A fast method to measure the thickness of removed layer from etching of SSNTD based on EDXRF

Solid state nuclear track detectors are commonly used for measurements of concentrations of radon gas and/or radon progeny. All these measurements depend critically on the thickness of the removed layer during etching. However, the thickness of removed layer calculated using the etching period does not necessarily provide a sufficiently accurate measure of the thickness. For example, the bulk etch rate depends on the strength of stirring during etching for the LR 115 detector. We propose here to measure the thickness of the removed layer by using energy-dispersive X-ray fluorescence spectrometry. In the present work, a reference silver nitrate pellet is placed beneath the LR 115 detector, and the fluorescence X-ray intensity for silver is then measured. We have found a linear relationship between the X-ray intensity and the thickness of the removed layer for LR 115 detector. This provides a fast method to measure the thickness of removed layer from etching of LR 115 detector. However, this method was found to be inapplicable for the CR-39 detector. Therefore, alternative methods have yet to be explored for the CR-39 detector.     

Differentiation between tracks and damages in SSNTD under the atomic force microscope

We have observed three-dimensional sponge-like structures as well as strips of connecting pits on the surface of the LR 115 detector after etching, which can be confused with the small tracks formed after short etching time. We have employed an atomic force microscope (AFM) to study these “damages” as well as genuine alpha tracks for short etching time. It was found that while the track and damage openings could be similar in size and shape, the depths for the damages were consistently smaller. Therefore, the depth of the pits will serve as a clear criterion to differentiate between tracks and other damages. The ability to discriminate between genuine tracks from other damages is most important for etching for short time intervals.     

Improved estimation of a covariance matrix in an elliptically contoured matrix distribution

In this paper, the problem of estimating the covariance matrix of the elliptically contoured distribution (ECD) is considered. A new class of estimators which shrink the eigenvalues towards their arithmetic mean is proposed. It is shown that this new estimator dominates the unbiased estimator under the squared error loss function. Two special classes of ECD, namely, the multivariate-elliptical t distribution and the ε-contaminated normal distribution are considered. A simulation study is carried out and indicates that this new shrinkage estimator provides a substantial improvement in risk under most situations.     

The determination of lead and nickel by atomic-absorption spectrometry with a flameless wire loop atomizer

In an extension of studies of flameless atomizers for atomic-absorption spectrometry, an electrically heated tungsten-rhenium alloy wire loop was examined. Reduction of metallic salts to ground-state metal atoms was accomplished with the high temperature produced by the loop. Lead and nickel were investigated. Experimental parameters such as wavelength, slit width, atomization temperature and sheathing gas flow rate were optimized. Absolute detection limits of 6.6·10^?10 and 1.2·10^?10, and absolute sensitivities of 7·10^?10 and 8·10^?11 g of lead, were established for unenclosed and enclosed cells, respectively. The interferences of twenty cations and sixteen anions were studied; foreign cations generally enhanced the lead absorption by retarding its vaporization, allowing the slow detection system to respond more efficiently. Nickel was investigated as a representative less volatile metal; an absolute detection limit of 1.6·10^?9 and an absolute sensitivity of 9·10^?10 g of nickel were established.     

Cell docking inside microwells within reversibly sealed microfluidic channels for fabricating multiphenotype cell arrays

We present a soft lithographic method to fabricate multiphenotype cell arrays by capturing cells within an array of reversibly sealed microfluidic channels. The technique uses reversible sealing of elastomeric polydimethylsiloxane (PDMS) molds on surfaces to sequentially deliver various fluids or cells onto specific locations on a substrate. Microwells on the substrate were used to capture and immobilize cells within low shear stress regions inside channels. By using an array of channels it was possible to deposit multiple cell types, such as hepatocytes, fibroblasts, and embryonic stem cells, on the substrates. Upon formation of the cell arrays on the substrate, the PDMS mold could be removed, generating a multiphenotype array of cells. In addition, the orthogonal alignment and subsequent attachment of a secondary array of channels on the patterned substrates could be used to deliver fluids to the patterned cells. The ability to position many cell types on particular regions within a two dimensional substrate could potentially lead to improved high-throughput methods applicable to drug screening and tissue engineering.     

Aerobic oxidative cyclization under Pd(II) catalysis: a regioselective approach to heterocycles

[chemical reaction: see text]. An efficient Yb(OTf)3-promoted palladium-catalyzed oxidative cyclization of gamma-heteroalkenyl beta-keto amides has been developed. Under simple aerobic condition, a variety of six-, seven-, and eight-membered-ring N- and O-heterocycles were obtained regioselectively in excellent yield.     

A mesoporous Pt/TiO2 nanoarchitecture with catalytic and photocatalytic functions

A novel metal/semiconductor nanocomposite with catalytic and photocatalytic functions has been prepared. The new material consists of highly dispersed platinum (Pt) nanoparticles embedded in a cubic mesoporous nanocrystalline anatase (meso-nc-TiO2) thin film. The porous thin film possesses a narrow pore-size distribution and a large surface area. The diameter of the Pt cluster can be controlled to below 5 nm, and the high dispersion of these clusters gives rise to catalytic activity for the oxidation of carbon monoxide, an important reaction for automobile exhaust treatment. This novel ordered mesoporous Pt/TiO2 nanoarchitecture is also a promising photochemical material, as demonstrated by the photo-driven killing of Micrococcus lylae cells on the film.