Structure and Electrochemical Behavior of Lithium-Manganese Spinels Doped with Chromium and Nickel

A series of compounds with the general formula LiMn_{2 - x - y} Cr _x Ni _y O₄, where x + y = 0.05, 0.5, or 1.0, is synthesized. It is shown that all these compounds are pure-phase spinels with parameter aequal to 0.8193-0.8236 nm. Doping a stoichiometric lithium-manganese spinel simultaneously with chromium and nickel makes the spinel structure stable. The initial specific capacity of a spinel depends on its doping degree. Doping LiMn₂O₄ with chromium and nickel simultaneously at an Mn : Cr : Ni ratio of 195 : 3 : 2 raises the spinel's specific capacity and reduces the cycling degradation. The change in the discharge capacity of LiMn_1.95Cr_0.03Ni_0.02O₄ electrodes cycled at 20, 0, and -14°C is determined.     

Cathodic materials for lithium-ion batteries based on spinels Li x Mn2−y Me y O4: Synthesis, phase composition, and structure of Li x Mn2−y Cr y O4 at x = 1.0−1.2 and y = 0−0.5

Extralithiated chromium-doped finely divided lithium-manganese spinels are synthesized as a result of a two-step solid-phase process with use made of the fusion-saturation method. The spinels are intended for application as cathodic materials in lithium-ion batteries. The phase composition and structural characteristics of samples of cathodic materials of the type Li _x Mn_2?y Cr _y O₄ are studied. The samples with x = 1.0?1.2 and y = 0?0.5 are characterized by phase purity and cubic syngony with parameter a = 0.817?0.823 nm and a disperseness equal to 1–2 nm. The maximum content of chromium and lithium in Li _x Mn_2?y Cr _y O₄ that does not lead to violation of cubic syngony is determined. Lithium excess in the cathodic material that does not exceed 0.2 formula units may be used for compensating the irreversible capacity. Replacing some manganese atoms by chromium may facilitate retention of the structures’s integrity in the course of cycling.     

Electrochemical properties of LiMn<Subscript>2−<Emphasis Type="Italic">y</Emphasis></Subscript>Me<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>O<Subscript>4</Subscript> (Me = Cr,Co, Ni) spinels as cathodic materials for lithium-ion batteries

A number of spinel phases with a general formula LiMn_2?y Me _y O (Me = Cr, Co, Ni) was synthesized using the melt-impregnation and sol-gel methods. All synthesized materials were subjected to electrochemical testing of their suitability as cathodes in lithium-ion batteries. Cyclic voltammograms were used in the testing. The cathode materials prepared using the melt-impregnation method showed the highest initial discharge capacity (up to 120 mA h/g) and stable operation during the cycling. The partial substitution of chromium and cobalt atoms for manganese gives positive effect: the spinel structure is stabilized during the cycling. The double doping of the Li-Mn-O system with small amounts of Co and Ni results in the stabilizing of the discharge capacity. An overstoichiometry excess of lithium in Co- or Cr-doped spinels also favors the increasing of the discharge capacity and slows down its decaying during the cycling.