金催化化学发光新体系——苯并吡喃化学发光分析法测定金矿中的痕量金

本文提出了一种测定矿样中痕量金的化学发光分析法,氯化6,7-二羟基-2,4-二甲基苯并吡喃-H_2O_2化学发光体系,方法的检出限为7ppb。工作曲线线性范围是10～1000ppbAu,测定的相对标准偏差小于7％。应用本法测定矿样中的金,结果良好。     

制备方法对WO_3/ZrO_2结构的影响

用XRD、比表面测定、LRS定性和定量的方法对用Zr（OH）4和已晶化的ZrO2作载体制得的两类WO3／ZrO2催化剂进行了表征．揭示了样品比表面、载体物相、活性组分的存在状态与制备方法、WO3含量、焙烧温度之间的关系．结果表明，WO3能单层分散在ZrO2上；单层覆盖在Zr（OH）4上的WO3使载体在焙烧时晶粒生长受阻，形成介稳的四方ZrO2，并阻止载体微粒间的烧结，使从Zr（OH）4出发制得的WO3／ZrO2比表面明显增大，在WO3含量达到单层分散容量时以上作用表现得最充分；WO3与Zr（OH）4（或四方ZrO2）在高温（～800℃）可能发生了某种化学结合，开创出超强酸位．用以上观点可对文献中已报导的主要实验事实作出较满意的解释.     

Changes in the composition of volatile monoterpenes and sesquiterpenes of Pinus armandi, P. tabulaeformis, and P. bungeana in Northwest China

The volatile mono-and sesquiterpenes obtained from the needles and resin of Pinus armandi, P. tabulaeformis, and P. bungeana growing in the Qinling, Taibai, and Huanglong Mountain forest ecosystem were analyzed by means of GC-MS. Forty-eight constituents were identified, and α-pinene, β-pinene, 1R-α-pinene, β-caryophyllene, cadindiene, α-caryophyllene, D-limonene, and 1S-β-pinene were the major components of the mono-and sesquiterpenes in the needles and resin. The components of the volatile mono-and sesquiterpenes from the needles and resin at Qinling, Taibai, and Huanglong Mountains had remarkable differences in three pine species, whereas the monopertene content such as α-pinene, β-pinene, D-limonene, and camphene were mostly changed in the growing stage. The intraspecies variation in the different ecosystems can be attributed to the species’ geography and genetic variation, and even the adaptation of the pine species to different ecological environments. Moreover, monoterpenes and sesquiterpenes can be induced by the attack of bark beetles, of which the α-pinene, β-pinene, 1R-α-pinene, 1S-α-pinene, b-myrecene, and β-caryophyllene contents had positive relations with the attacking Dendroctonus armandi and D. valens. Published in Khimiya Prirodnykh Soedinenii, No. 5, pp. 430–433, September–October, 2006.     

Effect of quantitative characteristic structure of resole phenolic prepolymer resin on thermal stability,pyrolysis behaviors,and ablation properties

Journal of Thermal Analysis and Calorimetry - The chemical structure of resole phenolic prepolymer resin is difficult to be accurately described because it is a mixture composed of different...     

制备参数对Au／Fe2O3催化剂水煤气变换性能的影响

 采用共沉淀法制备了Au／Fe2O3催化剂，并系统地考察了制备参数对其催化WGS性能的影响．通过BET，XRD，XRF，H2－TPR和HRTEM等表征手段，初步考察了Au／Fe2O3催化剂具有高催化活性的原因．结果表明，金负载量、沉淀剂种类、沉淀方式、沉淀pH值、焙烧气氛和焙烧温度对Au／Fe2O3催化剂的催化性能均具有较大的影响．Au／Fe2O3催化剂的低温高活性是纳米Au与Fe3O4协同作用的结果；Au／Fe2O3催化剂的高温活性是由于活性相Fe3O4起主要作用的结果．纳米Au粒子的烧结会降低其催化活性．     

“One pot” homogeneous synthesis of thermoplastic cellulose acetate-graft-poly(l-lactide) copolymers from unmodified cellulose

