Study of fiber optic sugar sensor

Over the last two decades, the fiber optic technology has passed through many analytical stages. Some commercially available fiber optic sensors, though in a small way, are being used for automation in mechanical and industrial environments. They are also used for instrumentation and controls. In the present work, an intensity-modulated intrinsic fiber optic sugar sensor is presented. This type of sensor, with slight modification, can be used for on-line determination of the concentration of sugar content in sugarcane juice in sugar industry. In the present set-up, a plastic fiber made of polymethylmethacrylate is used. A portion of the cladding (1 cm, 2 cm, 3 cm) at the mid-point along the length of the fiber is removed. This portion is immersed in sugar solution of known concentration and refractive index. At one end of the fiber an 850 nm source is used and at the other end a power meter is connected. By varying the concentration of sugar solution, the output power is noted. These studies are made due to the change in refractive index of the fluid. The device was found to be very sensitive which is free from EMI and shock hazards, stable and repeatable and they can be remotely interfaced with a computer to give on-line measurements and thus become useful for application in sugar industries.     

Ethylene- ando-phenylenediamine-N,N′-bis(dimethylmethylenephosphonic) acids as complexing agents

Summary Ethylene- ando-phenylene-diamine-N, N-bis(dimethylmethylenephosphonic) acids form polymeric complexes of general formula M₂L · xH₂O (M = Mn^II, Co^II, Ni^II, Cu^II, Zn^II, Cd^II or Pb^II; x=2 or 4). These have octahedral geometry and are polymeric, according to i.r. (far and near) and electronic spectral data and magnetic moment and thermogravimetric studies. The ligands are thought to be tetradentate for each metal atom, coordination taking place through phosphoryl oxygen and amino-group nitrogen.     

Simultaneous Determination of Olanzapine and Fluoxetine by HPLC

A rapid, specific reversed phase HPLC method has been developed for simultaneous determination of olanzapine and fluoxetine in their formulations. Chromatographic separation of these two pharmaceuticals was carried out on an Inertsil C₁₈ reversed phase column (150 mm × 4.6 mm, 5 μm) with a 40:30:30 (v/v/v) mixture of 9.5 mM sodium dihydrogen phosphate (pH adjusted to 6.8 ± 0.1 with triethylamine), acetonitrile and methanol as mobile phase. The flow rate 1.2 mL min⁻¹ and the analytes are monitored at 225 nm. Paroxetine was used as internal standard. The assay results were linear from 25 to 75 μg mL⁻¹ for olanzapine (r ² ≥ 0.995) and 100–300 μg mL⁻¹ for fluoxetine (r ² ≥ 0.995), showed intra- and inter-day precision less than 1.0%, and accuracy of 97.7–99.1% and 97.9–99.0%. LOQ was 0.005 and 0.001 μg mL⁻¹ for olanzapine and fluoxetine, respectively. Separation was complete in less than 10 min. Validation of the method showed it to be robust, precise, accurate and linear over the range of analysis.     

A versatile and efficient synthesis of (2S)-2-(hydroxymethyl)-N-Boc-2,3-dihydro-4-pyridone

A versatile and efficient method for the preparation of (2S)-2-(hydroxymethyl)-N-Boc-2,3-dihydro-4-pyridone from l-(−)-phenylalanine 2 utilising the aromatic system as a masked β-keto aldehyde was developed. The key step in the sequence is an intramolecular cyclisation of 6 to give 2,3-dihydropyridin-4-ones.     

