanone. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1826–1833, 2010     

Surface characterization of poly(2,2,3,3,3-pentafluoropropyl methacrylate) by inverse gas chromatography and contact angle measurements

A fluorinated methacrylic homopolymer, poly(2,2,3,3,3-pentafluoropropyl methacrylate) (PPFPMA) was synthesized by a free radical polymerization reaction. The dispersive component of the surface energy () of PPFPMA was determined by contact angle measurements and inverse gas chromatography (IGC). An extensive surface characterization was conducted by means of IGC. Surface characterization demonstrated that PPFPMA has low value, even at 35 °C and is a Lewis amphoteric polymer with predominantly basic character, as confirmed by the Lewis acidity and basicity constants K_A and K_B, respectively. The values of obtained by IGC are slightly higher than those obtained by the contact angle method. This trend can be attributed to the fact that IGC evaluates, primarily, high energy sites of a surface.     

Investigation of red natural dyes used in historical objects by HPLC-DAD-MS

High performance liquid chromatography (HPLC) with UV-Vis Diode Array Detection (DAD) and electrospray mass spectrometric (ESI-MS) method was utilized for the identification of coloring components of madder, Armenian and Mexican cochineal, lac dye, brazilwood, safflower and dragon blood--probably the most important red natural dyestuffs found in objects of the cultural heritage. UV-Vis detection limits in the range of 0.2-0.6 ng for carminic acid, alizarin and purpurin were achieved using a gradient elution of H2O-0.01% TFA and CH3CN-0.01% TFA. ESI mass spectrometer was also used, as a supportive detection method to the standard DAD, for further analysis of the tested materials, with the ability to analyze dyestuffs as small as one milligram. The presence of madder was revealed in two historical (Hellenistic and Roman period) samples, found in the Mediterranean area, by identifying purpurin in both of them. Munjistin was also identified in one of the samples (Hellenistic period) while alizarin was not detected, raising questions regarding the exact madder type, utilized in the historical samples.     

Superhydrophobic films for the protection of outdoor cultural heritage assets

A very simple method that can be used to impart superhydrophobicity to stone surfaces of monuments using common and low-cost materials that are already employed or are easy to be found by conservators is presented. A siloxane-nanoparticle dispersion is sprayed on a stone, and this process can result in the formation of a rough two-length-scale hierarchical structure that exhibits water repellent properties, provided that the nanoparticle concentration in the dispersion is higher than a critical value. Superhydrophobicity (static contact angle >150° and contact angle hysteresis <7°) is achieved, by this simple method (i) on the surfaces of three types of stones, Opuka, Božanovsky and Hořicky, which have been used for the restoration of the castle of Prague, (ii) using two poly (alkyl siloxane) products such as Rhodorsil 224 and Porosil VV plus, which are utilized by conservators and (iii) using common nanoparticles such as silica (SiO₂), alumina (Al₂O₃), tin oxide (SnO₂) and titanium oxide (TiO₂). It is shown that the stone substrate and the nanoparticle size (5–50 nm) or type have almost no effect on the wettability of the superhydrophobic surfaces, as comparable contact angles were measured on the three stone substrates, treated with any siloxane-particle composite. Treatments of the stones with pure (hydrophobic) siloxanes and siloxane-SiO₂ (superhydrophobic) composites result in comparable reductions of the water vapor permeability and the water amounts absorbed by capillarity. Consequently, the use of nanoparticles in the protective coatings does not have any obvious effect on the results of the aforementioned tests. However, the aesthetic appearance of the three stones, included in this study, is highly affected by the nanoparticles.     

High-performance liquid chromatographic determination of colouring matters in historical garments from the Holy Mountain of Athos

This work is probably the first attempt to identify the organic colouring materials contained in post-Byzantine textiles, from the Holy Mountain of Athos. Samples extracted from seven ecclesiastical garments (15th–19th century) are investigated by high performance liquid chromatography with UV-Vis diode array detection. The detection limits for alizarin, purpurin, carminic acid, laccaic acid A, luteolin, apigenin, genistein, fisetin, sulfuretin, ellagic acid, indigotin and indirubin are found to be within 0.002–0.029 μg mL⁻¹. The following organic dyes are identified in the extracts: dyer’s broom (Genista tinctoria L.), young fustic (Cotinus coggygria Scop.), an indigoid dye source either indigo (Indigofera species) or woad (Isatis tinctoria L.), madder, cochineal and lac dye (Kerria lacca Kerr). Furthermore, the identification of a brazilein derivative indicates the presence of a Caesalpinia dye source in the samples. Correspondence: Ioannis Karapanagiotis, Ormylia Art Diagnosis Center, Sacred Convent of the Annunciation, Ormylia, GR-63071 Chalkidiki, Greece     

