增强型延迟反馈法控制低维混沌系统的解析研究

基于时间延迟反馈控制混沌系统的方法,提出一种增强型控制方案,并利用分析延迟系统产生Hopf分支条件的方法,给出这种方案控制低维连续自治混沌系统时,在达到控制目标的条件下,控制参数的一般解析关系.将这一方案和分析方法应用到两个混沌模型中,结果表明:采用修正的方案可以明显地改善控制混沌的效果和质量;解析分析的结果与实际数值计算的结果一致. 关键词： 延迟反馈 混沌控制 Hopf分支     

Polar oscillation and dispersion properties of quasi-confined optical phonon modes in a wurtzite GaN/AlxGa1−xN nanowire

Under the dielectric continuum model and Loudon’s uniaxial crystal model, the properties of the quasi-confined (QC) optical phonon dispersions and the electron-QC phonons coupling functions in a cylindrical wurtzite nanowire are deduced via the method of electrostatic potential expanding. Numerical computations on a GaN/Al_0.15Ga_0.85N wurtzite nanowire are performed. Results reveal that, for a definite axial wave number k_z and a certain azimuthal quantum number m, there are infinite branches of QC modes. The frequencies of these QC modes fall into two regions, i.e. a high frequency region and a low frequency region. The dispersion of the QC modes are quite apparant only when k_z and m are small. The lower-order QC modes in the higher frequency region play more important role in the electron-QC phonon interactions. Moreover, for the higher-order QC modes in the high frequency region, the electrostatic potentials “escaping” out of the well-layer material nearly could be ignored.     

低进汽压力下超音速两相流升压特性实验研究

本文采用实验方法研究了进汽压力为0.2 MPa以下时,由蒸汽喷嘴、混合腔及相应的阀门和管道组成超音速汽液两相流升压加热装置的运行特性。实验表明在进汽压力为0.1 MPa-0.2 MPa时,超音速汽液两相流升压加热装置都可稳定可靠地运行,且升压效果明显,可满足电力、供暖、轻工等许多行业蒸汽加热的要求。     

微纳米加工技术在纳米物理与器件研究中的应用

物质在纳米尺度下可能呈现出与体材料不同的物理特件，这正是纳米科技发展的基础之一。要想探索在纳米尺度下材料物埋性质的变化规律及可能的应用领域，离不开相应的技术手段，微纳米加工技术作为当今高技术发展的重要技术领域之一，是实现功能人工纳米结构与器件微纳米化的基础。本文根据几个不同的应用领域，介绍了微纳米加工技术在纳米物理与器件研究领域的应用。     

Upconversion luminescence of Tm^3＋/Yb^3＋ codoped oxyfluoride glasses

Novel oxyfluoride glasses are developed with the composition of 30SiO2-15Al2O3-28PbF2-22CdF2-0.1TmF3 - xYbF3 - （4.9 - x） AlF3（x=0, 0.5, 1.0, 1.5, 2.0） in tool fraction, Furthermore, the upconversion luminescence characteristics under a 970nm excitation are investigated. Intense blue, red and near infrared luminescences peaked at 453nm, 476nm, 647nm and 789nm, which correspond to the transitions of Tm^3＋： ^1D2 →^3F4, ^1G4 →^3H6, ^1G4 →^3F4, and ^3H4 →^3H6, respectively, are observed. Due to the sensitization of Yb^3＋ ions, all the upconversion luminescence intensities are enhanced considerably with Yb^3＋ concentration increasing. The upconversion mechanisms are discussed based on the energy matching rule and quadratic dependence on excitation power. The results indicate that the dominant mechanism is the excited state absorption for those upconversion emissions.     

壳聚糖作用下一步法合成具有高电活性的AgCl@聚苯胺核壳结构

在壳聚糖的作用下，采用简单的一步法合成了具有星状结构的氯化银/聚苯胺核壳型复合材料。当壳聚糖的浓度为1%时，所制备的氯化银/聚苯胺复合材料具有高度的分散性，壳层厚度为30～80 nm、核的直径在25～60 nm范围内。通过透射电镜、红外光谱和X-射线衍射对样品的形态和组成进行了表征。循环伏安实验结果表明这种复合材料在中性条件下具有很好的电化学活性。     

Cu(phen)2+2和Cu(bpy)2+2与6-巯基嘌呤、腺嘌呤相互作用的研究

在ｐＨ为７．０的磷酸盐缓冲溶液中，用荧光光谱、紫外光谱、电化学及紫外光谱电化学等方法研究了铜配合物与６－巯基嘌呤、腺嘌呤的相互作用．结果表明，Ｃｕ（ｐｈｅｎ）２＋２和Ｃｕ（ｂｐｙ）２＋２与６－巯基嘌呤、腺嘌呤发生了相互作用，但作用程度不同．根据荧光光谱实验数据计算出Ｃｕ（ｐｈｅｎ）２＋２和Ｃｕ（ｂｐｙ）２＋２与６－巯基嘌呤、腺嘌呤的配位比均为１∶１；它们与６－巯基嘌呤作用的配位常数分别为２．２３×１０４Ｌ／ｍｏｌ和６．１１×１０４Ｌ／ｍｏｌ；与腺嘌呤作用的配位常数分别为１．９５×１０４Ｌ／ｍｏｌ和５．１２×１０４Ｌ／ｍｏｌ．电化学实验也获得了相近的结果．这为解释Ｃｕ（ｐｈｅｎ）２＋２和Ｃｕ（ｂｐｙ）２＋２与ＤＮＡ的作用机理及作用部位提供了有益的信息     

Direct electrochemistry and electrocatalysis of hemoglobin in gelatine film modified glassy carbon electrode

Direct electrochemical and electrocatalytic behavior of hemoglobin (Hb) immobilized on glass carbon electrode (GCE) containing gelatine (Gel) films was investigated. The characteristics of Hb/Gel film modified GC electrode were performed by using SEM microscopy, UV-vis spectroscopy and electrochemical methods. The immobilized Hb showed a couple of quasi-reversible redox peak with a formal potential of −0.38 V (versus SCE) in 0.1 M pH 7.0 PBS. The formal potential changed linearly from pH 4.03 to 8.41 with a slope value of −52.0 mV pH⁻¹, which suggested that a proton transfer was accompanied with each electron transfer (ET) in the electrochemical reaction. The Hb/gelatine/GCE displayed a rapid amperometric response to the reduction of H₂O₂ and nitrite.     

Rasch模型在“化学键”概念教学评价中的应用研究

运用Rasch模型探查高二学生对"化学键"概念的认知情况，运用Conquest软件和Winsteps软件对测试结果进行分析。结果表明：基于Rasch模型编制的测试卷能客观有效地检测学生对"化学键"概念的理解，为一线教师的有效教学提供学情基础。     

K-Ce_(0.5)Zr_(0.5)O_2催化碳颗粒物燃烧性能

用等体积浸渍法制备了不同K负载量的xKNO3-Ce0.5Zr0.5O2系列催化剂,用程序升温氧化反应(TPO)考察催化剂对碳颗粒物(soot)燃烧的催化活性.并采用XRD、BET、FT-IR、XPS等技术对KNO3负载催化剂进行表征.结果表明KNO3负载量对催化剂的比表面、表面化学环境有显著的影响;KNO3能使催化剂对soot的催化燃烧活性有较大提高,且存在最佳负载量,当x=0.5时,催化剂的活性最好,碳颗粒物的起燃温度(T)i和峰顶温度(Tp)分别为290℃和360℃.在反应过程中,KNO3熔融状态的形成和K2CO3的生成,使催化活性明显提高.