High-throughput screening of fuel cell electrocatalysts

The drawbacks of our earlier report of preparing fuel cell catalyst arrays by borohydride reduction of inkjet prepared arrays of metal salts are discussed along with the need for inclusion of state-of-the-art metrics in all array screening. An alternative method for screening of hydrogen/air cathode catalysts, direct methanol fuel cell (DMFC) anode catalysts, and catalyst loading studies is provided. State-of-the-art Johnson Matthey catalysts were used in control experiments to demonstrate the utility of the array fuel cell for high throughput screening of fuel cell catalysts in the 3-4 mg/cm² range. This report lays out hard learned rules for high throughput screening and demonstrates that the array fuel cell can be used for very precise screening of libraries of membrane electrode assembly (MEA) components without the pitfalls discussed in the introduction.     

Novel hexadentate imidazolium salts in the rhodium-catalyzed addition of arylboronic acids to aldehydes

Four novel hexadentate imidazolium salts were synthesized from hexakis(bromomethyl)benzene and 1-substituted imidazole. The arylation of aldehydes with arylboronic acids was effected conveniently and in high yields by a catalyst system generated in situ from these hexadentate imidazolium salts, [Rh(COD)Cl]₂ and a base.     

狭缝式高速摄影机胶片的计算机判读

根据狭缝摄影机胶片的成象原理,运用数字图象处理技术,对狭缝式高速摄影机胶片判读工作的计算机化进行研究.应用结果表明,该技术先进实用,极大地提高了判读的精度和效率,将是这种胶片判读技术的发展方向.     

A non-fused fiber coupler for side-pumping of double-clad fiber lasers

A non-fused fiber coupler is demonstrated for side-pumping of the double-clad fiber (DCF) lasers by adhesive techniques. The fiber coupler is fabricated by adhering an angularly polished single-clad fiber (SCF) to the inner cladding of the DCF. The pumping light is launched from the SCF by total inner reflection. Coupling coefficient as a function of coupling angle, bend distance, and backward scattering is investigated. The field distribution in DCF is also discussed.     

关于非球面制造技术的看法

列举了现代诸高科技领域对非球面光学系统的需求实例，如短波光学，空间光学，红外光学，微电子技术等。然后比较讨论了刀口阴影法与数字干涉检验的优缺点。在非球面修磨方法方面，首先肯定了计算机辅助加工是发展的方向，指出其主要优点在于“失误”造成的反复率大大降低。最后对非球面技术提出了总的看法，并对检测方法和修磨方法提出了几个研究课题。     

聚丙烯酰胺/醋酸铬与聚丙烯酰胺/酚醛胶态分散凝胶的纳米颗粒自组织分形结构

采用原子力显微镜 ,分别对无机交联体系聚丙烯酰胺 Cr3+ 和有机交联体系聚丙烯酰胺 酚醛胶态分散凝胶的微观结构进行了显微图像分析 .发现无论是在有机还是无机交联体系中 ,也无论聚丙烯酰胺和交联剂浓度如何变化 ,在微米尺度上最终形成的都是具有自相似性的树枝状分形图像 ,在更小尺度上则发现单个小树杈分形体都是由纳米级的颗粒紧密堆积而成 .在所研究的胶态分散凝胶体系中 ,树枝状分形结构的形成及其具体的形态取决于聚丙烯酰胺的浓度 ,而交联剂的有无及其多少只对树枝状凝胶分形的几何形态产生一定影响 .实验结果还表明纳米级 (≤ 10 0nm)的胶体颗粒构成的分形结构的凝胶其弹性模量G′比微米级的高出一个数量级 .且粒子尺度越小 ,则凝胶的力学稳定性越强     

铁电极上硫脲及衍生物的缓蚀作用研究

用极化曲线方法测定了硫酸溶液中硫脲及其衍生物的浓度变化对铁腐蚀电化学行为的影响，获得了腐蚀电位下缓蚀剂对阴极和阳极过程的作用系数，用ＥＨＭＯ方法对硫脲及其衍生物的结构参数进行了量化计算，分析表明，缓蚀剂对阴极和阳极过程作用系数的大小与这些参量有密切关系。     

Promoting effect of sol-gel method and pre-treatment on the activity of SnO2/Al2O3 catalyst for NO reduction by propene

SnO₂/Al₂O₃ catalyst prepared by sol-gel method showed higher activity than those prepared by impregnation method, and their activity was significantly improved by pre-treatment in the reaction gas. The increased activity is closely related to the agglomeration of SnO₂ species and the re-exposure of Al₂O₃, which was previously covered by dispersed SnO₂ species. This revised version was published online in June 2006 with corrections to the Cover Date.     

Cooperation of reducing species for NO reduction over Ag/Al2O3 under oxidizing conditions

Summary The cooperation effect of reducing species for selective reduction of NO over Ag/Al₂O₃ has been investigated in the presence of excess oxygen. When the combinations of propene or propane and ethanol or methanol were used as reducing agents, NO reduction took place over a wider temperature range, compared with a single hydrocarbon as reducing agent.     

含氟丙烯酸酯共聚乳液及其膜表面特性的研究

以十二烷基硫酸钠 (SDS)和OP 10混合乳化剂 ,制备了甲基丙烯酸全氟辛基乙酯 (FMA8) 甲基丙烯酸丁酯 (BMA) 甲基丙烯酸 (MAA)共聚乳液 .通过DSC、FT IR、1 H NMR对共聚物的结构、组成进行了表征研究 .采用JZHY 180界面张力仪研究了共聚乳液膜表面的性质 ,结果表明 ,随着共聚物中全氟单体含量的增加 ,共聚物膜的表面能显著降低 ,当全氟单体的含量达到 2 5wt %时 ,其表面能降低到 19 74mJ m2 .X ray光电子能谱(XPS)对共聚物表面原子组成的分析结果表明 ,共聚物表面氟的含量远高于其平均含量 ,证明了含氟基团的趋表现象 .经退火处理 ,共聚物膜表面的氟含量增加 ,表面自由能降低