Polysaccharide differences between planktonic and biofilm-associated EPS from Pseudomonas fluorescens B52

The polysaccharides associated with free (planktonic) and surface-attached (biofilm) cells from cultures of Pseudomonas fluorescens strain B52 were compared. Variations in the attached matrix due to surface material (glass or stainless steel) were also analyzed. Two digestion methods were used to optimize the recoveries of sugars, uronic acids and acidic substituents. The yield of analyzable material after digestion reached 90% for the material associated to the biofilms, though only 20–30% for that bound to planktonic cells. The polysaccharide(s) in the biofilm had glucuronic and guluronic acids as main components, besides rhamnose, glucose and glucosamine. The proportion of glucuronic to guluronic acid was higher in the polysaccharide(s) found in biofilms formed on stainless steel than in those on glass.     

Total synthesis of 1-(Z)-atractylodinol

The total synthesis of 1-(Z)-atractylodinol, a natural polyacetylenic alcohol with several biological activities, has been achieved using a newly developed telluride synthon and a novel use for the Negishi type coupling reaction employing vinyl tellurides.     

Standard enthalpy of solution and formation of cesium chromate. Derived thermodynamic properties of the aqueous chromate,bichromate, and dichromate ions,alkali metal and alkaline earth chromates,and lead chromate

Calorimetric measurements of the enthalpy of solution of cesium chromate gave ΔH_soln = (7622 ± 24) cal_th mol^?1 for a dilution of Cs₂CrO₄·21128H₂O. This result, along with the enthalpy of dilution gave the standard enthalpy of solution, ΔH_soln^o = (7512 ± 31) cal_th mol^?1, whence the standard enthalpy of formation, ΔH_f⁰(Cs₂CrO₄, c, 298.15 K), was calculated to be ?(341.78 ± 0.46) kcal_th mol^?1. Recomputed thermodynamic data for the formation of the other alkali metal chromates have been tabulated. From their solubilities and enthalpies of solution, the standard entropies, S⁰(298 K), of BaCrO₄ and PbCrO₄ were estimated to be (38.9 ± 0.9) and (43.7 ± 1.2) cal_th K^?1 mol^?1, respectively. There is evidence that ΔH_f⁰(SrCrO₄, c, 298.15 K) may be in error. Thermochemical, solubility, and equilibrium data, have been combined to update the thermodynamic properties of the aqueous chromate (CrO₄^2?), bichromate (HCrO₄^?), and dichromate (Cr₂O₇^2?) ions. The new values at 298.15 K are as follows:

     

4.

Characterization of Sol-gel bioencapsulates for ester hydrolysis and synthesis     

Cleide M. F. Soares  Heizir F. de Castro  Juliana E. Itako  Flavio F. De Moraes  Gisella M. Zanin 《Applied biochemistry and biotechnology》2005,123(1-3):845-859

Candida rugosa lipase was entrapped in silica sol-gel particles prepared by hydrolysis of methyltrimethoxysilane and assayed by p-nitrophenyl palmitate hydrolysis, as a function of pH and temperature, giving pH optima of 7.8 (free enzyme) and 5.0–8.0 (immobilized enzyme). The optimum temperature for the immobilized enzyme (50–55°C) was 19°C higher than for the free enzyme. Thermal, operational, and storage stability were determined with n-butanol and bytyric acid, giving at 45°C a half-life 2.7 times greater for the immobilized enzyme; storage time was 21 d at room temperature. For ester synthesis, the optimum temperature was 47°C, and high esterification conversions were obtained under repeated batch cycles (half-life of 138 h).     

5.

A new polyphenol modified electrode containing an anchored ruthenium complex and its use in electrocatalytic oxidation of organic substrates     

Juliana R. Steter  José O.S. PontólioM.I.C.F. Costa  J.R. Romero 《Polyhedron》2007

This work describes the preparation of a new modified electrode containing a ruthenium complex (cis-aquadimethylbipyridyltriphenylphosphineruthenium II), bonded to a stable polyphenol film. This modified electrode promotes the fast electrocatalytic oxidation of safrol (5-allyl-benzo[1,3]dioxole) and isosafrol (5-propenyl-benzo[1,3]dioxole), giving two interesting products benzo[1,3]dioxole-5-carbaldehyde (piperonal) and 3-benzo[1,3]dioxol-5-yl-propenal respectively, with good yields. The electrode preparation can be carried out at a potential range which does not interfere on the anchored electroactive ruthenium complex, but it allows for the phenol oxidation to occur and therefore polymerize forming the polyphenol film. The catalytic character of this modified electrode is showed by its high turnover numbers. The procedure to isolate the products is very simple.     

