A preemptive repeat priority queue with resampling: Performance analysis

In this paper, we analyze a discrete-time preemptive repeat priority queue with resampling. High-priority packets have preemptive repeat priority, and interrupted low-priority packets are subjected to independent retransmission attempts. Both classes contain packets with generally distributed transmission times. We show that the use of generating functions is beneficial for analyzing the system contents and packet delay of both classes. The influence of the priority scheduling on the performance measures is illustrated by some numerical examples. This work has been supported by the Interuniversity Attraction Poles Programme–Belgian Science Policy.     

Strategies for multi-site GLP studies

 A GLP study can be performed at more than one site. This is called a multi-site study. Although, the study is performed at different sites, it is still one study and must completely comply with the GLP principles. The fact that different activities are conducted at different sites implies that the planning, the organization and the communication are crucial for the success of the study. This means that all the staff involved should know their responsibilities and should have the knowledge and skills to realize all the phases of the study according to the GLP principles. To achieve a well managed multi-site study, several strategies for setting up such a study can be followed. This paper focuses on the responsibilities, communication, and collaboration of the personnel, which are involved in a multi-site study. Several case studies are highlighted, and we concluded that the basic communication triangle in a single-site GLP study between test facility management, study director, and the quality assurance unit should be extended to the communication among test facility and test site management, study director, principle investigator(s), and the quality assurance units at the test sites. Introduction Received: 14 August 2002 Accepted: 26 November 2002     

Importance of REP values when comparing the CALUX bioassay results with chemoanalyses results Example with spiked vegetable oils

Differences between chemical activated luciferase gene expression (CALUX) bioassay and chemoanalyses results are observed.This paper shows that calculations of the TEQ values using REP values instead of WHO TEF values give different results. The REP values do affect the results obtained by the CALUX technique. These differences are more marked for the dioxin like PCB compounds (CALUX TEQ values are lower than WHO TEQ values) than for the dioxin compounds (CALUX TEQ values are higher than WHO TEQ values).The CALUX results were compared with the concentrations of the congeners’ spiked into the oil.     

Synthesis and spectroscopic characterization of a new family of Ni(4) spin clusters

A new family of tetranuclear Ni complexes [Ni(4)(ROH)(4)L(4)] (H(2)L = salicylidene-2-ethanolamine; R = Me (1) or Et (2)) has been synthesized and studied. Complexes 1 and 2 possess a [Ni(4)O(4)] core comprising a distorted cubane arrangement. Magnetic susceptibility and inelastic neutron scattering studies indicate a combination of ferromagnetic and antiferromagnetic pairwise exchange interactions between the four Ni(II) centers, resulting in an S = 4 spin ground state. Magnetization measurements reveal an easy-axis-type magnetic anisotropy with D approximately -0.93 cm(-)(1) for both complexes. Despite the large magnetic anisotropy, no slow relaxation of the magnetization is observed down to 40 mK. To determine the origin of the low-temperature magnetic behavior, the magnetic anisotropy of complex 1 was probed in detail using inelastic neutron scattering and frequency domain magnetic resonance spectroscopy. The spectroscopic studies confirm the easy-axis-type anisotropy and indicate strong transverse interactions. These lead to rapid quantum tunneling of the magnetization, explaining the unexpected absence of slow magnetization relaxation for complex 1.     

Improvement of cyclosporin A determination in whole blood by reversed-phase high-performance liquid chromatography

A chromatographic method was developed for the determination of cyclosporin A in human whole blood using reversed-phase HPLC at room temperature. Most previous reports carried out this liquid chromatographic separation at temperatures above 70 degrees C. The present procedure greatly improves the detection limit by controlling peak broadening effects, as well as the lifetime of the column at room temperature. Under optimal conditions and using ketoconazole as an internal standard, the calibration graph was linear in the range of 16-1000 microg/L with a relative standard deviation of 3.72% at 150 microg/L and 2.45% at 300 microg/L (n = 11) of cyclosporin A. The detection limit was of 5.0 microg/L cyclosporin A. By this procedure, cyclosporin A pharmacokinetic parameters in healthy Chinese subjects were studied. The developed method could be applied to the quantification of cyclosporin A in human blood samples and allows the study of its pharmacokinetics in routine laboratories.     

