Two‐stage copolycondensation of preformed oligomers with bisphenols by tosyl chloride/dimethylformamide/pyridine from distributions of resulting oligomers determined by a combination of gel permeation chromatography and NMR

A two‐stage co‐oligomerization of the oligomers initially formed from an equimolar mixture of isophthalic acid (IPA) and terephthalic acid (TPA) and 2,2‐bis(4‐hydroxyphenyl)propane (BPA, 50 mol %) with bisphenols (BPs, 20 mol %) was carried out using a tosyl chloride/dimethylformamide/pyridine condensing agent. The distributions of the resulting oligomers (n_x‐mers), which were quenched with methanol, were determined by a combination of gel permeation chromatography (GPC) and NMR. These distributions (presented by molar percentage) were conveniently calculated with the equation n_x (mol %) = n_x (% mol by GPC) × n₀ (mol % by NMR)/n₀ (% mol by GPC), where n_x (% mol) = n_x (wt % by GPC)/its molecular weight. The results showed the distributions of the preformed IPA/TPA‐BPA oligomers to be in fairly good accord with those obtained directly from GPC and to be supported by the NMR results. The calculation was applied to the co‐oligomers prepared up to a reaction of 0.7, at which there was an increase in the number of higher oligomers indivisible by GPC and the distributions could no longer be determined by molar percentage. The calculated distributions are discussed in relation to the results of copolycondensation. The sequence distributions in the resulting co‐oligomers, which were also examined by NMR, are compared with those in the copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 44–51, 2004     

Microwave-promoted Suzuki-Miyaura coupling reactions in a cycloalkane-based thermomorphic biphasic system

Microwave-promoted Suzuki-Miyaura coupling reaction of aryl halides attached to a cycloalkane-soluble platform was accomplished in a cycloalkane-based thermomorphic biphasic system. Following irradiation and subsequent cooling, the monophasic reaction mixture immediately formed a biphasic solution to allow facile workup and separation of the product.     

Prompt gamma-ray analysis using cold and thermal guided neutron beams

The extraction behavior of uranium(VI), plutonium(IV) and some fission products like zirconium(IV), ruthenium(III) and europium(III) from 3.5M nitric acid with -irradiated organic phase pre-equilibratedn-dodecane solutions of dihexyl derivatives of hexanamide (DHHA), octanamide (DHOA) and decanamide (DHDA) has been investigated as a function of absorbed dose upto 184·10⁴ Gy. The results indicate that the extraction of uranium(VI) decreases gradually with dose upto 72·10⁴ Gy and becomes almost constant thereafter, while, the extraction of plutonium(IV) decreases upto a dose of 20·10⁴ Gy and then increases rapidly up to a dose of 82·10⁴ Gy indicating synergistic effects of radiolytic products formed at higher doses. Extraction of zirconium(IV) increases gradually upto a dose of 72·10⁴ Gy. Europium(III) does not get extracted with any of these amides in the entire dose range (0–184·10⁴ Gy) studied, however, ruthenium shows insignificant increase in extraction with dose. The decrease inD values noticed in the case of plutonium and zirconium after the dose of 72·10⁴ Gy which was attributed to the third phase formation and emulsification. Infrared studies confirm the final products of radiolysis as the respective amines and carboxylic acids. The degraded amide contents have been estimated by quantitative IR spectrophotometric technique. Extraction data obtained for uranium(VI) and plutonium(IV) with TBP/n-dodecane system have also been compared under similar experimental conditions.     

Association behavior of a nitrilotriacetic-acid-modified dye in a poly(vinyl alcohol) film containing Ni(II)-adsorbed gold nanoparticles.

The association behavior of the dyes 5(6)-carboxyfluorescein and nitrilotriacetic acid (NTA)-modified 5(6)-carboxyfluorescein (F-NTA) in a poly(vinyl alcohol) (PVA) film and in a PVA film containing metal nanoparticles is investigated. Well-dispersed gold nanoparticles (AuNps) and Ni(II)-adsorbed AuNps are formed in the PVA film using in situ photochemical fabrication method. 5(6)-carboxyfluorescein and F-NTA are doped into the films. The F-NTA forms an H-aggregate in the PVA film containing Ni(II)-adsorbed AuNps. It is suggested that the interaction between NTA and Ni(II) adsorbed on the AuNps promotes the formation of the H-aggregate.     

