基于自适应预测滤波理论的模数转换器设计方法

基于自适应差分量化理论，提出了在不增加转换位数的情况下提高模数转换器(ADC)动态范围的一种设计方法。该方法通过量化输入与预测的差值来获得预测增益，从而扩大ADC的动态范围；通过差分量化值与预测值相加得到输出信号，并将该分别采用LMS和RLS算法进行处理．得到输入信号的预测值．计算机模拟结果证实，上述两种算法均能使模数转换器的动态范围提高约25dB．比较而言，RLS算法收敛速度更快，收敛性更好，但计算量较大．     

Vascular morphology by three-dimensional magnetic resonance imaging

A three-dimensional examination of blood vessels is provided using MR data from seven cases. The vascular surfaces are constructed with an algorithm that automatically follows the selected artery or vein and generates a projected three-dimensional gradient shaded image. Fast 3DFT pulse sequences were optimized to enhance the time-of-flight contrast of the intravascular region. By increasing the surface threshold value in a three-dimensional head study, the flesh of a patient's face was peeled away to demonstrate the superfacial temporal artery. Gated cardiac images show the great vessels and cardiac chambers. A three-dimensional view of the aorta shows an irregular surface in the vicinity of an adrenal tumor. 3D MR exams provide a non-invasive technique for assessing vascular morphology in a clinical setting.     

On the feasibility of antideuteron production and storage at CERN

The new Antiproton Accumulator Complex is now in operation at CERN. We consider the possibility of using this facility to create and store antideuterons and conclude that we could achieve an accumulation rate of about 2·10⁶ particles/day. No major rebuild of the rings is envisaged, but it is thought that modification to existing components and becoming operational would take about 5 to 6 months. We stress, however, that the operation of such a facility and the use of any stack of antideuterons for particle physics would be extremely taxing.     

高温超导体Josephson阵列在磁场中的微波响应与磁通涡旋激发

本文从分析相变电阻率 ρP 和磁通蠕动电阻率 ρF 出发 ,指出当T小于某一温度T0 时 ,ρF>ρP,而当T >T0 时 ,ρF 远小于 ρP,并进一步分析了 ρF 与 ρP 随温度的变化率分布图 ,得出磁通蠕动电阻率 ρF 随温度的变化率分布图跟微波响应曲线具有相似的分布特征 ,结果表明 :高温超导体的非平衡微波响应机制可能与磁通涡旋的激发有关 .     

Negative luminescence from mid-wave infrared HgCdTe diode arrays

A self-referencing, optical modulation technique was used to measure the negative luminescence efficiencies of an array of mid-wave infrared HgCdTe photodiodes with cutoff wavelength 4.6 μm as a function of sample temperature. The internal efficiency at a wavelength of 4 μm was 93% at 295 K, and nearly independent of temperature in the 240–300 K range. This corresponds to an apparent temperature reduction >50 K at room temperature and >30 K at 240 K. Moreover, the reverse-bias saturation current density was only 0.13 A/cm². The measured transmission and emission spectra were simulated using empirical HgCdTe absorption formulas from the literature.     

Explicit 2-Factorisations of the Odd Graph

In this note we show how 1-factors in the middle two layers of the discrete cube can be used to construct 2-factors in the Odd graph (the Kneser graph of (k − 1)-sets from a (2k − 1)-set). In particular, we use the lexical matchings of Kierstead and Trotter, and the modular matchings of Duffus, Kierstead and Snevily, to give explicit constructions of two different 2-factorisations of the Odd graph. This revised version was published online in September 2006 with corrections to the Cover Date.     

Membrane introduction mass spectrometry

An overview of membrane introduction mass spectrometry (MIMS) is presented and comparisons are made with other direct sample introduction techniques. Special attention is given to the unique advantages and the limitations of newer variants on the MIMS technique, including affinity MIMS, reverse-phase and trap MIMS. The salient features of the interfaces used in MIMS are summarized and the various membrane materials commonly used are delineated. The applicability of MIMS is illustrated via discussion of

1. (i) bioreactor monitoring (represented by yeast fermentation),

2. (ii) environmental monitoring (illustrated by analysis of contaminated ground water samples) and

3. (iii) on-line chemical reaction monitoring (exemplified by the photolysis of aryl esters).

The applicability of MIMS to the analysis of environmental samples, including complex mixtures in water, air and soil, is noted.     

THE STUDY OF SERS EFFECT AND ADSORPTION PROPERTY ON Cu SURFACE FOR PNBA

With different amounts of KCl added in the PNBA(p- nitro benzoic acid) aqueous solution, the factors affecting the SERS (Surface Enhanced Raman Scattering) are studied systematically on the surface of Copper. The results show that in PNBA aqueous solution the occurrence of SERS effect stongly depends on the existence of Cl^-. The amount of KCl added affects not only the emergence and the intensity of SERS effect, but also the adsorption properties such as the adsorption manner,etc.