Electrode reaction of zinc ions at a dropping mercury electrode in ammonium sulphate solutions

The electrode reaction of Zn(II) at a DME in aqueous solutions of (NH₄)₂SO₄ has been studied by d.c. and square-wave polarography at 25.0±0.1°C. The electrochemical kinetic parameters for the reaction are determined. The appearance of the second wave in the square-wave polarogram has been attributed to the low values of the rate parameter and the transfer coefficient.     

On-chip electrochromatography using sol-gel immobilized stationary phase with UV absorbance detection

A chromatography column on a chip was fabricated by immobilizing reversed-phase stationary phase particles (5 microm, C4) using sol-gel technology. Channels were fabricated in quartz using photolithography and wet etching. Localization of the stationary phase was achieved by immobilizing the stationary phase at the desired location in the separation channel prior to bonding of the cover plate. Cross channel design was employed for gated injection. An optical fiber setup was developed for carrying out on-chip UV absorbance detection. The effective optical path length was theoretically determined for the trapezoidal shaped channel and the result was shown to match closely with the experimentally determined value. The effect of applied voltage on velocity was evaluated using thiourea as an unretained marker. Separation performance of the stationary phase was demonstrated by separation of three peptides (Trp-Ala, Leu-Trp and Trp-Trp) under isocratic chromatographic conditions.     

3β‐(1‐Allyl‐1‐pyrrolidinio)‐16‐(2‐pyridylmethylene)androst‐5‐en‐17β‐ol bromide hemihydrate

The title compound, C₃₂H₄₅N₂O⁺·Br^?·0.5H₂O, has the outer two six‐membered rings in chair conformations, while the central ring is in an 8β,9α‐half‐chair conformation. The five‐mem­bered ring of the steroid nucleus adopts a slightly deformed 14α‐envelope conformation. The pyridyl­methyl­ene moiety has an E configuration with respect to the hydroxyl group at position 17. The structure is stabilized by a network of O—H?Br‐type intermolecular hydrogen bonds.     

16‐(4‐Cyanobenzylidene)‐3β‐pyrrolidinoandrost‐5‐en‐17β‐ol monohydrate

In the title compound, C₃₁H₄₀N₂O·H₂O, the outer two six‐membered rings are in chair conformations, while the central ring is in an 8β,9α‐half‐chair conformation. The five‐membered ring adopts a 13β‐envelope conformation and the cyano­benzyl­idene moiety has an E configuration with respect to the hydroxyl group at position 17. The steroid nuclei are linked by intermolecular O—H?O and O—H?N hydrogen bonds to form a molecular network. The molecular packing has an interesting feature, with the steroids aligned parallel to the b axis, forming a closed loop through hydrogen bonds linked via water mol­ecules.     

Numerical Investigation of Graphene as a Back Surface Field Layer on the Performance of Cadmium Telluride Solar Cell

This paper numerically explores the possibility of ultrathin layering and high efficiency of graphene as a back surface field (BSF) based on a CdTe solar cell by Personal computer one-dimensional (PC1D) simulation. CdTe solar cells have been characterized and studied by varying the carrier lifetime, doping concentration, thickness, and bandgap of the graphene layer. With simulation results, the highest short-circuit current (I_sc = 2.09 A), power conversion efficiency (η = 15%), and quantum efficiency (QE~85%) were achieved at a carrier lifetime of 1 × 10³ μs and a doping concentration of 1 × 10¹⁷ cm⁻³ of graphene as a BSF layer-based CdTe solar cell. The thickness of the graphene BSF layer (1 μm) was proven the ultrathin, optimal, and obtainable for the fabrication of high-performance CdTe solar cells, confirming the suitability of graphene material as a BSF. This simulation confirmed that a CdTe solar cell with the proposed graphene as the BSF layer might be highly efficient with optimized parameters for fabrication.     

Phenothiazine–BODIPY–Fullerene Triads as Photosynthetic Reaction Center Models: Substitution and Solvent Polarity Effects on Photoinduced Charge Separation and Recombination

Novel photosynthetic reaction center model compounds of the type donor₂–donor₁–acceptor, composed of phenothiazine, BF₂‐chelated dipyrromethene (BODIPY), and fullerene, respectively, have been newly synthesized using multistep synthetic methods. X‐ray structures of three of the phenothiazine‐BODIPY intermediate compounds have been solved to visualize the substitution effect caused by the phenothiazine on the BODIPY macrocycle. Optical absorption and emission, computational, and differential pulse voltammetry studies were systematically performed to establish the molecular integrity of the triads. The N‐substituted phenothiazine was found to be easier to oxidize by 60 mV compared to the C‐substituted analogue. The geometry and electronic structures were obtained by B3LYP/6‐31G(dp) calculations (for H, B, N, and O) and B3LYP/6‐31G(df) calculations (for S) in vacuum, followed by a single‐point calculation in benzonitrile utilizing the polarizable continuum model (PCM). The HOMO?1, HOMO, and LUMO were, respectively, on the BODIPY, phenothiazine and fullerene entities, which agreed well with the site of electron transfer determined from electrochemical studies. The energy‐level diagram deduced from these data helped in elucidating the mechanistic details of the photochemical events. Excitation of BODIPY resulted in ultrafast electron transfer to produce PTZ–BODIPY^.+–C₆₀^.?; subsequent hole shift resulted in PTZ^.+–BODIPY–C₆₀^.? charge‐separated species. The return of the charge‐separated species was found to be solvent dependent. In nonpolar solvents the PTZ^.+–BODIPY–C₆₀^.? species populated the ³C₆₀* prior to returning to the ground state, while in polar solvent no such process was observed due to relative positioning of the energy levels. The ¹BODIPY* generated radical ion‐pair in these triads persisted for few nanoseconds due to electron transfer/hole‐shift mechanism.     

Acetic acid catalysed solvent-free synthesis of spiro-isoxazolo[5,4-b]pyridines/quinolines by mechano-chemical grinding

A simple and efficient three-component procedure has been developed for the synthesis of a series of spiro-isoxazolo[5,4-b]pyridines/quinolines by one-pot condensation of isatins, 3-methylisoxazol-5-amine and enolizable cyclic carbonyl compounds. The protocol has been accomplished under solvent-free conditions by grinding the components at room temperature in presence of catalytic CH₃COOH. The described process offers environmentally benign reaction conditions for the synthesis of pharmacologically important spirooxindole fused heterocycles with the advantages ofoperational simplicity, short reaction time and good to excellent yields of isolated pure product.     

Nickel‐Catalyzed α‐Carbonylalkylarylation of Vinylarenes: Expedient Access to γ,γ‐Diarylcarbonyl and Aryltetralone Derivatives

We report a Ni‐catalyzed regioselective α‐carbonylalkylarylation of vinylarenes with α‐halocarbonyl compounds and arylzinc reagents. The reaction works with primary, secondary, and tertiary α‐halocarbonyl molecules, and electronically varied arylzinc reagents. The reaction generates γ,γ‐diarylcarbonyl derivatives with α‐secondary, tertiary, and quaternary carbon centers. The products can be readily converted to aryltetralones, including a precursor to Zoloft, an antidepressant drug.     

Porous solgel fiber as a transducer for highly sensitive chemical sensing

A novel solgel process for making porous silica fiber and doping the fiber core with sensing material is described. A CoCl(2) -doped solgel fiber was fabricated and was used to construct an active-core optical fiber moisture sensor. Test results show that the sensitivity of the active-core optical fiber sensor is much higher than that of an evanescent-wave-based optical fiber sensor.