6.

Hydrolysis of new phthalimide-derived esters catalyzed by immobilized lipase     

Juliana Vaz Bevilaqua  Lidia M. Lima  Aline Gomes Cunha  Eliezer J. Barreiro  Tito L. M. Alves  Lucia Moreira Campos Paiva  Denise M.Guimarães Freire 《Applied biochemistry and biotechnology》2005,121(1-3):117-128

The last step of the production of four phthalimide-derived acids, designed to act as antiasthma drugs, was performed by enzymatic hydrolysis of the respective methyl or ethyl esters. The esters 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic methyl ester (PHT-MET), 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic ethyl ester, 4-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester, and 2-(1,3-dioxo-1, 3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester were hydrolyzed by immobilized lipase. The enzymatic reaction could be used only to produce the desired 4-substituted compounds. The best result that was found to hydrolysis of PHT-MET, and, therefore, that ester was selected for optimization experiments in a three-phase system. Reactions were performed with solid biocatalyst (Lipozyme® RM IM), organic solvent phase (ethyl acetate), and aqueous phase (saturated Na₂CO₃ solution). To optimize the reaction conditions, an experimental design optimization procedure was used. The variables studied were the amount of enzyme, the temperature, and the volume of the aqueous solution. Time course experiments were then performed for different initial enzyme concentrations (0.5, 0.9, and 1.4 U_H/mL of solvent). The optimized reaction conditions found were 20 mg of Lipozyme (0.9 U_H/mL_solvent) and 5.0 mL of Na₂CO_3(sat) at 40°C for 6 h.     

7.

Incomplete Swallowing and Retracted Tongue Maneuvers for Electromyographic Signal Normalization of the Extrinsic Muscles of the Larynx     

Patricia Maria Mendes Balata  Hilton J. Silva  Gerlane Karla O. Nascimento  Klyvia Juliana R. Moraes  Leandro A. Pernambuco  Maria Clara R. Freitas  Leilane M. Lima  Renata S. Braga  Síntia R. Souza  Silvia Regina A. Moraes 《Journal of voice》2012,26(6):813.e1-813.e7

     

8.

Existence of solutions for the 3D-micropolar fluid system with initial data in Besov–Morrey spaces     

Lucas C. F. Ferreira  Juliana C. Precioso 《Zeitschrift für Angewandte Mathematik und Physik (ZAMP)》2013,64(6):1699-1710

In this paper, we show a local-in-time existence result for the 3D micropolar fluid system in the framework of Besov–Morrey spaces. The initial data class is larger than the previous ones and contains strongly singular functions and measures.     

9.

Green solvent approach for printable large deformation thermoplastic elastomer based piezoresistive sensors and their suitability for biomedical applications          下载免费PDF全文

Bruna F. Gonçalves  Pedro Costa  Juliana Oliveira  Sylvie Ribeiro  Vitor Correia  Gabriela Botelho  Senentxu Lanceros‐Mendez 《Journal of Polymer Science.Polymer Physics》2016,54(20):2092-2103

Composites based on biocompatible thermoplastic elastomer styrene‐ethylene/butylene‐styrene (SEBS) as matrix and multi‐walled carbon nanotubes (MWCNT) as nanofillers show excellent mechanical and piezoresistive properties from low to large deformations. The MWCNT/SEBS composites have been prepared following a green solvent approach, to extend their range of applicability to biomedical applications. The obtained composites with 2, 4, and 5 wt % MWCNT content provide suitable piezoresistive response up to 80% deformation with a piezoresistive sensibility near 2.7, depending on the applied strain and MWCNT content. Composite sensors were also developed by spray and screen printing and integrated with an electronic data acquisition system with RF communication. The possibility to accurately control the composites properties and performance by varying MWCNT content, viscosity, and mechanical properties of the polymer matrix, shows the large potential of the system for the development of large deformation printable piezoresistive sensors. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2092–2103     

10.