Thermodynamic issues associated with combined cyclic voltammetry and wafer curvature measurements in electrolytes

A thermodynamic framework has been provided for the interpretation of combined cyclic voltammetry and surface stress measurements, the latter being obtained from wafer curvature or beam deflection measurements of a solid electrode as a function of applied potential (so-called voltstressograms). Firstly, the derivation of electrocapillarity equations for solid electrodes has been critically reviewed by starting from the Gibbs adsorption equation appropriate for solid–electrolyte interfaces. This allowed us to demonstrate the critical importance of elastic surface strain in the thermodynamic boundary conditions of the partial derivatives intervening in the interpretation of voltstressograms. From these considerations, it was shown for the first time that the electrocapillarity equations for solid electrodes are not appropriate for describing the variation of surface stress with potential obtained from wafer curvature measurements, because such measurements are intrinsically incompatible with the constant strain condition implied in the electrocapillarity equations. An alternative explanation is provided for the experimentally observed proportionality between the current density, measured in cyclic voltammograms, and the first derivative of surface stress with respect to potential, obtained from voltstressograms.     

CYCLIC VOLTAMMETRY MEASUREMENTS OF THE PHOTOELECTROGENIC REACTIONS OF THYLAKOID MEMBRANES

Abstract— In this paper, the technique of cyclic voltammetry has been used in a photoelectrochemical cell in order to follow the redox species formed in solution by the photo-induced electron transfer between the thylakoids and various acceptors and donors. The photoelectrochemical behavior of artificial electron acceptors (such as 2,5-dichlorobenzoquinone and methylviologen) and donors (such as sym -diphenylcarbazide and durohydroquinone) specific for either Photosystem I or Photosystem II has been investigated. The influence of inhibiting agents (such as 3-(3,4-dichlorophenyl)-1,1-dimethylurea and Tris) on the cell photoresponse has also been characterized, together with the capability of donors to restore the photocurrent. Evidence for H₂O₂ formation by way of a Mehler-type reaction has been provided and an electrochemical model of its coupled photochemical and electrochemical reactions in solution is reported.     

En route to coordination chemistry under confined conditions in a porous capsule: Pr3+ with different coordination shells

The highly charged nanocontainer capsule of the type [pentagon]12[linker]30 identical with [(Mo)Mo5O21(H2O)6]12[Mo2O4(SO4)]30 with 20 nanosized pores and channels allows the entrance of cations like Pr3+: the latter are positioned at two different sites and have two different coordination shells, corresponding to a coordination chemistry under confined conditions; a fascinating aspect is that capsule encapsulated water shells fixed by hydrogen bonds act formally as polydentate ligands.     

Interpretation of CALUX results in view of the EU maximal TEQ level in milk

Analyses of dioxins in food have become increasingly important since the European Commission has enforced maximal toxic equivalent concentration (TEQ) levels in various food and feed products. Screening methodologies are usually used to exempt those samples that are below the maximum permitted limit and that can, therefore, be released to the market. In addition, one needs to select those samples that require confirmation of their dioxin TEQ level. When bioassays are used as screening tools, the interpretation of the obtained results should consider the higher variability and uncertainty associated with them. This paper explores the use of CALUX data as quantitative screening results. The validation of the method for the polychlorinated dibenzo-p-dioxins (PCDD)/F TEQ determination in milk samples is described with emphasis on the decision limit (CC) and the precision of the method. The decision limit amounts to 4.53 pg TEQ/g fat. Repeatability and within-lab reproducibility coefficients of variation are below 30%. The newly introduced parameter CC^* of 1.47 pg TEQ/g fat delimits with CC a range of suspicious results. These data are not significantly different from the maximum limit of 3 pg TEQ/g fat and should be confirmed by a confirmatory analytical method such as HRGC–HRMS.