Synthesis and Structure Determination of Some New N‐Glycosides of 4,5‐Disubstituted‐1,2,4‐Triazole‐3‐Thiones

Some new N‐glycosides of 4‐(2‐phenylethyl)‐5‐pyridyl‐1,2,4‐triazole‐3‐thiones were synthesised by the coupling reaction of halo sugar with 4,5‐disubstituted 3H‐1,2,4‐triazole‐3‐thiones in the presence of mercuric cyanide and dry nitromethane as solvent, followed by deprotection using dry ammonia in methanol. All of the above compounds were fully characterized by means of infrared, ¹H NMR spectroscopy, mass spectroscopy and elemental analysis.     

Thermally Stable and Organo-soluble Polyamides Containing Triazine Rings and Ether Linkages in the Main Chain: Synthesis and Characterization

In order to synthesize new polyamide(PA) 5 and copolyamides(Co PA) 7a-7d, a new-type of dicarboxylic acid containing triazine ring was successfully synthesized from 2,4-dichloro-6-methoxy-s-triazine 1 and 4-aminobenzoic acid. New polyamide 5 containing triazine moiety was prepared from 4,4'-(6-methoxy-1,3,5-triazine-2,4-diyl)bis(azanediyl)dibenzoic acid 3 and 4,4′-diaminodiphenylether by direct polycondensation reaction. Then new series thermally stable copolyamides 7a-7d with high solubility in common organic solvents were synthesized from the direct polycondensation reaction of diacid 3 as a first monomer, aliphatic-aromatic diacids 6a-6d as second diacids and 4,4′-diaminodiphenylether. All of the above polymers were fully characterized by 1H-NMR and FTIR spectroscopy, elemental analysis(CHN), inherent viscosity, solubility tests, gel permeation chromatography(GPC), differential scanning calorimetry(DSC) and thermogravimetric analysis(TGA). The resulted Co PAs 7a-7d have shown good inherent viscosities, solubility and thermal properties.     

Preparation and Characterization of New Optically Active Poly(amide-imide)s from N,N′-(bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetra carboxylic)-bis-L-isoleucine and Aromatic Diamines

Five new optically active aromatic poly(amide-imide)s (PAIs) 5a–e were prepared from a direct polycondensation reaction of a new diacid of N,N′-(bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetra carboxylic)-bis-L-isoleucine 3 with various aromatic diamines 4a–e in a medium consisting of triphenyl phosphite (TPP), calcium chloride (CaCl₂), pyridine (Py) and N-methyl-2-pyrrolidone (NMP). The polycondensation reaction produced a series of novel poly(amid-imide)s 5a–e in quantitative yields with inherent viscosities of 0.39–0.51 dL/g. The resulting polymers were fully characterized by means of ¹H-NMR, FT-IR spectroscopy, elemental analyses, inherent viscosity, solubility test, specific rotation and thermal properties of them were investigated using TGA/DTG and differential scanning calorimeter (DSC). The diacid 4 was synthesized by the condensation reaction of bicyclo[2,2,2]oct-7-ene-2,3,5,6- tetracarboxylic dianhydride 1 with L-isoleucine 2 in acetic acid solution.     

A Novel Method for Permeability Estimation from Micro-tomographic Images

Transport in Porous Media - A methodology has been developed to create a pore network model (PNM) from the geometrical/topological information extracted from the micro-tomographic images of a...     

Synthesis and characterization of optically active polyamides based on 2-(1,3-isoindolinedione-2-yl)glutaric acid by direct polycondensation

<正>Five new optically active polyamides(PAs) 6a-6e were prepared by direct polycondensation reaction of 2-(1,3- isoindolinedione-2-yl)-glutaric acid 4 as a new chiral diacid with various aromatic diamines 5a-5e in a medium consisting of triphenyl phosphite(TPP),calcium chloride,pyridine(Py) and N-methyl-2-pyrrolidone(NMP).The polycondensation reaction produced a series of polyamids 6a-6e in quantitative yields with inherent viscosities of 0.26-0.39 dL/g.The resulting polymers were fully characterized by means of ~1H-NMR,FT-IR spectroscopy,elemental analysis,inherent viscosity and specific rotation.Thermal properties of these polymers were investigated using thermal gravimetric analysis (TGA) and differential thermal gravimetry(DTG).Phthalimide rings as a bulky pendent group in the polymer chains disturb the interchain and intrachain interactions and make these PAs readily soluble in polar,aprotic solvents such as N,N-dimethyl acetamide(DMAc),N,N-dimethyl formamide(DMF),dimethyl sulfoxide(DMSO),N-methyl-2-pyrrolidone(NMP) and sulfuric acid.     

