General Formation of Macro-/Mesoporous Nanoshells from Interfacial Assembly of Irregular Mesostructured Nanounits

Mesoporous core–shell nanostructures with controllable ultra-large open channels in their nanoshells are of great interest. However, soft template-directed cooperative assembly to mesoporous nanoshells with highly accessible pores larger than 30 nm, or even above 50 nm into macroporous range, remains a significant challenge. Herein we report a general approach for precisely tailored coating of hierarchically macro-/mesoporous polymer and carbon shells, possessing highly accessible radial channels with extremely wide pore size distribution from ca. 10 nm to ca. 200 nm, on diverse functional materials. This strategy creates opportunities to tailor the interfacial assembly of irregular mesostructured nanounits on core materials and generate various core–shell nanomaterials with controllable pore architectures. The obtained Fe,N-doped macro-/mesoporous carbon nanoshells show enhanced electrochemical performance for the oxygen reduction reaction in alkaline condition.     

The equivalence between the convergence of Ishikawa and Mann iterations with errors for strongly successively pseudocontractive mappings without Lipschitzian assumption

In this paper we prove some new equivalences between convergence of the Ishikawa and Mann iteration sequences with errors in two schemes by Xu [Y.G. Xu, Ishikawa and Mann iteration process with errors for nonlinear strongly accretive operator equations, J. Math. Anal. Appl. 224 (1998) 91-101] and Liu [L.S. Liu, Ishikawa and Mann iterative process with errors for nonlinear strongly accretive mappings in Banach spaces, J. Math. Anal. Appl. 194 (1995) 114-125], respectively, for strongly successively pseudocontractive mappings. Our main results improve and extend the corresponding results of the all references listed in this article.     

Single-molecule single crystals

Various approaches to the preparation and verification of single-molecule single crystals are discussed for polyethylene and poly (oxyethylene). Analytic tools are electron microscopy, electron diffraction, and differential scanning calorimetry. The main difficulty in producing a single-molecule single crystal is to keep crystals from joining during growth.     

500.8 nmNd∶YAG青光激光器光学薄膜的设计与制备

从双波长激光运转及和频的机理出发，对LD泵浦Nd∶YAG，LBO腔内和频500.8 nm〖JP2〗青光激光器所使用的光学薄膜进行了设计和制备.在激光反射镜的设计上，为了达到最佳的和频输出，对膜系要求进行了深入分析.采用对谐振腔一端面反射率固定不变并通过对另一腔镜基频光的透射率进行调谐的方法, 在给出合理初始结构后，利用计算机对膜厚进行了优化.并采用双离子束溅射沉积的方法，通过时间监控膜厚法成功制备出青光激光器所使用的全介质激光反射膜, 在室温下实现946 nm和1064 nm双波长连续运转，并通过Ⅰ类临界相位匹配LBO晶体腔内和频在国内首次实现500.8 nm青色激光连续输出.当泵浦注入功率为1.4 W时和频青光最大输出达20 mW.     

Current and shot noise in two capacitively coupled single electron transistors with an atomic sized spacer

The currents and their fluctuations in two capacitively coupled single electron transistors are determined in the limit of sequential tunnelling. Our considerations are restricted to the case when the islands (dots) of the transistors are atomic-sized, which means each of them has only one single electronic level available for the tunnelling processes. The Coulomb interactions of accumulated charges on the both single electron transistors lead to the effect of the negative differential resistance. An enhancement of the current shot-noise was also found. Spectral decomposition analysis indicated the two main contributions to the shot-noise: low- and high-frequency fluctuations. It was found that the low frequency fluctuations (polarization noise) are responsible for a strong enhancement of the current noise. Received 9 October 2001 / Received in final form 8 March 2002 Published online 9 July 2002     

酞菁（H_2TAP）的X－射线光电子能谱（XPS）

酞菁（Ｈ_２ＴＡＰ）的Ｘ－射线光电子能谱（ＸＰＳ）朱志昂，卜显和，刘月霞（南开大学化学系天津３０００７１）ＰａｕｌＧ．Ｇａｓｓｍａｎ（美国明尼苏达大学化学系）关键词酞青，ＸＰＳ，Ｃ１ｓ电子结合能，Ｎ１ｓ电子结合能酞菁及其金属配合物作为叶绿素，血红素的?..     

Single-Molecule single crystals of isotactic polystyrene

Single-molecule single crystals were grown from amorphous droplets of fractionated isotactic polystyrene. The crystals were analyzed by electron microscopy and electron diffraction. The molecular mass distribution could be matched with a statistical analysis of single-molecule particles (amorphous and crystals). Proof was brought that single molecules of isotactic polystyrene do not reach equilibrium dimensions on crystallization, rather assume the lamellar morphology with chain-folded macroconformation, also known from crystallization of polymolecular crystals. © 1994 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America. US Government contract No. DE-AC05-840R-21400.

     

Hydrothermal synthesis, crystal structures and luminescent properties of two new Ln(III)–succinate (Ln=Eu, Tb) complexes exhibiting three dimensional networks

Two new coordination polymers, [Eu₂(L)₃(H₂O)₂]_n 1 and {[Tb₂(L)₃(H₂O)₂]·H₂O}_n 2, (H₂L=succinic acid) have been synthesized by the reaction of H₂L with nitrate salts of Eu(III) or Tb(III) under hydrothermal conditions. The X-ray diffraction analysis reveals that the two complexes are constructed by L bridging the chains of edge-sharing EuO₈(H₂O) or TbO₈(H₂O) polyhedra to form 3D network structure. 1 and 2 possess different topological structures due to the difference in the conformations of L. The solid photoluminescence of 1 and 2 was also investigated in room temperature.