Catalytic behavior of decomposed molybdophosphoric acid supported on alumina for oxidative dehydrogenation of ethane to ethylene

Oxidative dehydrogenation of ethane (ODHE) to ethylene was investigated over a series of alumina supported molybdophosphoric acid (MPA) catalysts. The MPA was transformed into surface Mo oxides on Al₂O₃ when subjected to calcination at 600°C. The catalysts were characterized by N₂-adsorption, XRD, FT-IR spectroscopy and TPR techniques. The results showed that MPA loading and the source of Mo precursor had a clear influence on the catalytic performance. The evaluation of the catalysts for ODHE at temperatures between 450 and 550°C revealed superior ethane conversion (X～24%) and ethylene selectivity (S = ca. 65%) over 20 wt % MPA/Al₂O₃ catalyst. The transformation of MPA into finely dispersed Mo oxides on Al₂O₃ appeared to be responsible for this improved performance.     

Nylon Intermediates from Bio‐Based Levulinic Acid

Use of ZrO₂/SiO₂ as a solid acid catalyst in the ring‐opening of biobased γ‐valerolactone with methanol in the gas phase leads to mixtures of methyl 2‐, 3‐, and 4‐pentenoate (MP) in over 95 % selectivity, containing a surprising 81 % of M4P. This process allows the application of a selective hydroformylation to this mixture to convert M4P into methyl 5‐formyl‐valerate (M5FV) with 90 % selectivity. The other isomers remain unreacted. Reductive amination of M5FV and ring‐closure to ?‐caprolactam in excellent yield had been reported before. The remaining mixture of 2‐ and 3‐MP was subjected to an isomerising methoxycarbonylation to dimethyl adipate in 91 % yield.     

New Insights into the Nature of Co‐components and Their Impact on Pd Structure: X‐ray Absorption Studies on Toluene Acetoxylation Catalysts

Co‐components are a powerful tool to tune the performance of catalysts, but their nature and their impact on the catalysts is often controversially discussed. In this study X‐ray absorption spectroscopy (XAS) was employed to elucidate the nature of co‐components and their impact on the catalytic reaction. In anatase‐supported Pd‐based catalysts for the gas‐phase acetoxylation of toluene, less noble co‐components (e.g., Mn, Co, and Sb) spread over the support in their oxidic form and changed their valence state on stream. Incorporated atoms such as C or a small part of the Sb affect the electronic structure of Pd. For the noble Au, only a weak interaction with the support and Pd was observed during time on stream. Only XAS at the K‐edges together with investigations of the Pd L‐edge for a better understanding of the electronic structure, supplemented by STEM for elemental mapping, allow such detailed insights.     

Tuning the surface composition of novel metal vanadates and its effect on the catalytic performance

Tuning the surface composition of metal vanadates using different cations leads to the development of a new class of highly effective catalysts tested in the ammoxidation of 2-methylpyrazine. Especially, an enrichment of V in the near-surface region is beneficial for improved selectivity. With this approach, a knowledge based optimisation of the catalysts was possible for the first time, which indeed led to highly efficient novel LaVO(x) catalysts with a high yield of 2-cyanopyrazine (≥85%) and extremely high space-time-yields (ca. 525 g kg h(-1)).     

Quantifying uncertainty in the measurement of arsenic in suspended particulate matter by Atomic Absorption Spectrometry with hydride generator

Arsenic is the toxic element, which creates several problems in human being specially when inhaled through air. So the accurate and precise measurement of arsenic in suspended particulate matter (SPM) is of prime importance as it gives information about the level of toxicity in the environment, and preventive measures could be taken in the effective areas. Quality assurance is equally important in the measurement of arsenic in SPM samples before making any decision. The quality and reliability of the data of such volatile elements depends upon the measurement of uncertainty of each step involved from sampling to analysis. The analytical results quantifying uncertainty gives a measure of the confidence level of the concerned laboratory. So the main objective of this study was to determine arsenic content in SPM samples with uncertainty budget and to find out various potential sources of uncertainty, which affects the results. Keeping these facts, we have selected seven diverse sites of Delhi (National Capital of India) for quantification of arsenic content in SPM samples with uncertainty budget following sampling by HVS to analysis by Atomic Absorption Spectrometer-Hydride Generator (AAS-HG). In the measurement of arsenic in SPM samples so many steps are involved from sampling to final result and we have considered various potential sources of uncertainties. The calculation of uncertainty is based on ISO/IEC17025: 2005 document and EURACHEM guideline. It has been found that the final results mostly depend on the uncertainty in measurement mainly due to repeatability, final volume prepared for analysis, weighing balance and sampling by HVS. After the analysis of data of seven diverse sites of Delhi, it has been concluded that during the period from 31^st Jan. 2008 to 7^th Feb. 2008 the arsenic concentration varies from 1.44 ± 0.25 to 5.58 ± 0.55 ng/m³ with 95% confidence level (k = 2).     

Ultra-small cobalt nanoparticles from molecularly-defined Co–salen complexes for catalytic synthesis of amines

We report the synthesis of in situ generated cobalt nanoparticles from molecularly defined complexes as efficient and selective catalysts for reductive amination reactions. In the presence of ammonia and hydrogen, cobalt–salen complexes such as cobalt(ii)–N,N′-bis(salicylidene)-1,2-phenylenediamine produce ultra-small (2–4 nm) cobalt-nanoparticles embedded in a carbon–nitrogen framework. The resulting materials constitute stable, reusable and magnetically separable catalysts, which enable the synthesis of linear and branched benzylic, heterocyclic and aliphatic primary amines from carbonyl compounds and ammonia. The isolated nanoparticles also represent excellent catalysts for the synthesis of primary, secondary as well as tertiary amines including biologically relevant N-methyl amines.

We report the synthesis of in situ generated cobalt nanoparticles from molecularly defined complexes as efficient and selective catalysts for reductive amination reactions.     

Structural characteristics of different types of nanoparticles synthesised in mesomorphic metal alkanoates

The class of thermotropic ionic liquid crystals (LCs) of the metal alkanoates possesses a number of unique properties, such as intrinsic ionic conductivity, high dissolving ability and ability to form time-stable mesomorphic glasses. These ionic LCs can be used as nanoreactors for the synthesis and stabilisation of different types of nanoparticles (NPs). Thus, some semiconductors, metals and core/shell NPs were chemically synthesised in the thermotropic ionic liquid crystalline phase (smectic A) of the cadmium octanoate (CdC₈) and of the cobalt octanoate (CoC₈). By applying the scanning electron microscopy, the cadmium and cobalt octanoate composites containing CdS, Au, Ag and core/shell Au/CdS NPs have been studied. NPs’ sizes and dispersion distribution of the NPs’ size in the nanocomposites have been obtained.