Assessment of pharmacokinetic interaction between piracetam and l‐carnitine in healthy subjects          下载免费PDF全文

Gustavo D. Mendes  Gabriela Traldi Zaffalon  Antonio Sérgio Silveira  Juliana Cama Ramacciato  Rogério Heládio Lopes Motta  Thiago Gagliano‐Jucá  Anibal Gil Lopes  José Cássio de Almeida Magalhães  Gilberto De Nucci 《Biomedical chromatography : BMC》2016,30(4):536-542

A rapid, sensitive and specific method for quantifying piracetam in human plasma using Piracetam d‐8 as the internal standard (IS) is described. The analyte and the IS were extracted from plasma by one‐step precipitation of protein using an acetonitrile (100%). The extracts were analyzed by high‐performance liquid chromatography coupled with electrospray tandem mass spectrometry (HPLC‐MS/MS). The method had a chromatographic run time of 3.8 min and a linear calibration curve over the range 0.5–50 µg/mL (r > 0.99). This LC‐MS‐MS procedure was used to assess the bioavailability of two piracetam formulations: piracetam + l‐carnitine (Piracar®; 270/330 mg tablet) and piracetam (Nootropil®; 800 mg tablet) in healthy volunteers of both sexes. The geometric means with corresponding 90% confidence interval (CI) for test/reference percentage ratios were 88.49% (90% CI = 81.19 – 96.46) for peak concentration/dose and 102.55% (90% CI = 100.62 – 104.51) for AUC_inf/dose. The limit of quantitation of 0.5 µg/mL is well suited for pharmacokinetic studies in healthy volunteers. It was concluded that piracetam (Piracar®; 270/330 mg tablet) has a bioavailability equivalent to the piracetam (Nootropil®; 800 mg tablet) formulation with regard to both the rate and the extent of absorption. Copyright © 2015 John Wiley & Sons, Ltd.     

1 [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] 下一页 » 末  页»

	$\text{S}{}^0\text{/}\text{cal}{}_{\mathrm{th}}\text{K}{}^{\mathrm{?1}}\text{mol}{}^{\mathrm{?1}}$	$\text{ΔH}{}_{\mathrm{f}}{}^0\text{/kcal}{}_{\mathrm{th}}\text{mol}{}^{\mathrm{?1}}$	$\text{ΔG}{}_{\mathrm{f}}{}^0\text{/kcal}{}_{\mathrm{th}}\text{mol}{}^{\mathrm{?1}}$
CrO42?(aq)	(13.8 ± 0.5)	?(210.93 ± 0.45)	?(174.8 ± 0.5)
HCrO4?(aq)	(46.6 ± 1.8)	?(210.0 ± 0.7)	?(183.7 ± 0.5)
Cr2O72?(aq)	(67.4 ± 3.9)	?(356.5 ± 1.5)	?(312.8 ± 1.0)

Characterization of Sol-gel bioencapsulates for ester hydrolysis and synthesis

Candida rugosa lipase was entrapped in silica sol-gel particles prepared by hydrolysis of methyltrimethoxysilane and assayed by p-nitrophenyl palmitate hydrolysis, as a function of pH and temperature, giving pH optima of 7.8 (free enzyme) and 5.0–8.0 (immobilized enzyme). The optimum temperature for the immobilized enzyme (50–55°C) was 19°C higher than for the free enzyme. Thermal, operational, and storage stability were determined with n-butanol and bytyric acid, giving at 45°C a half-life 2.7 times greater for the immobilized enzyme; storage time was 21 d at room temperature. For ester synthesis, the optimum temperature was 47°C, and high esterification conversions were obtained under repeated batch cycles (half-life of 138 h).     

A new polyphenol modified electrode containing an anchored ruthenium complex and its use in electrocatalytic oxidation of organic substrates

This work describes the preparation of a new modified electrode containing a ruthenium complex (cis-aquadimethylbipyridyltriphenylphosphineruthenium II), bonded to a stable polyphenol film. This modified electrode promotes the fast electrocatalytic oxidation of safrol (5-allyl-benzo[1,3]dioxole) and isosafrol (5-propenyl-benzo[1,3]dioxole), giving two interesting products benzo[1,3]dioxole-5-carbaldehyde (piperonal) and 3-benzo[1,3]dioxol-5-yl-propenal respectively, with good yields. The electrode preparation can be carried out at a potential range which does not interfere on the anchored electroactive ruthenium complex, but it allows for the phenol oxidation to occur and therefore polymerize forming the polyphenol film. The catalytic character of this modified electrode is showed by its high turnover numbers. The procedure to isolate the products is very simple.     