Using native cellulose as the starting material, cellulose acetate-graft-ploy (l-lactide) (CA-g-PLA) copolymers were successfully synthesized by “one-pot” process in an ionic liquid 1-allyl-3-methylimidazolium chloride (AmimCl). In this process, cellulose was first reacted with acetic anhydride, yielding cellulose acetate (CA), and then ring opening graft copolymerization of l-lactide was carried out from the residual hydroxyl groups of CA in the same solution using 4-dimethylaminopridine (DMAP) as the catalyst. Both acetyl and ploy (l-lactide) contents in CA-g-PLA copolymers could be well controlled by changing reaction conditions. The structures and thermal properties of CA-g-PLA copolymers were characterized. The glass transition temperature T_g of copolymers decreased with increasing PLA content. Compared to the pure PLA and cellulose-graft-PLA copolymers, the CA-g-PLA copolymers possessed better thermo mechanical properties in a temperature range of 60–130 °C. When the molar substitution of PLA (MS_PLA) was above 1.71, the CA-g-PLA copolymers exhibited thermoplastic behavior and could be processed by conventional thermal processing methods, such as injection molding and melt spinning.     

Detection of MicroRNAs using target-guided formation of conducting polymer nanowires in nanogaps

A nanogapped microelectrode-based biosensor array is fabricated for ultrasensitive electrical detection of microRNAs (miRNAs). After peptide nucleic acid (PNA) capture probes were immobilized in nanogaps of a pair of interdigitated microelectrodes and hybridization was performed with their complementary target miRNA, the deposition of conducting polymer nanowires, polyaniline (PAn) nanowires, is carried out by an enzymatically catalyzed method, where the electrostatic interaction between anionic phosphate groups in miRNA and cationic aniline molecules is exploited to guide the formation of the PAn nanowires onto the hybridized target miRNA. The conductance of the deposited PAn nanowires correlates directly to the amount of the hybridized miRNA. Under optimized conditions, the target miRNA can be quantified in a range from 10 fM to 20 pM with a detection limit of 5.0 fM. The biosensor array is applied to the direct detection of miRNA in total RNA extracted from cancer cell lines.     

Nonaqueous and aqueous-organic media for the enantiomeric separations of neutral organophosphorus pesticides by CE

The enantiomeric separation of some poorly water-soluble organophosphorus pesticides (OPs) has been investigated using nonaqueous solvent and aqueous-organic solvent systems. In this work, sodium cholate (SC) either with SDS or gamma-CD was used to achieve enantiomeric separations of four neutral and poorly water-soluble OPs, i.e., profenofos, prothiofos, sulprofos, and pyraclofos. Electrophoretic medium consisted of a mixture of methanol (MeOH) with ACN (4:1 v/v) or a mixture of MeOH with H(2)O and ACN (5:4:1 v/v/v). On one hand, NACE was applied for enantiomeric separation of pyraclofos using a large amount of chiral and achiral surfactants (SC and SDS). On the other hand, H(2)O was added to act as a solvent additive to increase the solubility of gamma-CD in the organic solvents such as MeOH and ACN, in which the solubility of gamma-CD was very low. The presence of H(2)O was found to be particularly useful for the enantiomeric separation of profenofos, prothiofos, and sulprofos. In this way, the range of application of the neutral CDs in CE has been extended. In addition, SC was used as the only electrolyte. The proposed method has been applied for the analysis of soil samples.     

Transparent and flame retardant cellulose/aluminum hydroxide nanocomposite aerogels

Cellulose-based nanocomposite aerogels were prepared by incorporation of aluminum hydroxide (AH) nanoparticles into cellulose gels via in-situ sol-gel synthesis and following supercritical CO₂ drying. The structure and properties of cellulose/AH nanocomposite aerogels were investigated by Fourier transform infrared spectroscopy, scanning electron microscopy, ultraviolet-visible spectrometry, N₂ adsorption, thermogravimetric analysis, and micro-scale combustion calorimetry. The results indicated that the AH nanoparticles were homogeneously distributed within matrix, and the presence of AH nanoparticles did not affect the homogeneous nanoporous structure and morphology of regenerated cellulose aerogels prepared from 1-allyl-3-methylimidazolium chloride solution. The resultant nanocomposite aerogels exhibited good transparency and excellent mechanical properties. Moreover, the incorporation of AH was found to significantly decrease the flammability of cellulose aerogels. Therefore, this work provides a facile method to prepare transparent and flame retardant cellulose-based nanocomposite aerogels, which may have great potential in the application of building materials.