茶碱对聚苯胺尿酸酶电极的生物电化学活性的抑制

用聚苯胺尿酸酶电极研究了茶碱对固定酶的影响，结果表明，茶碱对固定尿酶酶有明显的抑制作用，但这种抑制作用是可逆的，在茶碱的存在下，ＰＨ对酶电极的响应电流影响与无茶碱存在时不同；在０．２－０．５Ｖ之间，酶电极的响应电流随电位加而迅速升高，当电位进一步升高时，其变化速度减慢，茶碱使尿酶酶催化反应的活化能从无抑制剂存在的时的２９．９ｋＪ．ｍｏｌ＾－１提高到４７．８ｋＪ．ｍｏｌ＾－１，即抑制剂改变了尿酸催化     

聚苯胺尿酸酶电极性能的研究

依据pH对聚苯胺尿酸酶电极最大响应电流的影响, logim～pH图表明尿酸酶电极的催化活性只与其电离基团的碱性形式有关. 扫描电镜的结果表明, 聚苯胺尿酸酶电极的稳定性与其制备方法有关. 电化学法固定的尿酸酶电极具有高的稳定性.     

An Encryption Algorithm for Region of Interest in Medical DICOM Based on One-Dimensional eλ-cos-cot Map

Today, with the rapid development of the Internet, improving image security becomes more and more important. To improve image encryption efficiency, a novel region of interest (ROI) encryption algorithm based on a chaotic system was proposed. First, a new 1D eλ-cos-cot (1D-ECC) with better chaotic performance than the traditional chaotic system is proposed. Second, the chaotic system is used to generate a plaintext-relate keystream based on the label information of a medical image DICOM (Digital Imaging and Communications in Medicine) file, the medical image is segmented using an adaptive threshold, and the segmented region of interest is encrypted. The encryption process is divided into two stages: scrambling and diffusion. In the scrambling stage, helical scanning and index scrambling are combined to scramble. In the diffusion stage, two-dimensional bi-directional diffusion is adopted, that is, the image is bi-directionally diffused row by column to make image security better. The algorithm offers good encryption speed and security performance, according to simulation results and security analysis.     

均匀聚焦磁场中束晕-混沌的孤子控制

采用粒子.束核模型,对均匀聚焦磁场中满足K-V分布的离子束进行模拟研究.观察到束晕.混沌现象,基于束晕.混沌的非线性控制策略,提出控制束晕.混沌的孤子函数控制器,并给出具体的实施方案.模拟研究表明,运用这种方法可以消除束晕及其再生现象,达到对束晕.混沌的有效控制.     

基于2-硫代海因的氟离子探针

通过异亮氨酸甲酯盐酸盐与4-硝基苯基异硫氰酸酯或4-氰基苯基异硫氰酸酯反应合成2-硫代海因探针1和2.在N,N-二甲基甲酰胺(DMF)中,用系列含阴离子的四正丁基铵盐来评价其阴离子识别能力.加入F-后,1和2的DMF溶液由无色立即变为黄色,而加入Cl-,4HSO-,Br-,3NO-和3 2CH CO-均不变,表明1和2对氟离子显示出良好的识别性能.核磁滴定氢谱揭示了F-与2-硫代海因的氢键作用引发了1和2的识别,结合常数显示1比2对F-更敏感.此外,1作为化学传感器还可以制成试纸检测F-.     

百kV级纳秒脉冲源的设计与实验研究

GW级Tesla型脉冲源在触发开关技术研究中作为触发脉冲源使用,抖动较大,触发开关工作不稳定,需要为其研制一台触发器以解决这一问题。结合其他使用需求,设计了一台百kV级纳秒脉冲源,该脉冲源采用Tesla变压器结合单筒脉冲形成线结构,进行了Tesla变压器结构、Tesla变压器初次级参数、Tesla开路磁芯与初级电路设计,调试结果为：最高输出电压100 kV,峰值功率250 MW,重复频率1~100 Hz,输出脉冲宽度约4 ns,前沿约1 ns。该脉冲源作为触发器使用,可以将GW级Tesla型纳秒脉冲源抖动由500 ns降低至150 ns,满足触发开关研究需求,还可用于产生超宽谱短脉冲进行辐射。     

