SWITRIM��������ƺ�ʹ�øſ�

研制出了用于计算氚投料量在FEB聚变堆各个子系统中的分布及其随时间变化的数值模拟程序包SWITRIM。通过近5年的使用，表明其运行良好、计算结果可靠。用SWITRIM数值模拟研究了聚变堆起动过程中的“氚坑深度和氚坑时间”新现象。简单介绍了SWITRIM程序包的组成和用户使用说明以及最新的运用等。     

新型高吸水聚合物凝胶型屏蔽暂堵剂MTC-1的合成及性能

以丙烯酸（AA）、丙烯酰胺（AM）、2-丙烯酰胺基-2-甲基丙磺酸（AMPS）为原料，蒙脱土（MMT）为改性剂，过硫酸钾和无水亚硫酸氢钠为氧化还原引发体系，六亚甲基四胺（C₆H₁₂N₄）为交联剂，采用水溶液聚合法合成了一种新型高吸水聚合物凝胶型屏蔽暂堵剂（MTC 1），其结构经IR表征。在最优合成条件（AM/AMPS/AA=11/7/1, m/m/m，引发剂加量0.6 wt%，于45 ℃反应2.5 h）下，MTC-1的最大吸水倍率为1006倍。岩心流动实验结果表明：MTC-1的堵水性能较高，封堵效率达到83.72%。     

共沉淀浸渍法制备由合成气直接合成二甲醚的Cu-Mn催化剂

采用共沉淀浸渍法,制备了直接合成二甲醚的Cu-Mn-Zn催化剂,通过对组成成分及其配比的研究,发现Cu含量一定的条件下,n(Zn)/n(Mn)摩尔比对催化剂性能有较大的影响,当n(Zn)/n(Mn)=1/3～1/2时,催化剂对CO的转化率和对二甲醚的选择性达到最佳,分别为53.6%和63.5%；如锰添加比例过大,对催化剂催化合成二甲醚有微弱抑制；添加锌比例过大,会大大降低CO的转化率。载体Y分子筛的含量对催化剂性能也有影响,用量过大将降低催化剂的活性和对二甲醚的选择性,当其含量为33%时,催化剂上CO转化率和选择性可分别达到66%和68%,且催化剂活性随分子筛含量减少不再有明显的变化。     

Criticalp-Laplacian problems in RN

Summary The main theorem establishes the existence of a positive decaying solution u D ₀ ^1,p (Rⁿ) of a quasilinear elliptic problem involving the p-Laplacian operator and the critical Sobolev exponent pN/(N - p), 1相似文献   

Identification and quantification of 13 components in Angelica sinensis (Danggui) by gas chromatography-mass spectrometry coupled with pressurized liquid extraction

Angelica sinensis (Danggui in Chinese), a well-known traditional Chinese medicine, is also used as a health food product for women's care in Europe and America. Therefore, the demand for Danggui is enormous throughout the world. Due to the shortage of Angelica sinensis, Angelica acutiloba and Angelica gigas are commonly used as the substitutes of Danggui in the market of southeast Asia. However, the three common Angelica roots showed variation in their genetic and chemical composition. Up to date, it is thought that ferulic acid, ligustilide and other phthalides such as butylidenephthalide are the biologically active components of Danggui. In this paper, the contents of 13 compounds including ferulic acid, Z-ligustilide, E-ligustilide, Z-butylidenephthalide, E-butylidenephthalide, 3-butylphthalide, 3-butylidene-4-hydroxyphthalide, senkyunolide A, 6,7-epoxyligustilide, senkyunolide F, senkyunolide H, senkyunolide I, and 6,7-dihydroxyligustilide were determined or estimated by using gas chromatography-mass spectrometry (GC-MS) coupled with pressurized liquid extraction (PLE). The results showed that GC-MS coupled with PLE offered a simple, rapid and high sensitive method to analysis of components in Angelica root. And the contents of investigated compounds in Angelica sinensis, Angelica acutiloba and Angelica gigas, which are used as Danggui in China, Japan and Korea, respectively, were highly variant. It is thought that interaction of multiple chemical compounds contributes to the therapeutic effects of Chinese medicines. However, the overall clinical efficacy of these different Danggui has not been determined. Therefore, comparison of chemical components and pharmacological activities of different Angelica root is helpful to elucidate the mechanism of therapeutic effects of Danggui.     

Interference of Transformer oil Matrices to the Internal Standards on PCB Quantification

Abstract

Polychlorinated biphenyls (PCBs) are toxic, perssstent, global environmental contaminants which were formulated as complex mixtures of congeners. Many methods have been developed in the past to analyze PCB in transformer oil samples for regulatory purposes. The most important consideration in the cleanup procedure is the ability to remove the oil from the sample matrix, since trace amount of oil will interfere with the subsequent GC-MS analysis. Electron capture detection (ECD) has been the most common method for gas chromatographic analysis of PCBs because of its high sensitivity toward halogenated compounds. ECD can also respond to some non-PCB compound resulting in biased concentrations of PCB. In this work, a two-stage cleanup method, using DMSO liquid/liquid extraction and HPLC column chromatography. has been applied to two types of transformer oil. Five internal standards have been selected to show their performance in the presence of different oil matrices. The comparison of the PCB quantification at different conditions for GC-MS and GC-ECD will be demonstrated.     

Combined effect of modified zeolite 13X and β-nucleating agent on improving β-crystal content and toughening polypropylene random copolymer

Although addition of β-NUCLEATING agent directly into homo-polypropylene(PPH) is a useful method to improve β-CRYSTAL content and toughen PPH, polypropylene random copolymer(PPR) makes this method powerless due to its random structure and low crystallinity. In this study, the-nucleated PPR with high β-CRYSTAL content was prepared by a novel high effective β-NUCLEATING system which consists of-nucleation agent(TMB-5) and modified zeolite 13X(M13X). It was found that M13X and TMB-5 had a synergistic influence on improving β-CRYSTAL content and toughening PPR. The content of β-CRYSTAL in PPR/M13X/TMB-5 was significantly larger than the sum of that in PPR/M13X and PPR/TMB-5. Besides,fracture behavior, phase morphology and relaxation of matrix chain segments were also investigated. The results showed that M13X and TMB-5 improved the mobility of amorphous chain segments at low temperature and contributed to much energy dissipation. This work provides a powerful method to modify PPR.     

Electrochemical Determination of Tyrosine Using Graphene and Gold Nanoparticle Composite Modified Glassy Carbon Electrode

Russian Journal of Electrochemistry - A electrochemical sensor based on graphene and gold nanoparticles modified glassy carbon electrode (GCE) was developed for the determination of tyrosine (Tyr)....     

Non-collinear efficient continuous optical frequency doubling in periodically poled lithium niobate

Non-collinear continuous frequency doubling with relatively high conversion efficiency is demonstrated in periodically-poled lithium niobate. It is shown that about 80% of the total second harmonic energy can be collected to one output channel by tuning incident angle. The fractional phase-matching condition is introduced to interpret the phenomenon. These results make it possible for direct power applications of continuous frequency doubling over the broad spectral range from the visible to the infrared without temperature or angle tuning.