Implementation of anti-reflection coating to enhance light out-coupling in organic light-emitting devices

We report significant enhancement of light out-coupling in organic light-emitting devices (OLEDs) by means of anti-reflection coating of magnesium fluoride (MgF₂) on the backside of glass substrate. OLEDs were fabricated by employing the green electrophosphorescent material fac tris-(2-phenylpyridine) iridium [Ir(ppy)₃] doped in 4,4′,8-N,N-8-dicarbazole-biphenyl (CBP) and 0.4 wt% tetrafluorotetracyano-quinodimethane (F4-TCNQ)-doped naphthylphenylbiphenyl diamine (α-NPD) as hole transport layer (HTL). Single-layer MgF₂ with the thickness of λ/4 was then vacuum deposited on the backside of glass substrate of OLED. About two-fold enhancement in luminance with anti-reflection coating of MgF₂ has been observed.     

Electric field and temperature dependence of hole mobility in electroluminescent PDY 132 polymer thin films

The current density–voltage ($J\text{–}V$) behavior of polymer PDY 132 thin films has been investigated in hole-only device configuration, viz., ITO/poly(ethylene-dioxthiophene):polystyrenesulphonate (PEDOT:PSS)/PDY 132/Au, as a function of polymer (PDY) film thickness (150 nm and 200 nm) and temperature (290–90 K). Hole current density was found to follow two distinct modes of conduction, (i) low electric field region I: ohmic conduction where slope $～1$, and (ii) intermediate and high electric field region II: non ohmic conduction where slope $～2$. Region I has been attributed to the transport of intrinsic background charge carriers while region II has been found to be governed by space charge limited currents (SCLC) with hole mobility strongly dependent on electric field and temperature. The respective hole transport parameters determined from the SCLC regime, ${\mu }_{p0}$ is $3.7\times 10^{?3}{m}^2/Vs$, ${\mu }_p(0,T)$ is $3.7\times 10^{?8}{m}^2/Vs$, and zero field activation energy (${\Delta }_0$) of 0.48 eV is obtained.     

Immobilization and Characterization of Lactate Dehydrogenase on TEOS Derived Sol-Gel Films

Physical adsorption and physical entrapment techniques have been utilized for the immobilization of lactate dehydrogenase (LDH) on tetraethylorthosilicate (TEOS) derived sol-gel films. The enzyme (LDH) activity has been assayed as a function of time, temperature, pH and pyruvate concentration. The results of photometric measurements used for monitoring the reaction yield a response time of about 1 min, linearity over a concentration range of 0–1.5 × 10^-3 M and detection limit of 5 × 10^-5 M. The TEOS sol-gel films containing LDH have been found to be stable for about 30 days at temperatures 4 to 10°C.     

Soluble substituted poly-p-phenylenes—A new material for application in light-emitting diodes

Poly-p-phenylenes have attracted a great deal of attention with respect to their applications in displays, light-emitting devices, and batteries. However, the polymer poly-p-phenylene obtained by the Kovacic method is insoluble and intractable. The present study reports the preparation of soluble poly(p-phenylenes) by polymerization of derivatives of benzene in the presence of a specific aromatic nuclei. The resultant copolymer so obtained is soluble in common organic solvents such as chloroform and toluene. Preliminary studies have indicated that the polymer shows orange photoluminescence and electroluminescence when a potential of 7–10 V is applied to the device.     

Electrical Properties of Sol-Gel Processed Amorphous BaTiO3 Thin Films

BaTiO₃ thin films were prepared on single crystal silicon (1 0 0) and platinum substrates by sol-gel technique. Amorphous films with thickness uniformity were obtained by spinning the solution at 3000 rpm for 30 s and by post-deposition annealing at 400°C. The films exhibited good dielectric and insulating properties. The dielectric constant and dissipation factor at a frequency of 100 kHz were 17 and 0.20, respectively, for 1400 Å thick film on platinum substrate (MIM). The corresponding values were 16 and 0.015 for films on Si (MIS). Dielectric properties were also studied as functions of frequency and voltage. The C-V curve for MIS structure exhibited a hysteresis. The density of interface states recharged during the bias cycle in hysteresis measurement was estimated to be of the order of 2.10 × 10¹¹ cm^–2 and total oxide charge density was about 4.28 × 10¹¹ cm^–2. I-V measurements were performed on films of different thicknesses. The leakage current densities at 5 V for the films having thicknesses 1400 and 2800 Å were 0.86 and 0.11 A/cm² respectively. The conduction mechanism is found to be Poole-Frenkel and Schottky mechanisms at low and high fields, respectively.     

