Partition Lattice q-Analogs Related to q-Stirling Numbers

We construct a family of partially ordered sets (posets) that are q-analogs of the set partition lattice. They are different from the q-analogs proposed by Dowling [5]. One of the important features of these posets is that their Whitney numbers of the first and second kind are just the q-Stirling numbers of the first and second kind, respectively. One member of this family [4] can be constructed using an interpretation of Milne [9] for S[n, k] as sequences of lines in a vector space over the Galois field F _q. Another member is constructed so as to mirror the partial order in the subspace lattice.     

Fluorescence-dip infrared spectroscopy and predissociation dynamics of OH A 2Sigma+ (v = 4) radicals

Fluorescence-dip infrared spectroscopy, an UV-IR double-resonance technique, is employed to characterize the line positions, linewidths, and corresponding lifetimes of highly predissociative rovibrational levels of the excited A (2)Sigma(+) electronic state of the OH radical. Various lines of the 4 <--2 overtone transition in the excited A (2)Sigma(+) state are observed, from which the rotational, centrifugal distortion, and spin-rotation constants for the A (2)Sigma(+) (v = 4) state are determined, along with the vibrational frequency for the overtone transition. Homogeneous linewidths of 0.23-0.31 cm(-1) full width at half maximum are extracted from the line profiles, demonstrating that the N = 0 to 7 rotational levels of the OH A (2)Sigma(+) (v = 4) state undergo rapid predissociation with lifetimes of < or =23 ps. The experimental linewidths are in near quantitative agreement with first-principles theoretical predictions.     

The European Eco-Management and Audit Scheme Accreditation – an overview

 Environmental quality is still deteriorating in the EU and worldwide despite all the Directives and Regulations in this field over the past 20 years. The European Community has devised a new approach to this problem with the introduction of the Eco-Management and Audit Scheme Regulation. This Regulation provides industry with an opportunity to demonstrate that it can achieve continuous improvement in its environmental performance through a voluntary scheme which is not based on the traditional command and control mechanisms of Directives. This paper gives an overview of the steps involved in implementing the European Eco-Management and Audit Scheme and the role of accreditation in supporting the scheme.     

Heterogeneous oxidation of pyrimidine and alkyl thioethers in ionic liquids over mesoporous Ti or Ti/Ge catalysts

Heterogeneous catalytic oxidation of a series of thioethers (2-thiomethylpyrimidine, 2-thiomethyl-4,6-dimethyl-pyrimidine, 2-thiobenzylpyrimidine, 2-thiobenzyl-4,6-dimethylpyrimidine, thioanisole, and n-heptyl methyl sulfide) was performed in ionic liquids by using MCM-41 and UVM-type mesoporous catalysts containing Ti, or Ti and Ge. A range of triflate, tetrafluoroborate, trifluoroacetate, lactate and bis(trifluoromethanesulfonyl)imide-based ionic liquids were used. The oxidations were carried out by using anhydrous hydrogen peroxide or the urea-hydrogen peroxide adduct and showed that ionic liquids are very effective solvents, achieving greater reactivity and selectivity than reactions performed in dioxane. The effects of halide and acid impurities on the reactions were also investigated. Recycling experiments on catalysts were carried out in order to evaluate Ti leaching and its effect on activity and selectivity.     

Investigation of novel mediators for a glucose biosensor based on metal picolinate complexes

The metal complexes [Os(byp)(2)(pic)](+) and [Ru(byp)(2)(pic)](+) where byp is 2,2'-bipyridine and HPic is o-picolinic acid were synthesised and characterised using spectroscopic and electrochemical techniques. These complexes were then evaluated as mediators for a glucose oxidase (GOx)-based biosensor. Results demonstrate the electrocatalytic behaviour of both metal couples towards regeneration of the flavoprotein GOx (FADH(2)) group, when co-immobilised with glucose oxidase. Surface immobilisation was achieved by potential cycling in aqueous solutions of the metal complexes at a glucose oxidase (GOx)/Nafion modified electrode. This proved successful in terms of catalytic efficiency and stability of redox sites. Kinetic parameters associated with both enzymatic and mediator reactions were estimated and the stability/performance properties of the sensor were tested.     