Hydrolysis of new phthalimide-derived esters catalyzed by immobilized lipase

The last step of the production of four phthalimide-derived acids, designed to act as antiasthma drugs, was performed by enzymatic hydrolysis of the respective methyl or ethyl esters. The esters 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic methyl ester (PHT-MET), 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic ethyl ester, 4-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester, and 2-(1,3-dioxo-1, 3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester were hydrolyzed by immobilized lipase. The enzymatic reaction could be used only to produce the desired 4-substituted compounds. The best result that was found to hydrolysis of PHT-MET, and, therefore, that ester was selected for optimization experiments in a three-phase system. Reactions were performed with solid biocatalyst (Lipozyme® RM IM), organic solvent phase (ethyl acetate), and aqueous phase (saturated Na₂CO₃ solution). To optimize the reaction conditions, an experimental design optimization procedure was used. The variables studied were the amount of enzyme, the temperature, and the volume of the aqueous solution. Time course experiments were then performed for different initial enzyme concentrations (0.5, 0.9, and 1.4 U_H/mL of solvent). The optimized reaction conditions found were 20 mg of Lipozyme (0.9 U_H/mL_solvent) and 5.0 mL of Na₂CO_3(sat) at 40°C for 6 h.     

Existence of solutions for the 3D-micropolar fluid system with initial data in Besov–Morrey spaces

In this paper, we show a local-in-time existence result for the 3D micropolar fluid system in the framework of Besov–Morrey spaces. The initial data class is larger than the previous ones and contains strongly singular functions and measures.     

Green solvent approach for printable large deformation thermoplastic elastomer based piezoresistive sensors and their suitability for biomedical applications

Composites based on biocompatible thermoplastic elastomer styrene‐ethylene/butylene‐styrene (SEBS) as matrix and multi‐walled carbon nanotubes (MWCNT) as nanofillers show excellent mechanical and piezoresistive properties from low to large deformations. The MWCNT/SEBS composites have been prepared following a green solvent approach, to extend their range of applicability to biomedical applications. The obtained composites with 2, 4, and 5 wt % MWCNT content provide suitable piezoresistive response up to 80% deformation with a piezoresistive sensibility near 2.7, depending on the applied strain and MWCNT content. Composite sensors were also developed by spray and screen printing and integrated with an electronic data acquisition system with RF communication. The possibility to accurately control the composites properties and performance by varying MWCNT content, viscosity, and mechanical properties of the polymer matrix, shows the large potential of the system for the development of large deformation printable piezoresistive sensors. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2092–2103     

Assessment of pharmacokinetic interaction between piracetam and l‐carnitine in healthy subjects

A rapid, sensitive and specific method for quantifying piracetam in human plasma using Piracetam d‐8 as the internal standard (IS) is described. The analyte and the IS were extracted from plasma by one‐step precipitation of protein using an acetonitrile (100%). The extracts were analyzed by high‐performance liquid chromatography coupled with electrospray tandem mass spectrometry (HPLC‐MS/MS). The method had a chromatographic run time of 3.8 min and a linear calibration curve over the range 0.5–50 µg/mL (r > 0.99). This LC‐MS‐MS procedure was used to assess the bioavailability of two piracetam formulations: piracetam + l‐carnitine (Piracar®; 270/330 mg tablet) and piracetam (Nootropil®; 800 mg tablet) in healthy volunteers of both sexes. The geometric means with corresponding 90% confidence interval (CI) for test/reference percentage ratios were 88.49% (90% CI = 81.19 – 96.46) for peak concentration/dose and 102.55% (90% CI = 100.62 – 104.51) for AUC_inf/dose. The limit of quantitation of 0.5 µg/mL is well suited for pharmacokinetic studies in healthy volunteers. It was concluded that piracetam (Piracar®; 270/330 mg tablet) has a bioavailability equivalent to the piracetam (Nootropil®; 800 mg tablet) formulation with regard to both the rate and the extent of absorption. Copyright © 2015 John Wiley & Sons, Ltd.