A high precision spectrophotometric method for on-line shipboard seawater pH measurements: the automated marine pH sensor (AMpS)

Measurement strategies for understanding the oceanic CO(2) (carbon dioxide) system are moving towards in situ and ship of opportunity sampling techniques. Automated instrumentation with high accuracy and sampling frequencies will enable a greater understanding of the fluxes of marine carbon and lead to a more reliable constrain on the calculated uptake of anthropogenic CO(2) by the oceans. This paper describes the automated marine pH sensor (AMpS); new instrumentation and methodology for the determination of seawater pH using dual spectrophotometric measurements of sulfonephthalein indicator in a semi-continuous seawater stream. The pH values measured during a recent study in the Weddell Sea are used to illustrate the excellent properties of the AMpS. The method has an on-line precision of better than 0.001 pH units and an estimated accuracy of better than 0.004 pH units. The instrument is compact, portable and has a measurement frequency of 20 samples per hour. The instrument is ideally suitable for operation on ships of opportunity.     

The Formation of Porous Membranes by Filtration of Aerosol Nanoparticles

Flame-generated aerosol particles of Al₂O₃ were deposited by gas filtration on two types of porous and ceramic tubes of -Al₂O₃ with mean pore diameters of 450 and 2700nm, respectively. The particles were aggregates with average mobility diameters in the range of 30–100nm and primary particle diameters of 4–8nm. The particles are characterized by differential mobility analysis, transmission electron microscopy, and by their specific surface area. The deposited membranes are characterized by gas permeability measurements, scanning electron microscopy, and by their pore size distribution from nitrogen capillary condensation. The particles form a distinct, homogeneous membrane layer with a porosity of 90% on top of the substrate surface and only penetrate slightly into the substrate structure. The mean pore sizes of the deposited membranes determined by nitrogen condensation agree approximately with those determined by gas permeation and the specific surface area. The mean pore diameter varies in the range of 30–70nm. The gas permeability of the deposited membranes is related to the specific surface area but influenced by the high porosity. The mean pore size and the permeability of the membranes are almost independent of the substrate structure.The development of a membrane with uniform properties is preceded by a short initial period in which the deposited particles, with an equivalent membrane thickness of roughly 2m, have a significantly lower permeability than the ultimately developed uniform membrane layer. This effect is particularly significant for the aerosol particles with the lowest mean size, probably due to particles deposited in the pore mouths of the substrate.The particles and the deposited membranes are X-ray amorphous but retain their specific surface area on heating to even high temperatures. When the membranes are heated to 1473K for 10h, X-ray diffraction shows a mixture of - and -alumina, accompanied by a partial disintegration of the membrane and a considerable loss of surface area.     

Stability of domoic acid in saline dosing solutions

Studies designed to assess the effects of repeated low doses of domoic acid require an assessment of its stability in solution under the conditions used for in vivo studies. The stability of 1 mg/mL solutions of domoic acid in saline, with or without ascorbic acid, was determined for 15 weeks. Solutions were refrigerated, but warmed to room temperature for several hours each working day to simulate conditions of actual use. The solutions of domoic acid showed no evidence of decomposition as evidenced by stability of UV absorbance spectrum, concentration of domoic acid as determined by a liquid chromatographic method, and the chromatographic elution pattern. The addition of ascorbate to the domoic acid/saline solution did not alter the stability, but was deemed unnecessary because of the firm stability of the domoic acid/saline solution.     

An NMR thermometer for cryogenic magic-angle spinning NMR: the spin-lattice relaxation of (127)I in cesium iodide

The accurate temperature measurement of solid samples under magic-angle spinning (MAS) is difficult in the cryogenic regime. It has been demonstrated by Thurber et al. (J. Magn. Reson., 196 (2009) 84-87) [10] that the temperature dependent spin-lattice relaxation time constant of ⁷⁹Br in KBr powder can be useful for measuring sample temperature under MAS over a wide temperature range (20–296 K). However the value of T₁ exceeds 3 min at temperatures below 20 K, which is inconveniently long. In this communication, we show that the spin-lattice relaxation time constant of ¹²⁷I in CsI powder can be used to accurately measure sample temperature under MAS within a reasonable experimental time down to 10 K.     

Determination of the helical screw sense and side-group chirality of a synthetic chiral polymer from Raman optical activity

Splitting it up: Excellent agreement between the experimental and the quantum-chemically simulated Raman optical activity (ROA) spectrum of (+)-poly(trityl methacrylate) shows that the polymer backbone adopts a left-handed helical conformation while the trityl side groups display a left-handed propeller conformation. Thus ROA can be used to determine the complete structure of synthetic chiral polymers in solution.     

Lift‐off protocols for thin films for use in EXAFS experiments

Lift‐off protocols for thin films for improved extended X‐ray absorption fine structure (EXAFS) measurements are presented. Using wet chemical etching of the substrate or the interlayer between the thin film and the substrate, stand‐alone high‐quality micrometer‐thin films are obtained. Protocols for the single‐crystalline semiconductors GeSi, InGaAs, InGaP, InP and GaAs, the amorphous semiconductors GaAs, GeSi and InP and the dielectric materials SiO₂ and Si₃N₄ are presented. The removal of the substrate and the ability to stack the thin films yield benefits for EXAFS experiments in transmission as well as in fluorescence mode. Several cases are presented where this improved sample preparation procedure results in higher‐quality EXAFS data compared with conventional sample preparation methods. This lift‐off procedure can also be advantageous for other experimental techniques (e.g. small‐angle X‐ray scattering) that benefit from removing undesired contributions from the substrate.