Direct observation of the one-electron reduction of methyl viologen mediated by the CO2 radical anion during TiO2 photocatalytic reactions

The one-electron reduction of methyl viologen (MV(2+)) mediated by the carbon dioxide radical anion (CO(2)(*-)) during photocatalytic reactions in a colloidal TiO(2) aqueous solution (pH 2) has been investigated by time-resolved absorption spectroscopy. The formation of MV(*+) generated from the one-electron reduction reaction with CO(2)(*-), which is generated from the one-electron oxidation reactions with the photogenerated holes (h(+)), was directly observed. The spectral features of the photogenerated charge carriers and the kinetic analysis of the formation process of MV(*+) revealed that the CO(2)(*-), desorbed from the surface, reacts with MV(2+) via a homogeneous electron-transfer process in the bulk solution.     

Theoretical study on solvation effects in chemical reactions: A vibrational coupling model

A vibrational coupling model to treat the solvation effects in chemical reaction rate calculations is proposed and applied to the intramolecular hydrogen transfer reaction CH₃O· → ·CH₂OH in the condensed phase. The effect of solvation is taken into account in two ways: (1) the solvent effect on the activation energy of the reaction is simulated by including 39 surrounding water molecules, represented by fractional charges at the assumed atomic positions, in the potential energy surface calculation; and (2) the vibrational couplings between the 10 nearest solvent molecules and the molecules constituting the reaction system are explicitly included in a vibrational frequency calculation. RRKM theory with Miller's tunneling correction included is employed to calculate the rate constants. The effect of solvation causes a significant change in the chemical reaction rate, mainly through a lowering of the activation energy. The vibrational coupling causes a slight increase of the rate constant in the tunneling region by perturbing the vibrational frequencies of the reactant and transition states, which appear in the rate-constant expression, but has little effect at higher temperatures.     

TD-DFT calculations of the potential energy curves for the trans-cis photo-isomerization of protonated Schiff base of retinal

One-dimensional potential energy curves for the isomerization of protonated Schiff base of retinal (PSBR) in bacteriorhodopsin (bR), i.e., isomerization from all-trans- to 13-cis-forms, have been calculated by means of time-dependent density functional theory (TD-DFT) calculations, in order to elucidate the mechanism of initial step in photo-absorption. The transition state of the isomerization in the first excited state is located at theta(13-14)=58 degrees , where theta(13-14) means twist angle around the C(13)=C(14) double bond of PSBR The potential barrier is formed by the avoided crossing between S(1) (B(u)-like) and S(2) (A(g)-like) states. The mechanism of the isomerization was discussed on the basis of theoretical results.     

A DFT and direct MO dynamics study on the structures and electronic states of phenyl-capped terthiophene

The structures and electronic states of phenyl-capped terthiophene (denoted by P3T) and the ionic species of P3T have been investigated by means of density functional theory (DFT) and direct MO dynamics calculations. P3T is one of the high-performance molecular devices, which has been utilized as a semi-conductor. The calculations indicated that the neutral P3T has a non-planar structure whose the phenyl rings in both ends of thiophene chain are largely deviated from the molecular plane. The cation and anion radicals, dication and dianion were considered as its ionic states. The structure for cation radical of P3T is close to more planar than that of neutral P3T. The structures for anion radical, dication and dianion take a pure planar structure. The first excitation energy of neutral P3T is calculated to be 2.90 eV at the TD-B3LYP/6-31G(d)//B3LYP/6-311+G(d) level, while the P3T cation and anion radicals have lower excitation energies (1.22 and 1.10 eV, respectively). The direct MO dynamics calculation showed that neutral, cation and anion hold near planar structure at 300 K. On the other hand, oligothiophene (n = 5) and its ionic species are strongly deformed from the planar structure, and thiophene rings in both ends of chain rotate rapidly by thermal activation. The mechanism of the electron conductivity in P3T was discussed on the basis of theoretical results.