Photoelectrochemical Cytosensors

Photoelectrochemical (PEC) cytosensors, a combination of the PEC process and the living-cell assay, have emerged as a powerful tool in the analytical and biological science. This mini review provides a brief introduction of this arena and summaries the key steps about the development of PEC cytosensors with representative examples, followed by future prospects based on our own opinions.     

In-channel indirect amperometric detection of nonelectroactive anions for electrophoresis on a poly(dimethylsiloxane) microchip

In the present paper, we describe a microfluidics-based sensing system for nonelectroactive anions under negative separation electric field by mounting a single carbon fiber disk working electrode (WE) in the end part of a poly(dimethylsiloxane) microchannel. In contrast to work in a positive separation electric field described in our previous paper (Anal. Chem. 2004, 76, 6902-6907), here the electrochemical reduction reaction at the WE is not coupled with the separation high-voltage (HV) system, whereas the electrochemical oxidation reaction at the WE is coupled with the separation HV system. The electroactive indicator is the carbon fiber WE itself but not dissolved oxygen. This provides a convenient and sensitive means for the determination of nonelectroactive anions by amperometry. The influences of separation voltage, detection potential, and the distance between the WE and the separation channel outlet on the response of the detector have been investigated. The present detection mode is successfully used to electrochemically detect F-, Cl-, SO4(2-), CH3COO-, H2PO4-. Based on the preliminary results, a detection limit of 2 microM and a dynamic range up to three orders of magnitude for Cl- could be achieved.     

Solid-contact potentiometric sensor for ascorbic acid based on cobalt phthalocyanine nanoparticles as ionophore

A novel solid-contact potentiometric sensor for ascorbic acid based on cobalt phthalocyanine nanoparticles (NanoCoPc) as ionophore was fabricated without any need of auxiliary materials (such as membrane matrix, plasticizer, and other additives). The electrode was prepared by simple drop-coating NanoCoPc colloid on the surface of a glassy carbon electrode. A smooth, bright and blue thin film was strongly attached on the surface of the glassy carbon electrode. The electrode showed high selectivity for ascorbic acid, as compared with many common anions. The influences of the amount of NanoCoPc at the electrode surface and pH on the response characteristics of the electrode were investigated. To overcome the instability of the formal potential of the coated wire electrode, a novel electrochemical pretreatment method was proposed for the potentiometric sensor based on redox mechanism. This resulting sensor demonstrates potentiometric response over a wide linear range of ascorbic acid concentration (5.5 × 10⁻⁷ to 5.5 × 10⁻² M) with a fast response (<15 s), lower detection limit (ca. 1.0 × 10⁻⁷ M), and a long-term stability. Furthermore, microsensors based on different conductors (carbon fiber and Cu wire) were also successfully fabricated for the determination of practical samples.     

The video-rate imaging of sub-10 nm plasmonic nanoparticles in a cellular medium free of background scattering

Plasmonic nanoparticles (e.g., gold, silver) have attracted much attention for biological sensing and imaging as promising nanoprobes. Practical biomedical applications demand small gold nanoparticles (Au NPs) with a comparable size to quantum dots and fluorescent proteins. Very small nanoparticles with a size below the Rayleigh limit (usually <30–40 nm) are hard to see by light scattering using a dark-field microscope, especially within a cellular medium. A photothermal microscope is able to detect very small nanoparticles, down to a few nanometers, but the imaging speed is usually too slow (minutes to hours) to image living cell processes. Here an absorption modulated scattering microscopy (AMSM) method is presented, which allows for the imaging of sub-10 nm Au NPs within a cellular medium. The unique physical mechanism of AMSM offers the remarkable ability to remove the light scattering background of the cellular component. In addition to having a sensitivity comparable to that of photothermal microscopy, AMSM has a much higher imaging speed, close to the video rate (20 fps), which allows for the dynamic tracking of small nanoparticles in living cells. This AMSM method might be a valuable tool for living cell imaging, using sub-10 nm Au NPs as biological probes, and thereby unlocking many new applications, such as single molecule labeling and the dynamic tracking of molecular interactions.

An absorption modulated scattering microscopy technique that allows for the imaging of sub-10 nm gold nanoparticles within a cellular scattering medium is presented.     

Fabrication of poly(dimethylsiloxane) microfluidic system based on masters directly printed with an office laser printer

Applications of poly(dimethylsiloxane) (PDMS)-based microfluidic systems are more popular nowadays. Previous fabrication methods of the masters for PDMS microchannels require complicated steps and/or special device. In this paper, we demonstrated that the toner printed on the transparency film with the office laser printer (1200 dpi) can be used as the positive relief of the masters. The transparency film was printed in two steps in order to obtain the same printing quality for the crossed lines. With the laser-printed master, the depth of the fabricated PDMS microchannels was ca. 10 microm and the smallest width was ca. 60 microm. Surface characteristics of the PDMS/PDMS microchannels were performed with SEM. Their electrokinetic properties were investigated by the aids of the measurement of electroosmotic flow (EOF) and the Ohm's curve. Using the PDMS/PDMS microchip CE systems, electroactive biological molecules and non-electroactive inorganic ions were well separated, respectively. This simple approach could make it easy to carry out the studies of PDMS microfluidic systems in more general labs without special devices.     

