Biosorption of Chromium(III) by Biomass of Seaweed Sargassum sp. in a Fixed-Bed Column

This work aimed at modeling chromium biosorption using the biomass of seaweed Sargassum sp. in a fixed-bed column. The mathematical model used was obtained from the mass balance of the component in the liquid phase and in the biosorbent material. The effects of both axial dispersion in the column and the resistance to mass transfer in the solid were considered for the solution of the partial differential equations of the model, using the Galerkin method on finite elements. To represent the equilibrium data of the batch system the Langmuir isotherm were used. The chromium ion adsorption capacity of the seaweed Sargassum sp., at a temperature of 30°C and pH 3.5, was 2.61 mmol/g. The model performance was evaluated from experimental data obtained at 30°C for flow rates of 2, 6 and 8 mL/min. The parameters of the model, mass transfer and axial dispersion coefficients, were adjusted from these experimental data. The model proved adequate to describe chromium biosorption dynamics in fixed-bed columns.     

On a Modified Subgradient Algorithm for Dual Problems via Sharp Augmented Lagrangian*

We study convergence properties of a modified subgradient algorithm, applied to the dual problem defined by the sharp augmented Lagrangian. The primal problem we consider is nonconvex and nondifferentiable, with equality constraints. We obtain primal and dual convergence results, as well as a condition for existence of a dual solution. Using a practical selection of the step-size parameters, we demonstrate the algorithm and its advantages on test problems, including an integer programming and an optimal control problem. *Partially Supported by 2003 UniSA ITEE Small Research Grant Ero2. Supported by CAPES, Brazil, Grant No. 0664-02/2, during her visit to the School of Mathematics and Statistics, UniSA.     

Robust Adaptive Identification of Fuzzy Systems with Uncertain Data

This study presents a method of adaptive identification of parameters describing Sugeno fuzzy inference system in presence of bounded disturbances while maintaining the readability and interpretability of the fuzzy model during and after identification. This method do not require any a priori knowledge of a bound on the disturbance and noise and of a bound on the unknown parameters values. The method can be used for the robust and adaptive identification of slowly time varying nonlinear systems using fuzzy inference systems. The suggested method was used to build a fuzzy expert system that approximates the functional relationship between physical fitness and some of the measurable physiological parameters by their real measurements and opinion (human-experiences) of a medical expert.     

The Synthesis of Levyne-Type Zeolite Studied by Thermal Analysis of Methylquinuclidine Aluminosilicate Gels

DSC, TG and quadrupole mass spectrometer data concerning methylquinuclidinium iodide (MeQ1), dried precursor gel, and crystalline levyne-type zeolite are discussed together with the thermal degradation of MeQ1 mixed with single inorganic components of the gel. It is shown that MeQ⁺ions play a role in the organization of the gel structure. This revised version was published online in July 2006 with corrections to the Cover Date.     

Copolymerization of ethylene and non-conjugated diene using homogenous catalyst

Ethylene and different amounts of 1,7-octadiene were copolymerized using the metallocene catalyst system ethylidene-bis(fluorenyl) zirconium dichloride and methylaluminoxane (MAO) at both 50 and 90 °C. The catalyst activity has slightly increased with the addition of low amounts of the diene in relation to the homopolymerization of ethylene. The obtained polymers were characterized according to their melting temperature (T_m) and crystallinity degree (x_c) by differential scanning calorimetry (DSC). Weight-average molecular weight (M_w) and polydispersity were determined by gel permeation chromatography (GPC). Diene contents in the copolymer were obtained through the FTIR spectroscopy. The results indicated that at polymerization temperature of 90 °C, crosslinking bonds in the obtained copolymers were low, differently from what was observed at 50 °C. The diene content in the copolymer achieved more than 3 mol% and the comonomer conversion was around 15%. Moreover, the obtained copolymers have M_w around 100,000 and large polydispersity.     

Synthesis of 2-(p-R-benzoylmethylene)-3-(p-R-phenyl)-1H-quinoxalines

The reaction of 1,2-diaminobenzenes with substituted 1,2-dibenzoyl-1,2-dibromoethanes constitutes a convenient synthetic route to the hitherto 2-(p-R-benzoylmethylene)-3-(p-R-phenyl)-1H-quinoxalines. Structures of all products were elucidated by ir, ¹H and ¹³C-nmr, mass spectra data. X-Ray crystallography data confirm assigned structures.     

Polysaccharide differences between planktonic and biofilm-associated EPS from Pseudomonas fluorescens B52

The polysaccharides associated with free (planktonic) and surface-attached (biofilm) cells from cultures of Pseudomonas fluorescens strain B52 were compared. Variations in the attached matrix due to surface material (glass or stainless steel) were also analyzed. Two digestion methods were used to optimize the recoveries of sugars, uronic acids and acidic substituents. The yield of analyzable material after digestion reached 90% for the material associated to the biofilms, though only 20–30% for that bound to planktonic cells. The polysaccharide(s) in the biofilm had glucuronic and guluronic acids as main components, besides rhamnose, glucose and glucosamine. The proportion of glucuronic to guluronic acid was higher in the polysaccharide(s) found in biofilms formed on stainless steel than in those on glass.     

Straightforward synthesis of sphinganines via a serine-derived Weinreb amide

Sphinganines can be synthesized in just three steps from easily prepared serine-derived Weinreb amide 4. Pre-deprotonation of the acidic (N-H and O-H) protons of 4 allows for its efficient conversion to amino ketones 5. Such ketones can be selectively reduced to either erythro- or threo-sphinganines. Partially protected sphinganines 11 are also readily accessible in five steps from 4. Thus, Weinreb amide 4 represents one of the most versatile templates described to date for sphinganine synthesis.     

Total synthesis of 1-(Z)-atractylodinol

The total synthesis of 1-(Z)-atractylodinol, a natural polyacetylenic alcohol with several biological activities, has been achieved using a newly developed telluride synthon and a novel use for the Negishi type coupling reaction employing vinyl tellurides.