Re-Evaluation of the Activity Coefficients of Aqueous Hydrochloric Acid Solutions up to a Molality of 2.0 Using Two-Parameter Hückel and Pitzer Equations. Part I. Results at 25°C

Simple two-parameter Hückel and Pitzer equations were used for the calculation of the activity coefficients of aqueous hydrochloric acid at 25°C up to a molality of 2.0 mol-kg^–1. The data obtained by Harned and Ehlers^(12,13) from galvanic cells without liquid junction were used in the analysis and the parameters obtained were compared to those obtained from all reliable data presented in the literature for HCl at this temperature. A good agreement between the parameters was always observed. The activity coefficients obtained by the new equations were compared to those suggested by Robinson and Stokes,⁽⁸⁾ Hamer and Wu,⁽¹⁾ and Pitzer and Mayorga,⁽⁹⁾ and good agreement was also found. The data from the most important literature data sets for HCl were also predicted using the new activity coefficient equations, and the magnitude of the resulting errors was close to the precision of the measurements, the errors forming an almost random pattern for all data sets.     

Electron ionization mass spectra of some norbornane/ene-fused 2-N-phenyliminoperhydro-1,3-oxazines

The 70 eV electron ionization (EI) mass spectra were recorded for eight norbornane/ene-fused 2-N-phenyl-iminoperhydro-1,3-oxazines, and the fragmentation patterns were studied by metastable ion analysis and exact mass measurement. Whereas the stereoisomeric unsaturated compounds could not be distinguished on the basis of their EI mass spectra, the stereoisomeric saturated compounds gave rise to clearly different spectra. The ionized unsaturated compounds decomposed mainly by two consecutive retro-Diels-Alder (RDA) reactions. A methyl substituent on the ring nitrogen strongly influenced the charge distribution on the RDA fragments. The ionized saturated compounds fragmented through several pathways. Loss of cyclopentadiene from the molecular ion was the energetically favoured fragmentation reaction for the saturated di-endo-fused compounds but was unimportant for the di-exo-fused compounds.     

Equations for calculation of the pH of buffer solutions containing sodium or potassium dihydrogen phosphate, sodium hydrogen phosphate, and sodium chloride at 25°C

Published thermodynamic data measured in aqueous mixtures of sodium or potassium dihydrogen phosphate with hydrogen phosphate and chloride at 25°C were used to test recently developed methods for calculation of the pH of phosphate buffer solutions. Equations for ionic activity coefficients are used in these methods. It is shown that all data used in the tests up to an ionic strength of about 0.5 mol-kg^-1 can be accurately predicted by the two methods recommended. In one of these methods, equations of the Hückel type are used for ionic activity coefficients and in the other equations of the Pitzer type. Several sets of phosphate buffer solutions are recommended,e.g., for calibrations of glass electrode cells. In the recommended sets, the pH of the buffer solutions can be calculated either by the Hückel or Pitzer method, and the pH predictions of these methods agree in most cases within 0.005 at least up to ionic strengths of about 0.2 mol-kg^-1. The pH values of the two primary pH standards endorsed by IUPAC based on aqueous mixtures of KH₂PO₄ and Na₂HPO₄,i.e., pH values of 6.865 and 7.413, can also be accurately predicted by the equations recommended in this study.     

Calculation of binary magnetic properties and potential energy curve in xenon dimer: second virial coefficient of (129)Xe nuclear shielding

Quantum chemical calculations of the nuclear shielding tensor, the nuclear quadrupole coupling tensor, and the spin-rotation tensor are reported for the Xe dimer using ab initio quantum chemical methods. The binary chemical shift delta, the anisotropy of the shielding tensor Delta sigma, the nuclear quadrupole coupling tensor component along the internuclear axis chi( parallel ), and the spin-rotation constant C( perpendicular ) are presented as a function of internuclear distance. The basis set superposition error is approximately corrected for by using the counterpoise correction (CP) method. Electron correlation effects are systematically studied via the Hartree-Fock, complete active space self-consistent field, second-order M?ller-Plesset many-body perturbation, and coupled-cluster singles and doubles (CCSD) theories, the last one without and with noniterative triples, at the nonrelativistic all-electron level. We also report a high-quality theoretical interatomic potential for the Xe dimer, gained using the relativistic effective potential/core polarization potential scheme. These calculations used valence basis set of cc-pVQZ quality supplemented with a set of midbond functions. The second virial coefficient of Xe nuclear shielding, which is probably the experimentally best-characterized intermolecular interaction effect in nuclear magnetic resonance spectroscopy, is computed as a function of temperature, and compared to experiment and earlier theoretical results. The best results for the second virial coefficient, obtained using the CCSD(CP) binary chemical shift curve and either our best theoretical potential or the empirical potentials from the literature, are in good agreement with experiment. Zero-point vibrational corrections of delta, Delta sigma, chi (parallel), and C (perpendicular) in the nu=0, J=0 rovibrational ground state of the xenon dimer are also reported.     