A rapid and sensitive method for the determination of trace proteins based on the interaction between proteins and Ponceau 4R

The interactions between proteins and Ponceau 4R (PR) in aqueous solution have been studied by the techniques of resonance light scattering (RLS) spectroscopy, the absorption spectroscopy, zeta potential assay and circular dichroism (CD) spectrum. The dry PR can assemble on the surface of protein via electrostatic and hydrophobic forces to produce an associated compound of protein-PR, this compound can enhance the RLS of protein. Based on this fact, a simple, rapid, and sensitive method has been developed for the determination of proteins at nanogram level by RLS technique with a common spectrofluorimeter. Under optimum conditions, the linear range is 0.10-39.2 μg mL⁻¹ for the determination of both bovine serum albumin (BSA) and human serum albumin (HSA). The detection limits (S/N = 3) are 6.96 ng mL⁻¹ for BSA and 5.71 ng mL⁻¹ for HSA, respectively. There is almost no interference from amino acids, most of the metal ions, and other coexistent substances. The method has been satisfactorily applied to the direct determination of the total protein in human serum.     

Amperometric determination of ascorbic acid at a novel ‘self-doped’ polyaniline modified microelectrode

A ‘self-doped’ polyaniline modified microelectrode, prepared by cyclic potential sweep on a microdisk gold electrode from –0.2 to 0.85 V in 0.5 mol/L sulfuric acid containing aniline and o-aminobenzoic acid, has been developed. The copolymerized process and the resulting polymer characteristics were investigated in detail. This composite film indicated a good electrochemical activity in a wide pH range even in basic solution. Meanwhile, the redox couple exhibited an excellent electrocatalytic activity for the oxidation of ascorbic acid. The oxidation overpotential of ascorbic acid was decreased over 200 mV at this modified electrode compared with a bare gold one. Moreover, the effects of film thickness and pH on the catalytic efficiency were further studied. The dependence of catalytic currents on the concentration of ascorbic acid was linear in the range of 1.2 × 10^–5～ 2.4 × 10^–3 mol/L with a correlation coefficient of 0.996. Also, the determination of ascorbic acid in actual samples was evaluated and the results are satisfactory.     

Phenomenological studies on B~0 → [K~-π~+]_(S/V)[π~+π~-]_(V/S) → K~-π~+π~+π~- decay

Within the quasi-two-body decay model,we study the localized CP violation and branching fraction of the four-body decay B~0→[K~-π~+]_(s/V)[π~+π~-]_(V/)S→K-π~+π~-π~+ when the K~-π~+and π~-π~+ pair invariant masses are0.35 m(K~-π~+)2.04 GeV and 0 mπ~-π~+1.06 GeV,with the pairs being dominated by the K_0~*(700)~0,K~*(892)~0,K~*(1410)~0,K_0~*(1430) and K~*(1680)~0,and fo(500),ρ~0(770),ω(782) and fo(980) resonances,respectively.When dealing with the dynamical functions of these resonances,fo(500),ρ~0(770),fo(980) and K_0~*(1430) are modeled with the Bugg model,Gounaris-Sakurai function,Flatte formalism and LASS lineshape,respectively,while the others are described by the relativistic Breit-Wigner function.Adopting the end point divergence parameters ρA ∈[0,0.5] andΦ_A∈[0,2π],our predicted results are F_(CP)(B~0→K~-π~+π~+π~-)∈[-0.365,0.447] and B(B~0→K-π~+π~+π~-)∈[6.11,185.32] x 10~(-8),based on the hypothetical qq structures for the scalar mesons in the QCD factorization approach.Meanwhile,we calculate the CP violating asymmetries and branching fractions of the two-body decays B~0→SV(VS) and all the individual four-body decays B~0→SV(VS)→K~-π~+π~-π~+,respectively.Our theoretical results for the two-body decays B~0→K~*(892)~0 fo(980),B~0→K_0~*(1430)~0ω(782),B~0→K~*(892)~0 f~0(980),B~0→K_0~*(1430)~0ρ,and B~0→(1430)~0ω are consistent with the available experimental data,with the remaining predictions await testing in future high precision experiments.     

He+H2+→HeH++H反应的从头算势能面

运用多参考组态相互作用(MRCI)方法及aug-cc-pv5z基组构造了HeH+2体系基态(12A′)从头算势能面.采用多体展开法共拟合了8840个能量点,拟合误差为0.0677 Kcal/mol.基于新势能面,采用准经典轨线方法计算了碰撞能在0～2 eV范围内的积分反应截面,计算结果与实验结果符合较好.     

Separation of proteins on surface-modified poly(dimethylsiloxane) microfluidic devices

Separation and detection of proteins have been realized on nonionic surfactant-modified poly(dimethylsiloxane) (PDMS) microfabricated devices with end-column amperometric detection. The hydrophobic PDMS channels are turned into hydrophilic ones after being modified with Brij35 and facilitate the separation of proteins. The coating can remarkably reduce the adsorption of large protein molecules and is stable in the range of pH 6-12. The detection of proteins in such channels needs less rinsing time and thus efficiency is raised. Even large molecules of proteins can also be detected with better reproducibility and enhanced plate numbers. The relative standard deviation (RSD) of the migration time for glucose oxidase (GOD) is 2.2% (n = 19). Separation of GOD and myoglobin has been developed in modified channels. Predominant operational variables, such as the coating conditions, the concentration of surfactant and buffer, are studied in detail.