DETECTION OF DNA-PSORALEN PHOTOADDUCTS in situ

Abstract— An immunological method, with the use of specific immune serum, has been developed for detection of 8-methoxypsoralen (8-MOP) photoadducts to DNA, formed in situ in cell nuclei, after combined treatment with 8MOP and UV-A irradiation (Zarçbska et al. , 1978). Lymphocytes fixed on slides or in suspension, and cryostat sections of different mammalian tissues, served as antigenic substrate, after treatment with 8-MOP and UV-A in vitro. Specific fluorescence in these substrates was detected in the nuclei after treatment with 30 ˜ 140 kJ/m² UV-A in the presence of 0.1-0.3 μg/cm² 8-MOP. PHA-stimulated-lymphocytes appeared to be the most sensitive substrate.
However, hairless mice treated with high doses of UV-A in vivo , 70 ˜ 360 kJ/m² did not reveal a specific fluorescence of epidermal nuclei, unless a high local concentration of 8-MOP was attained.
The apparent discrepancy in the level of photoadduct detection between the in vitro and in vivo treated specimens was explained by the low number of DNA-8-MOP-photoadducts formed in vivo under these experimental conditions. The relevance of these findings to the role of DNA-8-MOP-photoadducts formed during PUVA photochemotherapy is discussed.     

ON QUOTIENTS OF BRAID GROUPS

ABSTRACT.

Let G be the group ?[t, t ^?1] x ?. By studying the action of the braid group B_n on the set Gⁿ , we obtain representations of B_n into a wreath product of the symmetric group and the general linear group over ?[t, t ^?1]. This in particular recovers the Burau representation of the braid group. Furthermore, some quotients of the braid group are obtained by using the representations found.     

Characterization of partially transesterified poly(beta-hydroxyalkanoate)s using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) was used for the characterization of a partially transesterified poly(beta-hydroxyalkanoate), PHA, polymer produced by the bacterial strain Alcaligenes eutrophus using saponified vegetable oils as the sole carbon sources. The transesterification was carried out separately under acidic and basic conditions to obtain PHA oligomers weighing less than 10 kDa. The intact oligomers were detected in their cationized [M + Na](+) and [M + K](+) forms by MALDI-TOFMS. A composition analysis, using the MALDI-TOF spectra, indicate that the oligomers obtained via acid catalysis were terminated with a methyl 3-hydroxybutyrate end group, and those obtained by base catalysis had a methyl crotonate (olefinic) termination. In addition to HB (hydroxy butyrate), the oligomers were found to contain a small percentage of HV (hydroxy valerate). This was independently confirmed using gas chromatography/mass spectrometry (GC/MS). In comparison, the analysis of a commercial PHA polymer, transesterified under identical conditions, only showed the presence of HB, i.e. a pure PHB homopolymer. Copyright 1999 John Wiley & Sons, Ltd.     

Acoustic determination of polymer molecular weights and rotation times

An acoustic waveguide device was shown to be sensitive to the molecular weight of poly(ethylene glycol) in solution over a molecular weight range determined by the operating frequency of the device. The acoustic device used generates a shear wave with displacement in the plane of the device surface and normal to the direction of propagation. Liquid over the device exhibits viscous coupling to the oscillating surface, affecting propagation of the acoustic wave. The propagation loss was shown to be directly proportional to the weight percentage of the solute. For a given weight percent of polymer in solution, the loss increased with increasing molecular weight until a maximum loss value was reached; this may be due to the fact that rotational times for polymer molecules increase with molecular weight until they reach a point at which the rotation is limited by the oscillation time on the device surface. The molecular weight at which the maximum loss value was attained was 10,000 g/mol for a device operating at 104 MHz and 3350 g/mol for a device operating at 331 MHz, implying a rotational time of 1 ns for each 2200 increase in molecular weight. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1490–1495, 2002     

