Separation of (Z)- and (E)-isomers of thioxanthene and dibenz[b,e]oxepin derivatives with calixarenes and resorcinarenes as additives in nonaqueous capillary electrophoresis

Five acidic calix[4]arenes with carboxylic or sulfonic groups at either the upper or lower rim of the cavity and one resorc[4]arene were investigated to separate three thioxanthenes (flupentixol, clopenthixol, chlorprothixene) and a dibenz[b,e]oxepin derivative (doxepin) with cis-/trans-isomerism by nonaqueous capillary electrophoresis (NACE). Partial filling of the capillary with the UV-absorbing selectors led to a low detection limit and an advantageous signal-to-noise ratio (S/N). A sufficient electrophoretic mobility of the calixarenes towards the anode was necessary to outweigh the oppositely directed electroosmotic flow (EOF). This depended from the functional groups, the dissociation and the hydrodynamic radius of the cyclophanes. In contrast, the resorcinarene was useable only by addition of sodium dodecyl sulfate (SDS) because only the complex of the two selectors had an anodic apparent electrophoretic mobility. p-Sulfonyl-calix[4]arene (ss-a1) was the most capable selector for all E/Z-isomers with maximal alpha-values ranging from 1.056 for doxepin to 1.224 for chlorprothixene. This was due to the sufficient migration in reversed direction to the EOF even at low pH* values of 3.0. Otherwise, electrostatic as well as hydrophobic interactions with the positively charged isomers seem to contribute to a superior recognition. Increasing the concentration up to 15 mM ss-a1 and using acidic media (pH* 5.0) led to high separation efficiency. Changing the organic solvent provides a powerful tool to improve selectivity with N,N-dimethylformamide-methanol (DMF-MeOH)-mixtures for thioxanthenes. Further electrophoretic parameters were optimized, such as the concentration of the electrolytes, the addition of SDS, the kind of electrolytes and the voltage. Distinct differences in selectivities were found between the derivatives with thioxanthene and dibenzo[b,e]oxepin ring system, respectively. Further, the different basic side chain was responsible for the different selectivity at higher pH* values. In contrast, the substitution at position 2 of the thioxanthenes played a secondary role. Based on the studies of single parameters a method for a simultaneous separation of the four pairs of isomers within 13 min was developed.     

Chromatography Modeling Software Applicability for Non-Conventional Columns: a Case Study of Calixarene- and Resorcinarene-Bonded Stationary Phases

In this study a systematic evaluation of the applicability of DryLab for calixarene- and resorcinarene-bonded stationary phases and some other relatively new reversed-phase columns with the presence of conventional alkyl-bonded phases was carried out. Calixarene- and resorcinarene-bonded stationary phases belong to the reversed-phase materials. However, depending on the analytes, they show some additional interactions, since their steric, polar and ionic properties are different compared to those of conventional alkyl-bonded phases. Three different mixtures of model analytes, consisting of alkyl substituted benzene derivatives, 4-hydroxybenzoic acid esters and polycyclic aromatic hydrocarbons, were used to verify the accuracy of DryLab prediction of retention times and to compare the results of 20 different liquid chromatographic phases. The type and the content of the organic modifier as well as the temperature and the gradient time were systematically changed using same conditions for all stationary phases. The results showed that the prediction on the calixarene- and resorcinarene-bonded stationary phases as well as on other reversed-phase columns is highly accurate in both isocratic and gradient modes. The predictions and real experiments were highly correlated with an average absolute error (∆t _R) of 0.027 min (<2 s) and an average percent absolute error (%∆t _R) of 0.38 on the calixarene- and resorcinarene-bonded stationary phases, and ∆t _R of 0.04 min (<3 s); %∆t _R of 0.51 on the other reversed-phase columns in this study. As a result, DryLab could be applied with very accurate predictions in method development using calixarene- and resorcinarene-bonded stationary phases, which were used as an example for “new” stationary phase materials.

     

Evaluation of the Chromatographic Performance of Conventional, Polar-Endcapped and Calixarene-Bonded Stationary Phases for the Separation of Water-Soluble Vitamins

The performance of four different reversed-phase columns which included a conventional C₁₈ phase, a C₁₈ polar-endcapped phase, an ether-linked phenyl polar-endcapped phase and a calixarene-bonded phase has been systematically compared for the separation of mixture of some water-soluble vitamins containing basic, neutral and acidic compounds of different polarities, as well as different functional groups at three pH levels and different proportions of buffer/methanol. The characteristics of water-soluble vitamins make this combination of compounds very useful as a test mixture to check column performance with real samples. Due to the physical and chemical differences between these compounds, the type of chosen column has a significant influence on the chromatographic behavior. Results of this comparison show that the C₁₈ polar-endcapped phase was the most suitable for the separation of this group of vitamins. The presence of a polar group as an endcapping agent does not seem to influence the overall hydrophobic nature of the polar-endcapped stationary phases. At the same time, these phases displayed enhanced hydrogen bonding and silanol activity.     