Synthesis and characterization of optically active poly(amide-imide)s containing photosensitive chalcone units in the main chain

<正>A series of new optically active poly(amide-imide)s were synthesized by direct polycondensation reaction of 4,4'-diaminochalcone with several N-trimellitylimido-L-amino acids using a tosyl chloride(TsCl),pyridine(Py) and dimethylformamide(DMF) system as condensing agent.The resulting thermally stable poly(amide-imide)s were obtained in good to high yields and inherent viscosities ranging between 0.35 dL/g and 0.58 dL/g and were characterized with FTIR, ~1H-NMR,CHN,Ultraviolet,TGA and DTG techniques.     

Copper-doped silica cuprous sulfate (CDSCS) as a highly efficient heterogeneous nano catalyst for synthesis of 3,5-disubstituted isoxazoles

A facile and highly efficient protocol for 1,3-dipolar cycloaddition of in situ generated nitrile oxides with terminal alkynes catalyzed by copper-doped silica cuprous sulfate (CDSCS) as a new and convenient heterogeneous nano catalyst is described. In this protocol, ‘click’ cycloaddition of various structurally diverse alkynes and imidoyl chlorides in the presence of CDSCS and NaHCO₃ in a solution of i-PrOH/H₂O (1:1, V/V) furnishes the corresponding 3,5-disubstituted isoxazoles in good to excellent yields at room temperature. CDSCS was approved as a chemically and thermally stable nano catalyst that can be recovered and reused for many consecutive trials without considerable decline in its reactivity.     

Magnetic and Heat Resistant Poly(imide-ether) Nanocomposites Derived from Methyl Rich 9<Emphasis Type="Italic">H</Emphasis>-xanthene: Synthesis and Characterization

In this study a new series of magnetic and heat resistant nanocomposites were prepared based on a highly soluble poly(imide-ether) (PIE) reinforced with two different types of magnetic nanoparticles via a solution intercalation technique. New PIE with good solubility and desired molar mass containing bulky xanthene rings and amide groups in the side chains was synthesized via thermal cyclization of the poly(amic acid) precursor, obtained from the reaction of a new diamine derived from 9H-xanthene and 4,4′-oxydiphthalic dianhydride (ODPA). Improved solubility was attributed to the presence of xanthene group and flexible ether linkage in the polyimide backbones that reduce the chain-chain interaction and enhance solubility by penetrating solvent molecules into the polyimide chains. Fe₃O₄ nanoparticles (MNPs) which synthesized from chemical co-precipitation route were coated with silica (SiO₂), sequentially with (3-aminopropyl)triethoxysilane and poly-melamine-terephthaldehyde (MNPs-PMT), and then separately dispersed in the poly(amic acid) solutions and thermally imidized to form PIE/Fe₃O₄ and PIE/MNPs-PMT nanocomposites. The nanostructures and properties of the resultant materials were investigated using FTIR spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The properties of the nanocomposites were strongly related to the dispersion and interaction between the nanoparticles and PIE matrix. The thermogravimetric analysis (TGA) results showed that the addition of MNPs-PMT nanoparticles resulted in a substantial increase in the thermal stability of the corresponding PIEN. The temperature at 10% weight loss (T₁₀) was increased from 416 °C to 428 °C for PIEN containing 3 wt% MNPs-PMT as compared to neat PIE, as well the char yield enhanced. Furthermore, the MNPs-PMT nanoparticles had better dispersion in the polymer matrix due to the strong intermolecular hydrogen bond interactions between the NH and C=N groups of surface-modified nanoparticles and the PIE matrix than the uncoated Fe₃O₄ nanoparticles, and exhibited a better intercalated morphology and improved thermal properties. Also, the PIEN nanocomposites under applied magnetic field exhibited the hysteretic loops of the superparamagnetic nature.     

New Transition and Actinide Metal Complexes of 2‐Carboxy‐phenylhydrazo‐Benzoylacetone Ligand: Synthesis,Characterization and Biological Study

A new series of binary mononuclear complexes were prepared from the reaction of the hydrazone ligand, 2-carboxyphenylhydrazo-benzoylacetone (H2L), with the metal ions, Cd(II), Cu(II), Ni(II), Co(II), Th(IV) and UO2(VI). The binary Cu(II) complex of H2L was reacted with the ligands 1,10-phenanthroline or 2-aminopyridine to form mixed-ligand complexes. The binary complexes of Cu(II) and Ni(II) are suggested to have octahedral configurations. The Cd(II) and Co(II) complexes are suggested to have tetrahedral and/or square-planar geometries, respectively. The Th(IV) and UO2(VI) complexes are suggested to have octahedral and dodecahedral geometries, respectively. The mixed-ligand complexes have octahedral configurations. The structures of all complexes and the corresponding thermal products were elucidated by elemental analyses, conductance, IR and electronic absorption spectra, magnetic moments, 1H NMR and TG-DSC measurements as well as by mass spectroscopy. The ligand and some of the metal complexes were found to activate the enzyme pectinlyase.