Re-Evaluation of the Activity Coefficients of Aqueous Hydrochloric Acid Solutions up to a Molality of 2.0 Using Two-Parameter Hückel and Pitzer Equations. Part II. Results from 0 to 95°C

Simple two-parameter Hückel and Pitzer equations were used for the calculation of the activity coefficients of aqueous hydrochloric acid at temperatures 0–60°C up to a molality of 2.0 mol-kg^–1. The data obtained by Harned and Ehlers^(2,3) on galvanic cells without a liquid junction were used in the parameter estimations of these equations. These data consist of sets of measurements at the temperature intervals of 5°C. It was observed that all estimated parameters follow very simple equations with respect to temperature. They are either constant or depend linearly on the temperature. The values for the activity coefficient parameters calculated by these simple equations are recommended here. The recommended parameter values were tested by predicting the data of Gupta, Hills, and Ives,⁽⁵⁾ consisting of cell measurements from 5 to 45°C and molalities up to 1.0 mol-kg^–1, and the data of Bates and Bower,⁽⁴⁾ which extend to 95°C but measurements were only made on molalities less than about 0.1 mol-kg^–1. The activity coefficients obtained by the new equations were also compared to those calculated by the Pitzer equations with the parameter values determined by Saluja, Pitzer, and Phutela⁽⁶⁾ from calorimetric data. The agreement observed was excellent up to a molality of 1.5 mol-kg^–1 at temperatures from 0 to 60°C.     

Polymerization of methyl methacrylate in the presence of iron(II) complex with tetradentate nitrogen ligands under conditions of atom transfer radical polymerization

Four tetradentate nitrogen ligands, viz. dichloro{[N,N^′-diphenyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (1), {[N,N^′-dioctyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (2), {[N,N^′-dibenzyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (3), and (1R,2R)-(−)-N,N^′-di(quinoline-2-methyl) di-iminocyclohexane (4), were investigated as novel complexing ligands in iron-mediated atom transfer radical polymerization (ATRP) of methyl methacrylate where ethyl-2-bromoisobutyrate was the initiator in o-xylene at 90 °C. With ligands 1 and 2 the experimental molecular weights increased gradually with monomer conversion. High to moderate conversions (87%, 43%) were obtained in relatively short times (90 min for 1 and 30 min for 2), which indicates an efficient catalyst system, but after these times a dramatic increase in viscosity of the polymerization medium led to loss of control. It is noteworthy that polymerization proceeded in a controlled manner with ligand 1, which has two rather bulky substituents on the N-atom. Such bulky ligands did not work for a copper-based system, where they led to excessive terminations or other side reactions. When the bulkiness of the substituents was significantly increased, as in ligand 3, a decrease in polymerization rate and loss of control occurred. Ligand 4 was less efficient than the other ligands, probably because the ethylene bridge was replaced by cyclohexane bridge.     

The vane method and kinetic modeling: shear rheology of nanofibrillated cellulose suspensions

We conduct rheological characterization of nanofibrillated cellulose (NFC) suspensions, a highly non-Newtonian complex fluid, at several concentrations. Special care is taken to cope with the prevalent problems of time scale issues, wall depletion and confinement effects. We do this by combining the wide-gap vane geometry, extremely long measurement times, and modeling. We take into account the wide-gap related stress heterogeneity by extending upon mainstream methods and apply a gap correction. Furthermore, we rationalize the experimental data through a simple viscous structural model. With these tools we find that, owing to the small size of the particles subjected to Brownian motion, the NFC suspensions exhibit a critical shear rate, where the flow curve experiences a turning point. This makes the steady state of these suspensions at low shear rates non-unique. To optimize various mixing and pumping applications, such history dependent tendency of NFC suspensions to shear band needs to be taken into account.     

On applicability of PCA,voxel-wise variance normalization and dimensionality assumptions for sliding temporal window sICA in resting-state fMRI

Subject-level resting-state fMRI (RS-fMRI) spatial independent component analysis (sICA) may provide new ways to analyze the data when performed in the sliding time window. However, whether principal component analysis (PCA) and voxel-wise variance normalization (VN) are applicable pre-processing procedures in the sliding-window context, as they are for regular sICA, has not been addressed so far. Also model order selection requires further studies concerning sliding-window sICA. In this paper we have addressed these concerns. First, we compared PCA-retained subspaces concerning overlapping parts of consecutive temporal windows to answer whether in-window PCA and VN can confound comparisons between sICA analyses in consecutive windows. Second, we compared the PCA subspaces between windowed and full data to assess expected comparability between windowed and full-data sICA results. Third, temporal evolution of dimensionality estimates in RS-fMRI data sets was monitored to identify potential challenges in model order selection in a sliding-window sICA context. Our results illustrate that in-window VN can be safely used, in-window PCA is applicable with most window widths and that comparisons between windowed and full data should not be performed from a subspace similarity point of view. In addition, our studies on dimensionality estimates demonstrated that there are sustained, periodic and very case-specific changes in signal-to-noise ratio within RS-fMRI data sets. Consequently, dimensionality estimation is needed for well-founded model order determination in the sliding-window case. The observed periodic changes correspond to a frequency band of ≤ 0.1 Hz, which is commonly associated with brain activity in RS-fMRI and become on average most pronounced at window widths of 80 and 60 time points (144 and 108 s, respectively). Wider windows provided only slightly better comparability between consecutive windows, and 60 time point or shorter windows also provided the best comparability with full-data results. Further studies are needed to determine the cause for dimensionality variations.     

Nanofibrillated cellulose/carboxymethyl cellulose composite with improved wet strength

In this paper, nanofibrillated cellulose/carboxymethyl cellulose (CMC) composite films were prepared using tape casting. The obtained transparent films showed shear induced partial alignment of fibrils along the casting direction, resulting in birefringence in cross polarized light. The carboxyl groups of CMC could be further utilized to create ionic crosslinking by treatment with glycidyl trimethyl ammonium chloride (GTMA). The GTMA treated composite films had improved mechanical properties both in wet and dry state. The chemical composition and morphologies of composites were analyzed with X-ray photoelectron spectroscopy, elemental analysis, scanning electron microscopy and wide-angle X-ray scattering.