Tribological behaviors of a novel trilayer nanofilm: the influence of outer chain length and interlayer thickness

Polydopamine (coded as PDA) is reported to be very adhesive and reactive due to the attached functional groups, such as amine and hydroxyl groups. In this work, taking advantage of the condensation between Si–OH of the hydroxylated alkyltrichlorosilane (ATS) and C–OH on PDA surface, ATS molecules with different chain carbon number of 10, 14 and 18 were grafted onto the 3‐aminopropyl triethoxysilane (APTES)‐PDA dual‐layer film, which was composed of PDA outerlayer and APTES underlayer, on Si substrate. Thus, hydrophobic trilayer films coded as APTES‐PDA‐ATS were prepared successfully. In order to reveal the dependence of the tribological behaviors upon the microstructures of the film, tribological experiments were conducted on an atomic force microscope and a ball‐on‐plate tribometer. Experimental results showed that the (micro‐) friction reducing (characterized by a parameter of relative friction coefficient or friction coefficient, RFC or FC) and macro‐wear resisting (characterized by anti‐wear life) behaviors were related with the chain length of outerlayer and the PDA thickness. Specifically, on one hand, as the chain length increases, RFC/FC decreased and macro anti‐wear life lengthened; on the other hand, as PDA gets thicker, RFC increased and the anti‐wear life enhanced. Copyright © 2013 John Wiley & Sons, Ltd.     

CALCULATION METHODS ON CRACK RESISTANCE CAPACITY OF CONNECTION COMPOSED OF CSSEUHSC COLUMNS AND SEC BEAMS

In order to investigate the calculation methods on crack resistance capacity of connection composed of cross shaped steel encased ultra high strength concrete (CSSEUHSC) columns and steel encased concrete (SEC) beams under cycle loads, six interior connection specimens were tested in the laboratory. A discussion on the crack resistance capacity was presented. Calculation methods of crack resistance capacity were deduced based on the experimental case and calculation results were in good agreement with the experimental results. The research results indicated that parameters of connection composed of CSSEUHSC columns and SEC beams with better crack resistance performance may be referred for engineering application.     

Investigation on cell biocompatible behaviors of polyaniline film fabricated via electroless surface polymerization

Considering for the potential application in tissue engineering, polyaniline (PANi) film was fabricated via a two-step route: a self-assembled monolayer of C₆H₅NHC₃H₆Si(OMe)₃ was firstly formed on the single-crystal Si substrate; the conducting PANi film was then prepared through electroless surface polymerization of the aniline molecules on the aniline monolayer-bearing silane surface in an acidic aqueous solution. The formation of PANi film on Si surface was confirmed by characterizations of X-ray photoelectron spectroscope (XPS) and specular reflectance Fourier transform infrared (SR-FTIR) spectrum, etc. At last, the proliferation behaviors of PC-12 cells on the PANi film surface were studied by the [3-(4,5-dimethyldiazol-2-yl)-2,5-diphenyl tetrazolium bromide] (MTT) colorimetric assays, acridine orange fluorometric staining, and scanning electron microscope (SEM) observation, etc. The results demonstrate that the as-prepared PANi film provides high ability for cell proliferation, exhibiting promising potentials as surface coating to cultivate neuronal cells for applications in the tissue engineering.     

Effect of stearic acid, zinc stearate coating on the properties of synthetic hydromagnesite

Synthetic hydromagnesite (SHM), used as flame retardant for polymers, may have similar or better flame retardancy effectiveness than aluminum tri-hydroxide (ATH) and magnesium di-hydroxide (MDH). Suitable surface modifiers are often employed to improve its dispersion and compatibility with polymer matrix. In this study, we chose stearic acid (SA) and zinc stearate (ZS) as the surface modifier, and investigated the properties of SHM modified with various surface modifier content using dry blending coating process. Scanning electron microscope (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetry (TG), particle size distribution, contact angle, oil absorption, bulk density, tapped density and Carr's index were employed to characterize the effect of surface modification. The results showed that the surface of SHM powders was changed from hydrophilic to lipophilic. The flowability of the surface modified powder was also improved. TG graphs showed that the surface modifier had no obvious influence on the degradation pathway of the SHM.