Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Identification of the commonest cystic fibrosis transmembrane regulator gene DeltaF508 mutation: evaluation of PCR--single-strand conformational polymorphism and polyacrylamide gel electrophoresis

In the present study we investigated whether single-strand conformational polymorphism (SSCP) and polyacrylamide gel electrophoresis (PAGE) could be used for the identification of the CFTR DeltaF508 gene mutation, which is commonest in the Greek population. Using DNA from patients carrying this mutation, the appropriate 98 bp region of the CFTR gene was amplified by PCR and the reaction products were analysed by non-radioactive SSCP-electrophoresis using silver staining for band visualization and non-denaturating PAGE to confirm the results. SSCP electrophoretic analysis has been optimized for several parameters in order to achieve the best resolution. Single-strand DNA fragments gave a reproducible pattern of bands, characteristic for the particular mutation. Comparison of the obtain patterns with control samples allowed the detection of the DeltaF508 mutation in the patients studied by SSCP assay and these results were confirmed by the independent method of PAGE. Although SSCP and PAGE can be used for detection of this mutation, PAGE resulted in more distinct patterns than SSCP. It is, therefore, proposed that PAGE can be reliably used for the detection and identification of such a mutation in patients provided that suitable controls are available. The applicability of PAGE to identification of the mutation in carriers, particularly useful for population screening, is also discussed.     

Synthetic magnetic opals

We present studies of novel nanocomposites of BiNi impregnated into the structure of opals as well as inverse opals. Atomic force microscopy and high resolution elemental analyses show a highly ordered structure and uniform distribution of the BiNi filler in the matrix. These BiNi-based nanocomposites are found to exhibit distinct ferromagnetic-like ordering with transition temperature of about 675 K. As far as we know there exists no report in literature on any BiNi compound which is magnetic.     

Magnetization curves for general cylindrical samples in a transverse field

Using the recent results for the surface current density on cylindrical surfaces of arbitrary cross-section producing uniform interior magnetic field we propose a method for obtaining solutions of Bean’s critical state model for general cylindrical samples. The method uses the technique of conformal mapping to express the sample surface and the flux-fronts in terms of a set of coefficients that depend on a parameter. The flux-fronts are to be determined by solving a system of nonlinear ordinary differential equations for the coefficients. Retaining only a certain finite number of leading coefficients we get an approximate solution. The procedure is illustrated by considering two cyclindrical samples — one with an elliptical cross-section and the other with a non-elliptical cross-section. The virgin curve and small and large magnetization hysteresis loops for the two samples are obtained.     

Low-field vortex dynamics in various high-T c thin films

We present a novel ac susceptibility technique for the study of vortex creep in superconducting thin films. With this technique we study the dynamics of dilute vortices in c-axis oriented Y-123, Hg-1212, and Tl-1212 thin films, as well as a axis oriented Hg-1212 thin films. Results on the Hg-1212 and Tl-1212 thin films indicate that dislocation-mediated plastic flux creep of single vortices dominates at low temperatures and fields. As the temperature (or the field) is increased, the increasing vortex-vortex interactions promote a collective behavior, which can be characterized by elastic creep with a non-zero μ exponent. Also, in some of these samples effects of thermally assisted quantum creep are visible up to 45 K in some of these samples. In Y-123 thin films, creep is found to be collective down to the lowest temperatures and fields investigated, while the quantum creep persists only up to 10–11 K.     

Mechanical properties of propellant composite materials reinforced with ammonium perchlorate particles

The purpose of this article is the theoretical interpretation of the experimental data on a continuum Neoprene binder, a glass bead-filled polyurethane binder, and unbound micropulverized ammonium perchlorate particles. After conducting stress relaxation and creep experiments, it is concluded that the large deformation behavior of the filled binder can be described in part in terms of the large deformation behavior of the continuum binder. The time scale of relaxation of stress in the filled binder is much longer than that of the unfilled binder. This has been determined by frictional processes which took place between the filler and the binder as well as among the filler particles. As a result of relaxation and creep studies on ammonium perchlorate (AP) particles, it has been found that the time scale of relaxation is of the same order of magnitude as that of the filler binder. In addition, it is believed that the static indeterminacy of the unbound particles helps to explain much of the strain variation at given stress level that is observed in tensile experiments of composite propellants.     

Magnetization curves for non-elliptic cylindrical samples in a transverse field

Using recent results for the surface current density on cylindrical surfaces of arbitrary cross-section producing uniform interior magnetic field and an assumed set of flux-fronts, solutions of Bean’s critical state model for cylindrical samples with non-elliptic cross-section are presented. Magnetization hysteresis loops for two cross-sections with different aspect ratios are obtained. A comparison with some exact results shows the limitations of this approach.     

Numerical simulation of interfacial debonding in particulate composites considering material inhomogeneities

A comparative study in the framework of large deformations has been conducted to get insight into micro mechanical response of particulate polymeric composites. The propound model enables finite element predictions of displacement response and resulting debonding of a three-phase material subjected to incremental loading conditions. Predictions employ a unit cell of certain shape under specified loading and constraints. The proposed model involves nonlinear material properties and incorporates a strong or weak non-homogeneous interphase region. The interphase toughness is expressed in terms of the adhesion efficiency between the filler and the matrix, though contact conditions are preserved utilizing special contact elements. Interfacial nonlinear spring joint elements regulate debonding initialization, in relation to the imposed failure criterion. Numerical results are presented and discussed for axial tensile and compressive loadings for a variety of values of the imposed parameters.