Superhydrophobic composite films produced on various substrates

Hydrophilic silica (SiO2) nanoparticles were dispersed in solutions of poly(methyl methacrylate) (PMMA) and in solutions of a commercial poly(alkyl siloxane) (Rhodorsil 224), and the suspensions were sprayed on glass surfaces. The effect of the particle concentration on the hydrophobic character of PMMA-SiO2 and Rhodorsil-SiO2 films was investigated and showed the following: (i) Static contact angles (theta s), measured on surfaces that were prepared from dilute dispersions (particle concentration <1% w/v), increase rapidly with particle concentration and reach maximum values (154 and 164 degrees for PMMA-SiO2 and siloxane-SiO2, respectively). Further increases in particle concentration do not have any effect on theta s. (ii) The effect of particle concentration on the contact angle hysteresis (thetaAlpha - thetaR) is more complicated: as the particle concentration increases, we first notice an increase in hysteresis, which then decreases and finally becomes constant at elevated particle concentrations. The lowest thetaAlpha - thetaR values were 5 degrees for PMMA-SiO2 and 3 degrees for siloxane-SiO2, respectively. (iii) SEM and AFM images show that a two-length-scale hierarchical structure is formed on the surface of the superhydrophobic films. It is demonstrated that superhydrophobicity can be achieved using various hydrophilic nanoparticles (alumina and tin oxide nanoparticles were successfully tested) and that the substrate has almost no effect on the hydrophobic character of the applied coatings, which were produced on silicon, concrete, aluminum, silk, wood, marble, and of course glass. The results are discussed in light of Wenzel and Cassie-Baxter models.     

Comparison of extraction methods for the analysis of natural dyes in historical textiles by high-performance liquid chromatography

Different methods for the extraction of Dactylopius coccus Costa, Rubia tinctorum L., Isatis tinctoria L., Reseda luteola L., Curcuma longa L. and Cotinus coggygria Scop. from wool fibres are investigated using high-performance liquid chromatography with diode array detector (HPLC-DAD). The efficiencies of five extraction methods which include the use of HCl (widely used extraction method), citric acid, oxalic acid, TFA and a combination of HCOOH and EDTA are compared on the basis of the (a) number, (b) relative quantities, measured as HPLC peak areas and (c) signal-to-noise ratios (S/N) of the compounds extracted from the wool substrates. Flavonoid glycosides and curcuminoids contained in R. luteola L. and C. longa L., respectively, according to liquid chromatography with mass spectrometry (LC-MS) identifications, are not detected after treating the fibres with HCl. All the other milder methods are successful in extracting these compounds. Experiments are performed using HPLC-DAD to compare the HPLC peak areas and the S/N of the following extracted compounds: indigotin, indirubin, curcumin, demethoxycurcumin, bisdemethoxycurcumin, fisetin, sulfuretin, luteolin, luteolin-7-O-glucoside, apigenin, carminic acid, alizarin, puruprin and rubiadin. It is shown that the TFA method provides overall the best results as it gives elevated extraction yields except for fisetin, luteolin, apigenin and luteolin-7-O-glucoside and highest S/N except for fisetin and luteolin-7-O-glucoside. It is noteworthy that treatment of the fibres with the typical HCl extraction method results overall in very low S/N. The TFA method is selected for further studies, as follows. First, it is applied on silk dyed samples and compared with the HCl method. The same relative differences of the TFA and HCl methods observed for the wool dyed samples are reported for the silk dyed samples too, except for rubiadin, luteolin and apigenin. Thus, in most cases, the nature of the substrate (wool or silk) appears to have negligible effects on the relative difference of the two extraction methods. Second, the selected TFA method is applied to treat wool and silk historical samples extracted from textiles of the Mamluk period, resulting in the identification of several colouring compounds. In all extraction methods mentioned above, DMSO is used to dissolve the dyes, after acid treatment.