More efficient Brownian dynamics algorithms

We examine the relative efficiencies of three- algorithms for performing Brownian Dynamics simulations without many-body hydrodynamics. We compare the conventional Brownian Dynamics algorithm of Ermak (CBD), Smart Monte Carlo (SMC) which incorporates Boltzmann sampling into essentially a CBD procedure, and the Stochastic Runge Kutta (SRK) method. We show, using the repulsive potential φ(r) = ε(σ/r) ⁿ , where n = 36 and 72, that the SRK algorithm gives the most accurate short-time dynamics for the mean-square displacements. The SRK algorithm static and dynamical properties converge better with a reducing time step to the exact values, than those generated by the CBD algorithm; giving efficiency gains typically of a factor of 3–4. Both CBD and SMC have the incorrect sign for the first correction term to the mean square displacement in a time step, whereas the SRK algorithm gives essentially the exact solution to order Δt ², where Δt is the simulation time step. In fact, these correction terms are almost equal and opposite in sign. Expressions for these terms were derived in terms of the average interaction energy per particle. The force, shear and bulk stress autocorrelation functions were calculated. The average energy per particle and time correlation functions at short time have values in excess of the exact values, while the corresponding quantities for SRK are below this. This difference in behaviour can be traced back to the extent of compliance of the particle trajectories with the exact expansion of the Smoluchowski equation. The accuracy, at a given value of the time step, of the stochastic algorithms can significantly depend on the form of the interaction potential between particles. It is also demonstrated that the long time limits of various correlation functions are fairly insensitive to a particular scheme (SRK or CBD) used in the simulations. All the correlation functions have a stretched exponential region at intermediate to long times, and the values of the exponents on density and force law steepness have been determined.     

Semi-empirical relationships between effective mobility,charge, and molecular weight of pharmaceuticals by pressure-assisted capillary electrophoresis: applications in drug discovery

Relationships between effective mobility (m(eff)), calculated charge (Z(c)), and molecular weight (MW) are semi-empirically derived for pharmaceuticals using pressure-assisted capillary electrophoresis (PACE). We determined the m(eff) at 12 different pH points (2.0-11.4) of 66 pharmaceutical-like compounds ranging in MW from 79 to 825 g/mol. Plots of the observed m(eff) values versus Z(c)/MW(x ) (where x is a fractional coefficient) gave linear relationships. For anions, it was found that the best correlation (R(2) = 0.9666) exists when the fractional coefficient is equal to 0.4920, resulting in the equation m(eff) = 0.1853 (Z(c)/MW (0.4920)). For cations, the best linear relationship (R(2) = 0.9861) gave the equation m(eff) = 0.3888 (Z(c)/MW (0.6330)). The m(eff), Z(c)/MW(x) relationships were then applied to: (i) developing a technique for selecting an appropriate pH to achieve optimal separation of pharmaceuticals and (ii) determining the maximum charge of a molecule in the pH range of determination of negative log of the dissociation constants (pK(a)) by PACE, thus enabling the correct choice of model equation to be automated without structure analysis.     

Simultaneous measurement of mechanical and surface properties in thermoresponsive, anchored hydrogel films

Hydrogel films have been used extensively in the preparation of biosensors and biomedical devices. The characteristics of the aqueous interface of the polymer layer are significant for the biosensor or device function; likewise, the changing mechanical properties of thermoresponsive polymers are an important feature that affects the polymer behavior. Atomic force microscopy was used here to characterize both the surface and the mechanical properties of polymeric hydrogel films prepared from a thermoresponsive terpolymer of N-isopropylacrylamide and acrylic acid with benzophenonemethacrylate as a photoreactive cross-linker comonomer. The force-distance curves thus obtained were analyzed to assess both the surface forces and the mechanical response that were associated with the hydrogel. These properties were investigated as a function of temperature, in water and in Tris buffer, for different degrees of polymer cross-linking. For samples in water, the distance over which the surface forces were effective was found to remain constant as the temperature was increased from 26 to 42 °C, even though the mechanical response indicated that the samples had been heated past the lower critical solution temperature, or LCST. The bulk of the polymer becomes less soluble above the LCST, although this does not seem to affect the surface properties. This may be due to the segregation of the acrylic acid-rich polymer segments near the gel surface, which is in agreement with reports for related systems.