Selectivity of Calixarene-bonded Silica-phases in HPLC: Description of Special Characteristics with a Multiple Term Linear Equation at Two Different pH-Values

Six different calixarene-bonded phases were characterized by analyzing 36 and 26 solutes at pH 3 and 7, respectively. Dolan and Snyder's multiple term linear equation was used to correlate retention factors k' to parameters of the solutes and columns. The column parameters have been related to molecular properties of the stationary phases and new suggestions were made for the interpretation of steric selectivity. Ionic and polar interactions have been found dependent on pH value, while steric interactions are less dependent and hydrophobic interactions remain unchanged. Distinct differences of the supported interactions were confirmed between the calixarene-bonded and the common alkyl-bonded silicas. By use of the parameters, values of k' can be estimated with an average deviation of 2.50 and 7.92% at low and neutral pH-value, respectively.     

Characterization of calixarene‐bonded stationary phases

Calixarene‐bonded stationary phases received growing interest in HPLC as stationary phases with special retention characteristics and selectivity. The commercially available unsubstituted and p‐tert‐butyl‐substituted Caltrex^® columns have been intensively studied and characterized in our workgroup. They can be used as reversed phases, yet they support additional interactions. Especially, their steric, polar and ionic properties differ from conventional alkyl‐bonded phases. However, also the hydrophobic interaction shows differences since adsorption and partition interactions on or in a bonded layer of calixarenes are not similar to those of alkyl‐bonded layers. The relative strength of the hydrophobic properties of the stationary phases has been found depending on the methanol concentration of the mobile phase. Generally, the dependencies of their interaction strengths on mobile‐phase conditions, e.g. the change of the intensity of the hydrogen‐bonding abilities with decreasing methanol content, are not similar from phase to phase either. This probably gives calixarene‐bonded stationary phases enhanced suitability for analyses at extreme compositions of the mobile phase. An overview about the synthesis, retention and selectivity properties of Caltrex^® columns is given here.     

Cationic NHC-Phosphine Iridium Complexes: Highly Active Catalysts for Base-Free Hydrogenation of Ketones

Novel bidentate N-heterocyclic carbene-phosphine iridium complexes have been synthesized and evaluated in the hydrogenation of ketones. Reported catalytic systems require base additives and, if excluded, need elevated temperature or high pressure of hydrogen gas to achieve satisfactory reactivity. The developed catalysts showed extremely high reactivity and good enantioselectivity under base-free and mild conditions. In the presence of 1 mol % catalyst under 1 bar hydrogen pressure at room temperature, hydrogenation was complete in 30 minutes giving up to 96 % ee. Again, this high reactivity was achieved in additive-free conditions. Mechanistic experiments demonstrated that balloon pressure of hydrogen was sufficient to form the activate species by reducing and eliminating the 1,5-cyclooctadiene ligand. The pre-activated catalyst was able to hydrogenate acetophenone with 89 % conversion in 5 min.     

Retention behaviour of beta-blockers in HPLC using a monolithic column

The chromatographic behaviour of a new HPLC-stationary phase (Chromolith RP-18e) is described for separation of beta-blockers. The effects of the different chromatographic conditions (buffer system, pH value, content of organic modifier, injection volume and flow rate) on the separation behaviour were studied. At higher flow rates the peaks seemed to be more symmetrical than at lower flow rates. The use of buffer or salt in the mobile phase for this separation is found to be very essential and the counter-anion type of this buffer or salt significantly affected the retention behaviour of beta-blockers while the cation type did not play the same important role.     

Small-crack closure measurements in titanium alloys

An automated interferometric displacement gage was used to monitor crack-mouth-opening behavior of naturally initiated small surface cracks in a series of titanium alloys having a range of microstructures and deformation characteristics. Findings indicate that the transient development of crack closure plays a significant role in the early propagation of small fatigue cracks.Paper was presented at the 1988 SEM Spring Conference on Experimental Mechanics held in Portland, OR on June 6–10.