Nickel phthalocyanine sulphonic acid as a redox indicator in cerimetry

Summary The use of nickel phthalocyanine sulphonic acid (Ni-PS) as an internal indicator in the cerimetric titration of iron(II) has been investigated. 0.2 ml of a 0.05% solution of the dye serves well as a redox indicator in 50 ml of the titration mixture. The colour change at the end point is from blue to violet. The addition of about 2.5 ml of syrupy phosphoric acid to 50 ml of the titration mixture has been found to be advantageous as it increases the life period of the violet coloured transitory oxidation product of Ni-PS. The Ni-PS indicator is superior to the Cu-PTS indicator previously reported, in that the intermediate violet oxidation product obtained with the former at the equivalence point has a longer life period.It has been observed that in the cerimetric titration of 3–8 ml of about 0.1 N uranium(IV) diluted to 50 ml, the equivalence point is marked by a colour change from turquois blue to colourless, without the appearance of any intermediate violet colour. However, the intermediate violet colour appears, if 3 ml of syrupy phosphoric acid is added before the start of the titration. In the titration of more dilute solutions of uranium(IV) the indicator gives premature and hazy end points. How-ever, in the presence of phosphoric acid, correct equivalence points are obtained.The cerimetric titration of molybdenum(V) using Ni-PS as indicator is recommended to be carried out in 2 N sulphuric acid medium. The addition of phosphoric acid is not necessary. The colour change at the equivalence point is from turquois blue to violet which is stable for 10–15 sec.

---

Zusammenfassung Nickel-phthalocyanin-sulfonsäure (NPS) kann als Indicator bei der cerimetrischen Titration von Eisen(II), Uran(IV) und Molybdän(V) mit gutem Erfolg verwendet werden. Auf 50 ml Titrationslösung benötigt man 0,2 ml einer 0,05%igen Lösung des Indicators. Der Farbumschlag am Endpunkt erfolgt von Blau nach Violett. Ein Zusatz von 2,5 ml sirupöser Phosphorsäure auf 50 ml Lösung ist vorteilhaft, da er die Lebensdauer des violett gefärbten Zwischenproduktes der Oxydation von NPS erhöht. Der NPS-Indicator ist wegen der längeren Beständigkeit des erwähnten Zwischenproduktes der früher beschriebenen Kupferphthalocyanin-tetrasulfonsäure überlegen.Bei der cerimetrischen Titration von 3–8 ml ungefähr 0,1 n Uran (IV)-lösung, die auf 50 ml verdünnt wurde, erhält man einen Farbumschlag von Türkisblau nach Farblos, ohne daß das Violett gefärbte Zwischen-produkt auftritt. Wenn man jedoch vor der Titration 3 ml sirupöse Phosphorsäure zusetzt, so erscheint die violette Farbe. Bei der Titration verdünnterer Lösungen ergeben sich vorzeitige und unklare Farbum-schläge. Doch führt auch hier ein Zusatz von Phosphorsäure zu richtigen Werten.Die Titration von Molybdän (V) mit dem beschriebenen Indicator wird am besten in 2n schwefelsaurer Lösung ausgeführt, wobei ein Phosphorsäurezusatz nicht erforderlich ist. Der Farbumschlag erfolgt von Türkisblau nach Violett (Beständigkeit 10–15 sec).

     

Aluminum chloride-induced heteroarylation of arenes and heteroarenes. 2. A new synthesis of 4-substituted phthalazin-1(2H)-ones

We herein report the efficient syntheses of 4-(hetero)aryl-substituted 1-chlorophthalazines via heteroarylation of arenes/heteroarenes through AlCl(3)-induced C[bond]C formation reactions. A number of (hetero)arenes were reacted with 1,4-dichlorophthalazine to give aryl/heteroaryl-substituted phthalazines in good to excellent yields. Many of them were converted to the corresponding phthalazin-1(2H)-ones.     