Synthesis and characterization of alternative donor-acceptor arranged poly(arylene ethynylene)s derived from 1,4-diketo-3,6-diphenylpyrrolo[3,4-c]pyrrole (DPP)

A series of donor-acceptor type poly(arylene ethynylene)s (PAEs) have been synthesized through Sonogashira polycondensation. The polymers consist of an electron donating 9,9-bis(2-ethylhexyl)-9H-fluorene, triphenylamine, 1,4-dialkoxybenzene or 9-(2-ethylhexyl)-9H-carbazole unit and an electron accepting 2,5-bis(2-ethylhexyl)-3,6-diphenylpyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione (EH-DPP) unit, alternately connected through ethynyl bridge. The polymers exhibit weight-average molecular weights (M_w) up to 68, 500 and are soluble in chlorobenzene, dichlorobenzene, THF, chloroform and toluene. A brilliant red solution with absorption maxima between 491 and 500 nm was observed for all the polymers. An intense red fluorescent with photoemission maxima between 551 and 571 nm was observed from polymer solutions. The polymers showed good thermal stability with decomposition temperature more than 260 °C at 5% weight loss. Onset oxidation potentials of the polymers were observed between 1.30 and 1.58 V with HOMO energy levels in the range of −6.10 to −6.38 eV. The OLED devices were fabricated with configuration of ITO/PEDOT:PSS/polymer/LiF/Al for all the polymers and EL maxima between 666 and 684 nm were observed.     

Experimental study of the spectral anomalies in Young’s interference experiment

We report, the experimental result of a study, conducted to investigate the spectral anomalies in the region of superposition in the Young’s double-slit interference experiment. These results are in close agreement with the theoretical study by Pu et al. (J. Pu, C. Cai S. Nemoto, Opt. Express 12 (2004) 5131). The application of this study might be useful in realizing the information transmission in free space, in optical signal processing and optical computing.     

Hyperbranched poly(arylene ethynylene)s with triphenylamine core for polymer light‐emitting diodes

A series of light‐emitting hyperbranched poly(arylene ethynylene)s (HB‐PAEs) were prepared by the Sonogashira coupling from bisethynyl of carbazole, fluorene, or dialkoxybenzenes (A₂ type) and tris(4‐iodophenyl)amine (B₃ type). For comparison, two linear polymers (L‐PAEs) of the HB analogs were also synthesized. The polymers were characterized by Fourier transform infrared, NMR, and GPC. The HB polymers showed excellent solubility in chloroform, THF, and chlorobenzene when compared with their linear analogs. The number‐average molecular weight (M_n) of the polymers determined from GPC was found to be in the range of 18,600–34,200. The polymers were thermally stable up to 298–330 °C with only 5% weight loss. The absorption maxima of the polymers were between 354 and 411 nm with optical band gap in the range of 2.5–2.9 eV. The HB polymers were found to be highly fluorescent with photoluminescence quantum yields around 33–42%. The highest occupied molecular orbital energy levels of the polymers calculated from onset oxidation potentials were found to be in the range from ?5.83 to ?6.20 eV. Electroluminescence (EL) properties of three HB‐PAEs and one L‐PAE were investigated with device configuration ITO/PEDOT:PSS/Polymer/LiF/Al. The EL maxima of HB‐PAEs were found to be in the range of 507–558 nm with turn‐on voltages around 7.5–10 V and maximum brightness values of 316–490 cd/m². At the same time, linear analog of one HB‐PAE was found to show a maximum brightness of 300 cd/m² at a turn‐on voltage of 8.2 V. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Light outcoupling efficiency enhancement in organic light emitting diodes using an organic scattering layer

Crystallized 4,7‐diphyenyl‐1,10‐phenanthroline (BPhen) films deposited by convenient vacuum thermal evaporation technique have been found to be an efficient means to extract the substrate wave guided light in organic light emitting diodes (OLEDs). The optimized BPhen film working as organic scattering layer was successfully used with OLEDs for light outcoupling efficiency improvement. Enhancement of 26%, 15% and 6% in efficiency of the blue, green and red OLEDs were obtained, respectively. The achievement was found to be advantageous in terms of simplicity of fabrication method and feasibility for large area OLED applications. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)