Improved detection of the histamine receptor on human peripheral blood mononuclear cells by crosslinking using tritiated as compared with radioiodinated histamine

In order to detect histamine receptors on the surface of human peripheral blood mononuclear cells, the cells were incubated in the presence of radiolabelled histamine and then the bifunctional crosslinker disuccimidyl suberate was added in various concentrations. They were then solubilized with sodium dodecyl sulphate, boiled, reduced and the lysate separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Both 3H and 125I-radiolabelled ligands bound to a 16 kDa band, to be defined although a much clearer and obviously unequivocal signal was obtained with 3H-labelled histamine. This molecule migrated with the same mass on sodium dodecyl sulfate-polyacrylamide gel electrophoresis as a 16 kDa subunit which had been purified on a histamine affinity column from Triton X-100 solubilized mononuclear cells, indicating it to be the ligand-binding subunit for the histamine receptor on these cells. For 3H, fluorography with Entensify was required to obtain an autoradiographic signal. Although 3H took much longer to give a signal than 125I, the considerable background, artefacts and heavy lane trailing seen with [125I] histamine were completely abrogated when [3H]histamine was used. In addition, the distinction between specific and nonspecific binding was more clearly seen using [3H]histamine. The modifications reported here which improve signal detection for 3H should encourage the use of tritiated ligands in radioreceptor crosslinking, particularly those of low molecular weight which might otherwise undergo steric modification due to iodination, this having the potential for interfering with receptor ligand binding.     

Solid State NMR and TG/MS Study on the Transformation of Methyl Groups During Pyrolysis of Preceramic Precursors to SiOC Glasses

The sol-gel method was used to prepare two different starting gels containing SiCH₃-groups for the preparation of SiOC ceramics. To understand the role of Si—H bonds in the incorporation of carbon into the SiOC network, gels prepared from a 1:2 mixture of triethoxysilane and methyldiethoxysilane (T^HD^H2) and solely methyltriethoxysilane (T^Me) were investigated. Thermogravimetric analysis coupled with mass spectroscopy (TG-MS) in inert atmosphere was performed to attain an insight into the decomposition reactions involved during gel-glass transformation. Samples calcined at different temperatures up to 1000°C were characterized by ²⁹Si and ¹³C magic angle spinning nuclear magnetic resonance (MAS-NMR) spectroscopy. The presence of SiH groups in the starting gel allows an efficient conversion of Si—CH₃ groups into CSi₄ sites at lower temperatures. As a result, despite a much lower amount of carbon in the starting T^HD^H2 gel (C/Si = 0.33) compared to the T^Me gel (C/Si = 1), the amount of carbon inserted into the SiOC network of both glasses is equivalent, but the T^Me sample contains the 10 fold amount of free carbon.     

Characterization of molybdenum carbide nanoparticles formed on Au(111) using reactive-layer assisted deposition

Temperature programmed desorption (TPD), Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), and scanning tunneling microscopy (STM) have been used to characterize molybdenum carbide nanoparticles prepared on a Au(111) substrate. The MoC(x) nanoparticles were formed by Mo metal deposition onto a reactive multilayer of ethylene, which was physisorbed on a Au(111) substrate at low temperatures (<100 K). The resulting clusters have an average diameter of approximately 1.5 nm and aggregate in the fcc troughs located on either side of the elbows of the reconstructed Au(111) surface. Core level XPS shows that the electronic environment of the Mo and C atoms in the nanoparticles is similar to that found in Mo(2)C(0001) single crystals and carburized Mo metal surfaces. Peak intensities in XPS and AES spectra were used to estimate an average Mo/C atomic ratio of 1.2 +/- 0.3 for nanoparticles annealed above 600 K.     

Improved RP‐HPLC method for determination of bovine lactoferrin and its proteolytic degradation in simulated gastrointestinal fluids

The objective of this study was to qualitatively and quantitatively evaluate bovine lactoferrin (bLf) and its stability using a rapid RP‐HPLC method. bLf could be rapidly detected within 20 min and quantitated at levels down to 5 µg/mL, and the equation of linearity was y = 86.10x + 178.31 with the correlation coefficient (r²) 0.9997. Quantitative data obtained in the present study proved the improved RP‐HPLC method to be a sensitive and accurate analytical tool for bLf determination. The proteolytic cleavage of bLf in simulated human gastrointestinal fluids was further analyzed by RP‐HPLC, and found to follow pseudo‐first‐order kinetics. The typical equation obtained by pepsin was log₁₀ [A_t]/[A₀] = ?0.03x (r² = 0.85), and log₁₀ [A_t]/[A₀] = ?0.01x (r² = 0.81) for trypsin and chymotrypsin combination. Pepsinolysis of bLf in simulated gastric fluid was relatively fast with the half‐life t_1/2 23.1 min. The digestion of bLf in simulated intestinal fluid was slower with about a 3‐fold increase in half‐life (69.3 min). After the complete proteolysis of bLf, small cleaved peptide fragments were fully separated and identified by RP‐HPLC. The proteolytic study indicated that this validated RP‐HPLC was able to evaluate bLf stability though monitoring the derivatization products. Copyright © 2012 John Wiley & Sons, Ltd.