On [Fe4S4]2+ -(mu2-SR)-M II bridge formation in the synthesis of an A-cluster analogue of carbon monoxide dehydrogenase/acetylcoenzyme A synthase

The construction of a synthetic analogue of the A-cluster of carbon monoxide dehydrogenase/acetylcoenzyme synthase, the site of acetylcoenzyme A formation, requires as a final step the formation of an unsupported [Fe(4)S(4)]-(mu(2)-SR)-Ni(II) bridge to a preformed cluster. Our previous results (Rao, P. V.; Bhaduri, S.; Jiang, J.; Holm, R. H. Inorg. Chem. 2004, 43, 5833) and the work of others have addressed synthesis of dinuclear complexes relevant to the A-cluster. This investigation concentrates on reactions pertinent to bridge formation by examining systems containing dinuclear and mononuclear Ni(II) complexes and the 3:1 site-differentiated clusters [Fe(4)S(4)(LS(3))L'](2-) (L' = TfO(-) (14), SEt (15)). The system 14/[{Ni(L(O)-S(2)N(2))}M(SCH(2)CH(2)PPh(2))](+) results in cleavage of the dinuclear complex and formation of [{Ni(L(O)-S(2)N(2))}Fe(4)S(4)(LS(3))]- (18), in which the Ni(II) complex binds at the unique cluster site with formation of a Ni(mu(2)-SR)(2)Fe bridge rhomb. Cluster 18 and the related species [{Ni(phma)}Fe(4)S(4)(LS(3))](3)- (19) are obtainable by direct reaction of the corresponding cis-planar Ni(II)-S(2)N(2) complexes with 14. The mononuclear complexes [M(pdmt)(SEt)]- (M = Ni(II), Pd(II)) with 14 in acetonitrile or Me(2)SO solution react by thiolate transfer to give 15 and [M(2)(pdmt)(2)]. However, in dichloromethane the Ni(II) reaction product is interpreted as [{Ni(pdmt)(mu(2)-SEt)}Fe(4)S(4)(LS(3))](2-) (20). Reaction of Et(3)NH(+) and 15 affords the double cubane [{Fe(4)S(4)(LS(3))}(2)(mu(2)-SEt)](3-) (21). Cluster 18 contains two mutually supportive Fe-(mu(2)-SR)-Ni(II) bridges, 19 exhibits one strong and one weaker bridge, 20 has one unsupported bridge (inferred from the (1)H NMR spectrum), and 21 has one unsupported Fe-(mu(2)-SR)-Fe bridge. Bridges in 18, 19, and 21 were established by X-ray structures. This work demonstrates that a bridge of the type found in the enzyme A-clusters is achievable by synthesis and implies that more stable, unsupported single thiolate bridges may require reinforcement by an additional covalent linkage between the Fe(4)S(4) and nickel-containing components. (LS(3) = 1,3,5-tris((4,6-dimethyl-3-mercaptophenyl)thio)-2,4,6-tris(p-tolylthio)benzene(3-); L(O)-S(2)N(2) = N,N'-diethyl-3,7-diazanonane-1,9-dithiolate(2-); pdmt = pyridine-2,6-methanedithiolate(2-); phma = N,N'-1,2-phenylenebis(2-acetylthio)acetamidate(4-); TfO = triflate.).     

Stereoselective total synthesis of (−)-zeylenol,a key intermediate for the synthesis of (+)-pipoxide, (−)-uvarigranol G and (−)-tonkinenin A

Total synthesis of (?)-zeylenol, a key intermediate for the synthesis of (+)-pipoxide, (?)-uvarigranol G and (?)-tonkinenin A was achieved from commercially available starting material d-mannose. The key steps are mixed aldol condensation, Grignard reaction, ring closing metathesis and regioselective benzoylation.     

Preferential Reactivity of Pyridylmagnesiumchloride with N,N-Dialkyl Arylamides over Carbonitriles: Synthesis of 2-(Aroyl) Pyridines

Reaction of 2-pyridylmagnesium chlorides with N,N-dialkyl arylamides afford exclusively 2-(aroyl) pyridines in high yields and purity without the formation of any tertiary alcohol. This method employs easily available raw materials and avoids the use of hazardous lithium reagents and cryogenic conditions. Further, preferential reactivity of this Grignard reagent with N,N-dialkyl arylamides over its carbonitrile counterparts offers a variety of 2-(aroyl) pyridines including the ones containing carbonitrile groups on the aryl ring.